Lock'er Down 2012 Manuel utilisateur
Installation Instructions for Model 2012 Console Safe
Lock'er Down® is a registered Trademark of Lock'er Down, Inc. US Reg. Number 4183198 All Rights reserved.
First remove the cover on the underside
of the console lid to expose the four
screws attaching the lid to the hinge.
On either end of the hinge is a plastic cover
that must be removed next. You can use a
small screw driver or even a finger nail.
Detailed photos on back.
Now, remove the two bolts holding the console to
the truck body. You will need a 10MM socket.
Place the Lock’er Down Console Safe inside the console and attach to the
truck body through the console with the supplied longer bolts.
Reverse the procedure above to reinstall the console hinge and lid.
We hope you enjoy.
X X
Red X’s mark plastic covers that must be removed tp access
hinge screws.
Table des matières
Autres manuels Lock'er Down Sûr
Manuels Sûr populaires d'autres marques
Honeywell
Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Manuel utilisateur
Hornady
Hornady SnapSafe Trunk Safe II Manuel utilisateur
SPORTS AFIELD
SPORTS AFIELD SA-HD5-BIO Manuel utilisateur
Honeywell
Honeywell 5912 Manuel utilisateur
Phoenix
Phoenix FS1280F Manuel utilisateur
Phoenix
Phoenix SS0992K Fiche d'information produit
