LIVOLTEK Hyper Series Manuel utilisateur
Operating Manual
Low Voltage Hyper Series
Version: HYPER-LV-1P-AU-1.14
CONTENTS
1. About This Manual ................................................................................ 1
1.1 Products Covered by This Manual ............................................... 1
1.2 Target Group.............................................................................. 1
1.3 Symbols Used............................................................................. 1
1.4 Storage of the Manual................................................................ 1
2. Safety.................................................................................................... 2
2.1 Intended Use.............................................................................. 2
2.2 Important Safety Instructions ....................................................... 2
3. Scope of Delivery .................................................................................. 4
4. Product Description ............................................................................... 6
4.1 View of the Inverter..................................................................... 6
4.2 System Diagram......................................................................... 8
4.3 Operating Mode Introduction ..................................................... 8
5. Mounting ............................................................................................ 12
5.1 Requirements for Mounting....................................................... 12
5.2 Mounting the Inverter ............................................................... 14
6. Electrical Connection ........................................................................... 16
6.1 Wiring Diagram ....................................................................... 16
6.2 Overview of the Connection Area ............................................. 17
6.3 PV Connection.......................................................................... 18
6.4 Grid Connection ...................................................................... 19
6.5 EPS Connection........................................................................ 20
6.6 Battery Connection ................................................................... 21
6.7 Smart Meter Connection........................................................... 23
6.8 WiFi Stick Connection ............................................................... 25
6.9 DRM Connection ...................................................................... 25
7. Operating of the Inverter ..................................................................... 26
7.1 LEDs and Graphical Display ..................................................... 26
7.2 Commission ............................................................................. 28
7.3 Decommission.......................................................................... 29
7.4Settings on the LIVOLTEK APP ................................................... 30
8. Troubleshooting................................................................................... 37
9. Technical Data .................................................................................... 39
9.1 Hyper 2000/3000 ......................................................................... 39
9.2 Hyper 3680/4600/5000 ............................................................... 42
9.3 Certificates and Grid Regulations................................................... 44
Contacts:.................................................................................................... 45
1
1. About This Manual
1.1 Products Covered by This Manual
Hyper Series Low Voltage Solar Hybrid Inverter:
Hyper 2000, Hyper 3000, Hyper 3680, Hyper 4600, Hyper 5000.
1.2 Target Group
This document is intended for qualified electrician. Any electrical installation
and maintenance on this inverter must be performed by qualified electricians in
compliance with standards, wiring rules or requirements of local grid authorities
or bodies.
1.3 Symbols Used
The following types of safety precautions and general information symbols are
used in this manual. These important instructions must be followed during
installation, operation and maintenance of the inverter.
Indicates a hazard with a high level of risk
that will result in death or serious injury.
Indicates a hazard with a medium level of
risk that can result in death or serious injury.
Indicates a hazard with a low level of risk
that can result in minor or moderate injury.
Indicates a situation which, if not avoided,
can results in property damage.
1.4 Storage of the Manual
The manual should be stored with other documents belonging to the inverter
and must be available to people authorized to work on the installation.
This manual will be updated if necessary. Please check www.livoltek.com for more information.
2
2. Safety
2.1 Intended Use
The Hyper Series are single phase solar hybrid inverters suitable for both on-
grid and off-grid operation. With Lithium batteries, PV panels and a smart
meter, the hybrid inverter is the central device to make a solar storage system
for increased self-consumption.
The Hyper Series must only be connected with a LIVOLTEK lithium battery.
To prevent personal injury and property damage and to ensure long-term
operation of the product, please read and follow all the instructions and
cautions on the inverter and this user manual during installation, operation or
maintenance at all times.
2.2 Important Safety Instructions
Danger to life from electric shock.
•Before performing any work on the inverter, disconnect all DC and AC
power from inverter and wait for at least 5 minutes.
•Do not touch DC conductors or any non-isolated cable ends.
•If an error occurs, contact your local distributor or qualified electricians.
•Make sure the inverter is not touchable from children.
Risk of burns from hot surfaces.
•The surface of the inverter might exceed 60℃, touching the surface may
result in burns.
•Do not touch hot surfaces before it cools down.
•Only authorized service personnel are allowed to install the inverter or
perform servicing and maintenance
•All powers, both AC and DC, should be disconnected from inverter
before attempting any maintenance or cleaning or working on any
3
circuits connected to inverter.
•The Inverter has a transformerless design on PV side. Either positive or
negative terminals of PV panels should not be grounded.
•The frames of PV panels should be grounded for safety reasons.
•Do not open inverter cover or change any components without
authorization, otherwise the warranty commitment for the inverter will be
invalid.
•Appropriate methods must be adopted to protect inverter from
electrostatic discharge, any damage caused by ESD is not warranted by
the manufacturer.
4
3. Scope of Delivery
A
B
C
D
E
F
1 2
3 4
5 6
7 8
G
H
I
J
K
L
M
5
Item
QTY
Designation
A
1
Inverter
B
1
Wall Mounting Bracket
C
1
EPS Connector (Amphenol or Wieland)
D
1
Grid Connector (Phoenix or Wieland)
E
2 or 4
PV Connectors (Amphenol HC4 or Multi-Contact
MC4)
F
1
WiFi Stick
G
1
Smart Meter
H
3
Terminal Resistor (240 Ohm, 120Ohm, 1kOhm)
I
1
Smart Meter Cable
J
1
Water-proof RJ45 Connector for DRM port
K
4
Screws for Fixing Mounting Bracket
L
1
Manual
M
2
RJ45 Connectors and Communication Cable
Extender
6
4. Product Description
Thank you for choosing a LIVOLTEK hybrid solar inverter. Features of the
LIVOLTEK inverter are ahead of the field and should be understood prior
to install.
4.1 View of the Inverter
Figure 1. View of the Hyper Series Hybrid Inverter
Position
Designation
A
LEDs
The LEDs indicate the operating status of the inverter
and SOC of the battery connected.
B
Graphical Display
C
Label
B
A
C
7
Symbols on the Type Label
Symbol
Explanation
CE Mark
Caution, Risk of Danger
Caution, Risk of Electric Shock
Caution, Hot Surface.
Refer to the Operating Manual
5min
Danger, Risk of Electric Shock due to Stored
Energy. Cut off all power and wait at least 5
minutes before any work is carried out on the
inverter.
G83 G59
G83 or G59 Mark for UK.
RCM Mark for Australia and New Zealand.
WEEE Mark. This inverter should not be disposed
as ordinary waste.
Ce manuel convient aux modèles suivants
5
Table des matières
Autres manuels LIVOLTEK Onduleur
LIVOLTEK
LIVOLTEK Hyper 3000 Manuel utilisateur
LIVOLTEK
LIVOLTEK GT1-1K6S1 Manuel utilisateur
LIVOLTEK
LIVOLTEK GT3-50K Manuel utilisateur
LIVOLTEK
LIVOLTEK GT1-3K-S Manuel utilisateur
LIVOLTEK
LIVOLTEK GT3-17K-D Manuel utilisateur
LIVOLTEK
LIVOLTEK Hyper 3-5kW Manuel utilisateur
LIVOLTEK
LIVOLTEK GT1 Series Manuel utilisateur
