1. To avoid serious injury to a person or
damage to the jump starter, never attempt to
connect the two clamps together. Connecting
the positive and negative poles of the wiring
will lead to short-circuiting, which is very
dangerous.
2. Important: When using the device, only the
original charger and clips that come with it
are allowed. Please confirm that the clips of
the jump starter clamp the positive and
negative poles of the car battery correctly. If
the positive and negative terminals are
reversed, it will cause damage to the vehicle.
Smart Clamps
Smart clamps have multiple protection functions including
Short Circuit Protection, Over Discharge Protection, Reverse
Connection Protection, Reverse Charge Protection, Input Low /
High Voltage Protection, High Temperature Protection and so
on.
5.) After successfully starting your car, remove clamps and
pack away.
4.) Start your engine.
Operational
Warnings
05 06
3. Please fully charge the device before the
first time use. And recharge it at least once
every three months to prolong its life span if
you don’t use it for a long time.
4. Avoid overpressure. Please check the car
voltage carefully. For example, a 12V jump
starter can start a 12V car but not a 24V
diesel car.
5. Please don’t start the car continuously,
between starting twice you should allow an
interval of at least 30 seconds to 1 minute.
6. Please don’t charge the device immedi-
ately after starting the car to avoid damage
to the battery.
7. Please turn off unneeded appliances
before starting your car with the device, such
as car air conditioners, headlights,
high-power speakers, and devices on the
cigarette lighter. It will help start the car in an
easier way.
