5) Mark and edit waypoints, and create a route
(refer to Mark, Waypoint, and Route pages for
details)
GT-11/BGT-11 can now tell you:
zWhere you are
zWhere you have been
zWhere you are going
zHow did you made up your trip, and
zMany other interesting possibilities…….
GT-11/BGT-11 is designed for easy operation. If this is the first time you have owned a GPS navigator, just
follow the instructions in the following pages and you will be quickly become familiar with this unit.
Before Getting Started
The greatest discovery of my generation
is that a human being can alter his life by
altering his attitudes of mind.
William James (1842-1910)
Before Use
1) Charge the battery. It takes around 4 hours for
the built-in battery to charge fully.
2) Initialize the receiver. Leave the
GT-11/BGT-11S outside with a clear view of sky
until it has fixed its position. After that, it
needs only around 45 seconds to find its
location. When the unit has not been used for
long time, or it’s taken to a far distance from
where you initialized it, you will need to
re-initialize the unit before use.
3) Configure the system. Set up the parameters
under the Settings page. The system will store
your configuration on its built-in flash memory.
4) Consult with your dealer or contact us, if
you have any question about setting up the
GT-11/BGT-11. We will be pleased to assist
get familiar with the unit.
