LOGICDATA SILVERsensor Manuel utilisateur
SILVERsensor
Manual
Document Version 3
February 2020
SILVERsensor Manual
2
Contents
1. Introduction................................................................................... 3
2. Safety ............................................................................................. 6
3. Box Contents ...............................................................................12
4. Safety During Assembly ............................................................13
5. Indentify Your Bed ......................................................................14
6. Assembly: Standard Variant......................................................16
7. Assembly: Lite Variant................................................................18
8. Operation via the App...............................................................20
9. Additional Information ..............................................................23
SILVERsensor Manual 3
1. Introduction
i.
About SILVERsensor
Thank you for choosing SILVERsensor by LOGICDATA. With
SILVERsensor, every eort has been made to ensure your comfort
and safety. This Manual is intended to enable persons to assemble
and operate the product safely. However, incorrect installation of
the product, or usage outside of the intended use described in this
Manual may lead to hazardous situations. In Chapter 2, “Safety”,
and throughout this Manual, potential risks, their consequences,
and steps to avoid harm are explained.
Observing the safety instructions in this Manual will help you to
avoid hazards and minimize damage to the system. All persons
involved in the assembly of the system must have the full product
documentation available to them at all times. Product documentation
consists of this Manual and any other relevant documents supplied
by the manufacturer. Documentation must always be kept complete
and legible.
In this manual, you will find important information that will help you
install the product correctly and safely. Important safety instructions
are included in Chapter 2 of this Manual. You are required to
read all safety instructions carefully before installing or operating
SILVERsensor.
ii.
Copyright
Copyright® This original documentation is protected by copyright.
All rights, especially the rights to translate or reproduce the
document, are reserved. No part of this manual may be reproduced
mechanically, electronically, or by other means, in any form, without
prior written permission of LOGICDATA Electronic & Software
Entwicklungs GmbH. Violations involving copyright may result in
legal action.
2020 LOGICDATA Electronic & Software Entwicklungs GmbH
SILVERsensor Manual
4
iii.
Liability
The descriptions of product characteristics in this Manual are not a
guarantee of the presence of these characteristics. LOGICDATA is
not liable for damage or injury caused by:
• Improper product use
• Disregard of the documentation
• Unauthorized product alterations
• Improper work on and with SILVERsensor or the Bed Frame
• Operation of damaged products
• Improperly performed repairs
• Unauthorized changes to the operating parameters
• Disasters, external influence, and force majeure
LOGICDATA assumes no liability for technical or printing errors,
for deficiencies in this documentation, or for damages caused
directly or indirectly by the delivery, performance, or usage of this
documentation.
iv.
Contact Information
LOGICDATA Electronic & Software-Entwicklungs GmbH
Wirtschaftspark 18
8530 Deutschlandsberg
Austria
LOGICDATA North America Inc.
5300 Broadmoor Ave SE, Suite D
Grand Rapids, MI 49512 USA
T: +1 616 328 8841
SILVERsensor Manual 5
v.
Other Information
Loi 101
The Charter of the French Language (La charte de la langue
française) or Bill 101 (Loi 101) guarantees the right of the population
of Quebec to conduct business and commercial activities in
French. The bill applies to all products sold and used in Quebec.
For products that will be sold or used in Quebec, Resellers must
provide all product-relevant texts in French. These include, but are
not limited to:
• Manuals
• All other product documentation, including datasheets
• Inscriptions on the product (such as labels), including
those on product packaging
• Warranty certificates
The French inscription may be accompanied with a translation or
translations, but no inscription in another language may be given
greater prominence than that in French.
Cet appareil numerique de la classe B est conforme a la norme
NMB-003 du Canada.
This Class B digital apparatus complies with Canadian ICES-003.
FCC Compliance
The Radio Frequency for this product is 2.4 GHz
The SILVERsensor by LOGICDATA complies with FCC CFR 47 Part
15 Subpart B/C. Operation is subject to the following conditions:
The product may not cause harmful interference
The product must accept any interference received, including
interference that may cause undesired operation
To comply with the FCC RF exposure compliance requirements, you
may not make any changes to the product or the antenna. Changes
to the antenna or the product could result in the product exceeding
the RF exposure requirements. This may void your authority to use
the product.
SILVERsensor Manual
6
2. Safety
IMPORTANTSAFETYINSTRUCTIONS
i.
About this Document
This Manual is intended to help users safely install the SILVERsensor
by LOGICDATA. It also contains instructions for operating the Bed
Frame to which the SILVERsensor is connected using a mobile App.
This Manual does not include instructions or safety advice for
assembling the Bed Frame, or for operating the Bed Frame using
the Remote Control, or through applications other than the mobile
App. You must also read the documentation for your Bed Frame
in full before installing the SILVERsensor or using the Bed Frame.
ii.
General Safety Information
The following safety regulations and obligations are valid when
handling the system:
• Do not operate the Bed Frame unless it is in full working order
• Do not remove, change, bridge, or bypass any protection or
safety features
• Do not convert or modify the Bed Frame without written
approval
• Do not use unauthorized spare parts for repair
• Only physically able adults are allowed to assemble the product
• Do not attempt to change or replace parts unless the product is in
a de-energized state
• Ensure that no children or animals are in the proximity of the
Bed Frame when operating it
• Ensure nothing obstructs the Bed Frame’s range of motion (e.g.
night stands or open windows)
• Do not sit directly on any Platform when operating the Bed
Frame. Distribute your weight evenly
SILVERsensor Manual 7
iii.
Explanation of Symbols and Signal Words
DANGER
The signal word DANGER
indicates a hazardous situation
which, if not avoided, will result
in death or serious injury.
WARNING
The signal word WARNING
indicates a hazardous situation
which, if not avoided, could
result in death or serious injury.
CAUTION
The signal word CAUTION
indicates a hazardous situation
which, if not avoided, could
result in minor or moderate
injury.
NOTICE
The signal word NOTICE
indicates a situation that will
not lead to personal injury, but
could lead to damage to the
product or the environment.
SILVERsensor Manual
8
iv.
Residual Risks
DANGER
To reduce the risk of electric
shock:
• Always unplug the Bed Frame
from the electrical outlet
before cleaning.
WARNING
To reduce the risk of burns, fire, electric shock, or injury
to persons:
• Unplug the Bed Frame from the outlet before putting on
or taking o parts.
• Close supervision is necessary when the Bed Frame is
used by, or near children, invalids, or disabled persons.
• Use this Bed Frame only for its intended use as
described in these instructions. Do not use attachments
not recommended by the manufacturer.
• Never operate the Bed Frame if it or any parts have a
damaged Cable or Plug, are not working properly, have
been dropped or damaged, or dropped into water.
Return the bed for examination and repair or replace it.
• Keep all Cables away from heated surfaces.
• Never drop or insert any object into any opening.
• Do not use outdoors.
• Do not operate the Bed Frame where aerosol (spray)
products are being used or where oxygen is being
administered.
• To disconnect the Bed Frame, turn all controls to the o
position, then remove plug from outlet.
• WARNING: Risk of injury – keep children away from the
extended foot support (or other similar parts).
SILVERsensor Manual 9
WARNING
Moderate risk of death or
serious injury
The maximum allowed load on
your Bed Frame is specified in
its Manual. Overloading the Bed
Frame, or any single Platform,
may lead to death or serious
injury.
• Do not overload the Bed
under any circumstances
• Do not stand on the Bed
Frame
• Do not apply the maximum
load to the Foot or Head
Platforms
• Do not sit on the mattress whi-
le the Bed Frame is in motion.
Distribute your weight evenly
WARNING
Moderate risk of death or
serious injury
Opening electrical components,
or attempting improper conver-
sions or modifications to electri-
cal or mechanical components
on the Bed Frame may lead to
death or serious injury.
• Do not convert or modify
the Adjustable Bed Frame
• Never open electrical
components
SILVERsensor Manual
10
WARNING
Moderate risk of death or
serious injury in explosive
atmospheres
Operating the SILVERsensor
in potentially explosive atmo-
spheres may lead to death or
serious injury through explo-
sions.
•
Read the relevant directives
to determine whether an
atmosphere is potentially
explosive
•
Do not operate the Bed
Frame in potentially explosive
atmospheres
WARNING
Moderate risk of death or
serious injury through crushing
When the Bed Frame moves
to a new position, it is possible
that persons will be crushed
between the Bed Frame and
foreign objects.This may lead to
death or serious injury.
• Do not store foreign objects
underneath the Bed Frame
• Ensure nothing obstructs the
Bed Frame’s range of motion
(e.g. night stands or open
windows)
Table des matières
Autres manuels LOGICDATA Accessoires
