LIVARNO LUX 277939 Caractéristiques techniques

HALOGEN CEILING LIGHT

IAN 277939

HALOGÉNOVÉ STROPNÉ SVIETIDLO

Pokyny pre montáž, obsluhu a bezpečnostné pokyny

HALOGEN-DECKENLEUCHTE

Montage-, Bedienungs- und Sicherheitshinweise

HALOGENOVÉ STROPNÍ SVÍTIDLO

Pokyny k montáži, obsluze a bezpečnostní pokyny

HALOGEN CEILING LIGHT

Assembly, operating and safety instructions

HALOGÉN MENNYEZETI LÁMPA

Szerelési, használati és biztonsági tudnivalók

GB Assembly, operating and safety instructions Page 5

HU Szerelési, használati és biztonsági tudnivalók Oldal 11

CZ Pokyny k montáži, obsluze a bezpečnostní pokyny Strana 17

SK Pokyny pre montáž, obsluhu a bezpečnostné pokyny Strana 23

DE/AT/CH Montage-, Bedienungs- und Sicherheitshinweise Seite 29

Before reading, unfold both pages containing illustrations and familiarise yourself with all functions of the

device.

Olvasás előtt kattintson az ábrákat tartalmazó mindkét oldalra és végezetül ismerje meg a készülék minde-

gyik funkcióját.

Před čtením si odklopte obě dvě strany s obrázky a potom se seznamte se všemi funkcemi přístroje.

Pred čítaním si odklopte obidve strany s obrázkami a potom sa oboznámte so všetkými funkciami prístroja.

Klappen Sie vor dem Lesen die beiden Seiten mit den Abbildungen aus und machen Sie sich anschließend

mit allen Funktionen des Gerätes vertraut.

ca./approx.

72 mm

ca./approx.

270 mm

ca./approx.

290 mm

1 2

14107102L

12 11 10 9 8

14119502L

5GB

Table of contents

List of pictograms used........................................................................................................Page 6

Introduction...................................................................................................................................Page 6

Intended use........................................................................................................................................Page 6

Scope of delivery................................................................................................................................Page 6

Parts description..................................................................................................................................Page 7

Technical Data ....................................................................................................................................Page 7

Safety.................................................................................................................................................Page 7

Safety notices......................................................................................................................................Page 7

Preparation...................................................................................................................................Page 8

Required tools and material ...............................................................................................................Page 8

Prior to installation.................................................................................................................Page 8

Start-up .............................................................................................................................................Page 8

Mounting the light...............................................................................................................................Page 8

Replacing lamps..................................................................................................................................Page 9

Maintenance and Cleaning..............................................................................................Page 9

Disposal............................................................................................................................................Page 9

Warranty and Service..........................................................................................................Page 10

Warranty Declaration.........................................................................................................................Page 10

Service address...................................................................................................................................Page 10

Declaration of Conformity..................................................................................................................Page 10

Manufacturer.......................................................................................................................................Page 10

6 GB

Introduction Introduction/Safety

Halogen ceiling light

Introduction

Congratulations on your new product.

You have selected a high quality prod-

uct. Please be sure to carefully read the

complete operating instructions. Fold out the page

with the illustrations. These instructions are part of

the product and contain important information on

setup and handling. Always follow all safety instruc-

tions. Before using this product for the ﬁrst time verify

the correct voltage and that all parts are properly

installed. Should you have any questions or you

are unsure about operating the product, please

contact the dealer or service centre. Please keep

these instructions in a safe place and pass them on

third parties as applicable.

Intended use

This light is only suitable for indoor use

in dry and enclosed spaces. The light

can be fastened to any normally inﬂam-

mable surface. This product is intended for private

household use only.

Scope of delivery

Check immediately after unpacking that the parts

are complete and that the product is in proper

condition.

Item no.: 14107102L

1 Halogen ceiling light 4 ﬂame

4 Halogen lamps G9, 28W

1 Glass plate

2 Washers (metal)

4 Washers (rubber)

2 Box nuts

List of pictograms used

Please read the operating instructions! Caution! Risk of electric shock!

This light is only suitable for indoor

use in dry and enclosed spaces. Caution - Hot surfaces!

Watt (eﬀective power) 0.5 m

RISK OF FIRE! Install the light

at least 0.5m from the items to

be illuminated.

Hertz (mains frequency) Do not use cold light lamps

with reﬂectors

Volt (AC) Only use halogen light bulbs

with a cover plate or low pres-

sure technology.

Earth conductor For your safety

Observe warnings and safety

notices!

Dispose of the packaging and

product in an environmental-

ly-friendly manner!

7GB

Introduction Introduction/Safety

2 Screws (mounting angle)

2 Protective tubes

2 Wall plugs

1 Set of assembly instructions and instructions for use

Item no.: 14119502L

1 Halogen ceiling light 4-arm

4 Halogen light bulb, G9, 28W

1 Glass plate

2 Spacers

2 Washers (rubber, small)

2 Washers (rubber, large)

2 Box nuts

2 Protective tubes

2 Screws

2 Wall plugs

1 Set of assembly instructions and instructions for use

Parts description

1Mounting bracket

2Wall plug

3Locating screws (connection housing)

4Screws (mounting bracket)

5Terminal block

6Mains connection cable (external)

7Protective tube

8Connection housing

9Spacer

10 Washer (rubber)

11 Glass plate

12 Washer (rubber)

13 Box nut

14 Light bulb

15 Washer (metal)

Technical Data

Item no.: 14107102L/14119502L

Operating voltage: 230–240V∼, 50Hz

Lamp: halogen lamp G9, 28W

Rated power: 4 x 28W

Protection class: I

Protection type: IP20

Safety

Safety notices

Damage due to failure to comply with these operat-

ing instructions will invalidate the guarantee! We

assume no liability for consequential damage! We

assume no liability for material damage or personal

injury due to improper handling or failure to comply

with the safety instructions!

Avoid the risk of fatal injury

from electric shock

Ensure that a qualiﬁed electrician, or a person

trained to carry out electrical installations,

performs the electrical installation.

Always check the light, power supply, and

mains cable for damage before plugging it in.

Never use the light if it shows any signs of

damage.

A damaged mains cable indi-

cates a life-threatening danger due to electric

shock. In the event of damage, repairs or other

problems with the light please contact the ser-

vice centre or a qualiﬁed electrician.

Prior to installation, remove the fuse or switch

oﬀ the circuit breaker (0 setting) in the fuse box.

Prior to installation verify the mains voltage on

site corresponds with the operating voltage

required for the light (see ″Technical Data″).

Ensure that the light does not come into contact

with water or other liquids under any circum-

stances.

Never open any of the components of the elec-

trical equipment or insert any objects into the

same components. This will pose a risk of fatal

injury from electric shock.

Do not install the light on a wet or conductive

substrate!

Prevent fire and

injury hazards

RISK OF INJURY! Check each lamp and

lamp glass for damage immediately after un-

packing.

8 GB

Start-up/Maintenance and Cleaning/DisposalSafety/Preparation/Prior to installation/Start-up

Do not mount the light with defective lamps

and/or lamp lenses. In this case contact the

service centre for a replacement.

CAUTION! RISK OF BURNS

DUE TO HOT SURFACES! Ensure

that the luminaire has been switched

oﬀ and

has cooled before touching it, to avo

burn injuries. Lamps develop a lot of heat in the

area of the lamp head.

Allow the lamp to cool oﬀ completely.

Replace defective bulbs with new ones immedi-

ately. Before changing bulbs, always ﬁrst remove

the fuse or switch oﬀ the circuit breaker.

0.5 m

FIRE HAZARD! Fit the light so that

it is at least 0.5m away from the

material to be illuminated. Excessive

heat can result in a ﬁre.

Do not leave the light or packaging material

lying unattended. Plastic ﬁlm or bags, plastic

parts, etc. can be dangerous for children to

play with.

J Do not use cold light lamps with

reﬂector.

Only use halogen light bulbs with

cover glass or low-pressure

technology.

Safe working

Only use the light bulbs speciﬁed in chapter

″Technical Data″.

Mount the light so that it is protected from

moisture and dirt.

Carefully prepare for assembly and allow your-

self adequate time. Organise all parts and any

necessary additional tools or materials before

starting so they are easy to reach.

Always be attentive! Always pay attention to

what you are doing and use common sense.

Never install the light if you are having diﬃculty

concentrating or do not feel well.

Preparation

Required tools and material

The tools and materials speciﬁed are not included.

This information and these values are non-binding

and are only provided as a reference. The nature

of the material is determined by the individual local

conditions.

- Pencil/making tool

- Voltage tester

- Screwdriver

- Electric drill

- Bit (ø approx. 0.6cm)

- Side cutting pliers

- Ladder

Prior to installation

Important: The electrical connection must be

established by a qualiﬁed electrician or a person

trained to perform electrical installations. This per-

son must be familiar with the properties of the light

and the connection regulations.

Familiarise yourself with all the instructions and

diagrams in this manual, as well as with the light

itself, before you install it.

Before installation ensure that the circuit, to which

the light will be connected, is not energised. To

do so, remove the fuse or switch oﬀ the circuit

breaker in the fuse box (0 position).

Use the voltage tester to verify the de-energised

status.

Start-up

Mounting the light

Remove the locating screws 3visible at the side

of the connection housing 8and remove the

mounting bracket 1at the back.

Unfasten the acorn nut 13 from the spacer 9.

Remove the washer (rubber) 12 .

9GB

Start-up/Maintenance and Cleaning/Disposal

Place the glass plate 11 onto the spacer 9,

and then secure using the washer (rubber) 12

and the acorn nut 13 .

Use the slotted holes in the mounting bracket 1

intended for the screws to mark the drill holes.

Now drill the ﬁxing holes (approx. 6mm, depth

approx. 40mm). Ensure that you do not damage

the supply line.

Feed the mains connection cable (external) 6

through the protective tubes 7.

Insert the wall plugs 2into the drill holes.

Fasten the mounting bracket 1with the screws

4provided.

Now connect the connection cable for the lamp

to the mains connection cable (external) 6

using the included terminal block 5.

Note: Be sure to correctly connect each of the

individual wires of the mains connection cable

(external) 6: live wire, black or brown = sym-

bol L, neutral wire, blue = symbol N, ground

wire, green-yellow = symbol .

Now use the locating screws 3to connect the

lamps to the mounting bracket 1.

Use a clean, lint-free cloth when inserting the

lamp 14 .

Carefully insert the lamp 14 into the socket.

Check for correct positioning.

Reinsert the fuse or switch on the circuit breaker

in the fuse box (I position).

Your light is now ready to use.

Replacing lamps

RISK OF ELECTRIC SHOCK!

First disconnect the light from the mains when replac-

ing the lamp. To do so, remove the fuse or switch

oﬀ the circuit breaker in the fuse box (position 0).

Allow the lamp to cool oﬀ completely.

Use a clean, lint-free cloth to replace a bulb.

Carefully remove the defective lamp 14 from

the socket.

Now carefully insert the new light bulb 14 into

the socket.

Check for correct positioning.

Reinsert the fuse or switch on the circuit breaker

in the fuse box (I position).

Your light is now ready to use.

Maintenance and Cleaning

RISK OF ELECTRIC SHOCK!

Disconnect the light from the mains circuit before

cleaning. To do so, remove the fuse or switch oﬀ

the circuit breaker in the fuse box (0 position).

RISK OF ELECTRIC SHOCK!

For electrical safety, never clean the light with water

or other liquids, or immerse it in water.

CAUTION! RISK OF BURNS DUE TO

HOT SURFACES! Allow the light to cool com-

pletely.

Do not use solvents, benzene or similar sub-

stances. They could damage the light.

Only use a dry, lint-free cloth for cleaning.

Reinsert the fuse or switch on the circuit breaker

in the fuse box (I position).

Disposal

The package and packaging materials

consist entirely of environmentally friendly

materials. They can be disposed of at

your local recycling facility.

The symbol of the wheelie bin with the line

through it indicates within the European

Union, this product must be disposed of

through separate refuse collection. This applies to

he product and to all components bearing this sym

bol.

Do not dispose of products bearing this symbol in

your normal household waste, but instead they must

be taken for recycling to a collection site for electrical

and electronic appliances. Recycling helps to reduce

the consumption of raw materials and protects the

environment.

Safety/Preparation/Prior to installation/Start-up

10 GB

Warranty and Service

Warranty Declaration

You receive a 36 month warranty on this product,

valid from the date of purchase. The device has been

carefully produced under strict quality control. Within

the warranty period we shall rectify without charge

all material and manufacturing defects. In the event

of a defect arising during the warranty period, please

send the device to the listed Service Centre address,

making reference to the following article number:

14107102L/14119502L.

Wear parts (such as bulbs) and damage caused by

improper handling, non-observance of the operating

instructions or unauthorised interference are excluded

from the warranty. The performance of services under

the warranty does not extend or renew the warranty

period.

Q Service address

Briloner Leuchten GmbH

Im Kissen 2, DE-59929 Brilon, GERMANY

Tel.: +49 (0) 29 61/9712–800

Fax: +49 (0) 29 61/97 12–199

E-Mail: [email protected]

www.briloner.com

IAN 277939

Please have your receipt and the product number

(e.g. IAN 12345) available for all queries as proof

of purchase.

Q Declaration of Conformity

This product fulﬁls the requirements of the applicable

European and national directives. Conformity has

been demonstrated. The relevant declarations and

documents are held by the manufacturer.

Manufacturer

Briloner Leuchten GmbH

Im Kissen 2

DE-59929 Brilon

GERMANY

Tartalomjegyzék

Autres manuels pour 277939

Table des matières

Langues :

Autres manuels LIVARNO LUX Éclairage domestique

LIVARNO LUX

LIVARNO LUX 306525 Caractéristiques techniques

LIVARNO LUX

LIVARNO LUX 8000.006.080 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 3208-100L012015-2 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 14135306L Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 300534 Caractéristiques techniques

LIVARNO LUX

LIVARNO LUX 14100308L Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 14117501L Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 288528 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 288451 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 14107202L Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 7596-010L Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 274111 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX Z31711A Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 14103106L Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 3000.064.080 Caractéristiques techniques

LIVARNO LUX

LIVARNO LUX 113907 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 7424-018L Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 279632 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 91155 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 8000.010.090 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX LED MOOD LIGHT Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 283490 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 287007 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 110534 Manuel utilisateur

Manuels Éclairage domestique populaires d'autres marques

JONATHAN Y

JONATHAN Y JYL5019A Manuel utilisateur

JONATHAN Y

JONATHAN Y JYL6007A Manuel utilisateur

Philips

Philips Ledino 31606/11/16 Manuel utilisateur

Salus

Salus UG600 Manuel utilisateur

Safavieh Lighting

Safavieh Lighting CANDRI TBL4427A Manuel utilisateur

Hunter

Hunter Bullet Spotlight Kit Manuel d'instructions

Philips

Philips Ledino 16811/87/16 Manuel utilisateur

Philips

Philips 405441213 Manuel utilisateur

Philips

Philips Halogen Light Manuel utilisateur

Pentair

Pentair GLOBRITE Manuel utilisateur

Philips

Philips 55592-30-16 Manuel utilisateur

Livoo

Livoo Night light Manuel utilisateur

Schwaiger

Schwaiger NFL45 Manuel utilisateur

FRITZ HANSEN

FRITZ HANSEN AQ01 PLUG-IN Manuel utilisateur

MOOD

MOOD CORSIN JY-16 Manuel utilisateur

Safavieh Lighting

Safavieh Lighting KREMP TBL4409A Manuel utilisateur

JONATHAN Y

JONATHAN Y JYL8019 Manuel utilisateur

XTRASUN

XTRASUN XTDEOKT1 Manuel utilisateur