Listen LS-88 Manuel utilisateur
LS-88 Quick Start Guide
How to Set Up Your ListenIR Portable System
Your Portable ListenIR System Comes
with the Following Products
1
Transmitter & Microphone Set-Up
2
•LT-84 ListenIR Transmitter/Radiator Combo
•Power Supply
• Tripod
• Microphone
• LR-4200-IR iDSP Receivers
• Universal Ear Speakers
• Neck Loop/Lanyards
• 4-Port USB Charger
•USB to Micro-USB Charging cables
• Assistive Listening Compliance Sign
• Portable IR Carrying Case
POWER
POWER
SWITCH
MICROPHONE
INPUT
VOLUME CONTROL
Step One: Remove the LT-84, power supply, tripod
and microphone.
Step Two: Screw the tripod into the bottom of the LT-84.
Step Three: Plug the power supply into the back of the
LT-84.
Step Four: Plug the microphone into the back of the
LT-84.
Step Five: Plug power supply into an outlet. Turn
on power switch.
Step Six: Make sure the microphone is placed
close to the sound source.
Step Seven: Turn the volume all the way up.
PRO TIP:
Make sure that the LT-84 is not concealed
behind walls, curtains, or treated glass, as
Infrared light needs a clear line-of-sight to
the receiver for the best performance.
Listening with the iDSP IR Receiver
3
Charging your iDSP IR Receiver
4
Step One: Plug the Neck
loop/lanyard into both audio
jacks on the iDSP IR receiver.
Step Two:
For Listeners Using Ear Speakers:
Plug the ear speaker into the audio
jack two thirds up the Neck
loop/lanyard, then place the Neck
loop/ lanyard around the listener's
neck, and the speaker on the ear.
For Listeners with Telecoils:
Telecoil users do not need an ear
speaker. Place the Neck loop/lanyard
around the listener's neck; it will
interact with the listener's telecoil.
Step Three: Turn on by holding
down the power button for one
second; turn off by holding down
for three seconds.
Step Four: Adjust volume with
the volume buttons on the front
of the receiver.
Option One: Use the 4-Port USB Charger and USB
to Micro-USB charging cables. Insert the charging
cables into the receiver and charger, then plug into
an outlet to charge.
POWER BUTTON
VOLUME
CONTROLS
PRO TIP:
Make sure your iDSP IR
Receiver is worn on the
outside of clothing for the
best performance.
PRO TIP:
It is best to let the receivers charge fully
between each use.
There are two ways to charge your iDSP IR Receiver.
Option Two: Use the USB to Micro-USB charging
cables with your PC. Insert the charging cables into the
receiver, then plug into the USB on your computer.
LISTEN TECHNOLOGIES 14912 Heritage Crest Way, Bluffdale, Utah 84065-4818 USA
Phone: +1.801.233.8992 Toll-Free: 1.800.330.0891 www.listentech.com
Copyright © 1998 - 2022 Listen Technologies Corporation. All rights reserved. 20221017.
Table des matières
Autres manuels Listen Système de conférence
Manuels Système de conférence populaires d'autres marques
Kramer
Kramer VIA GO Manuel utilisateur
AVT
AVT MAGIC AC1 Go Manuel utilisateur
ProSoft Technology
ProSoft Technology AN-X4-AB-DHRIO Manuel utilisateur
Sony
Sony PCS-I150 Manuel utilisateur
Middle Atlantic Products
Middle Atlantic Products VTC Series Manuel utilisateur
Prentke Romich Company
Prentke Romich Company Vanguard Plus Mode d’emploi
