Linux Skypecam series Manuel utilisateur
Read and understand thoroughly this safety awareness & instruction before using and keep it
for future reference,the device is called Skypecam in this text.
Safety Precaution:
Do not place heavy object on the Skypecam.
Do not let any solid or liquid fall into or infiltrate the Skypecam.
Do not disassemble, repair or replace the parts of the Skypecam by yourself.
Using environment:
Please place and use the Skypecam between 0℃and 40 ℃.Avoid direct sunlight or stay away
from heat.
Do not install the Skypecam in damp environment.
Do not expose the Skypecam in smoky or dusty environment.
Do not drop the Skypecam and avoid strongly collision.
Please insure the Skypecam level installation in a stable workplace and prevent the Skypecam to be
dropped
Please install in well-ventilated place. Do not block the vents.
The Skypecam only can be used within the range of rated input and output.
1
1ProductIntroduction
1.1 Product Overview
The Skypecam series is a type of excellent intelligent home product specially designed for
digital field. It introduces embedded LINUX operating system which is more stable. It introduces
the technology of standard H.264 mp video compression format and G.711A audio compression
format which insure the high-quality image, low-bit rate and single-frame playing. It introduces
Cloudlink P2P network transmission technology which achieves strong network data transmission
ability and remote control ability. It introduces wireless learning codes technology and wireless
detector to construct a strong alarm system.
1.2 Main functions
Video call
It can realize the video call not only between two Skypecam, but also among smart phone,
tablet computer and Skypecam.
Record function
After inserting U disk or Micro SD to Skypecam, it can realize simultaneous storage and
recording of audio and video, and different recording mode such as manual recording, alarm
recording, timing recording can be selected.
You can search video files intelligent on the device and playback video on the screen directly.
Remote monitor
It can achieve remote monitor by using mobileAPP to dial 3C number.
Wireless alarm
It introduces wireless learning code and wireless detector to construct alarm system, and also
email alarm function is supported.
3
Network Phone Camera User Manual
2 Open-package inspection and cable connection
2.1 Open package check
First, please check whether there is any visible damage to the package appearance. The
protective material used for the package of the Skypecam can sustain most accidental clashes during
the transportation.
Then, please open the box and get rid of the plastic protective coating. Check whether there is
any visible damage to the Skypecam appearance.
2.2 The front panel and rear panel
The key function specification in the front panel and the interface specification in the rear panel
are described in details in the manual.
Please check carefully the product model in the bottom plate or in the rear panel film whether
is accordant with the model you ordered.
The label in the bottom plate or in the real panel is very important for after-sales service, please
protect it carefully.
Please provide the product model and serial number in
the label before you contact our after-sales.
4
Network Phone Camera User Manual
2.3 The front and rear panel key function
Piolot lamp:From left to right are： (Network, Defence,Recording,
Alarm)
5
Network Phone Camera User Manual
The front button operation function
Num Button
name Mark Function
1 Number button 0-9 Input the number key during user input state
Short press to decrease the volume during video call or
playing state
Short press to delete text during edit state
2 */.键
Long press to record/stop recording during manual record
mode
Short press to increase the volume during video call or
playing state
Short press to switch input method during edit state
3 Ctrl shift/
defense
Long press to do defense/cancel operation
Short press to dial video call during standby state
4 Dial/preview Long press to enter real-time preview during standby
mode
Hang up call during video call
5 Hang up/Exit Back to above level menu and exit current state
Remove the cursor by up and down buttons when the
main menu or submenu is popped
Add or decrease number during edit state
Change the setting in the menu
Play last or next video file by up and down buttons
during the playback state
Move the cursor by left and right buttons when the main
menu or submenu is popped
6 Direction button
Play in the multi-low or multi-fast video during the
playback state
7 Main
Confirm
6
Network Phone Camera User Manual
menu/confirm
key Enter main menu
2.4 The rear panel
○
1 Network interface ○
2 WIFI ant interface ○
3 Learning code indicator ○
4 Learning button
○
5 Power switch ○
6 Power interface ○
7 USB interface ○
8 3C smart card interface ○
9Micro
SD card interface ○
10 Earphone interface
7
Network Phone Camera User Manual
3 Basic operation
3.1 Turn on
Plug the power supply and turn on the power supply switch to “ON”, the Skypecam enters the
system.
Suggest using the stable input voltage and power input ripple with less interference to make
sure the Skypecam power supply.
Suggest using the UPS to protect the power supply under allowable conditions
3.2 Turn off
Check and confirm the recording is stopped before turn off the Skypecam, turn off the power
supply switch to “OFF”, or pull the rear panel power switch that can switch power.
Auto resume after power failure
If the Skypecam is shut down abnormally, it can automatically backup video and resume
previous working status after power failure.
Insert the U disk or Micro SD card
Please make sure the Skypecam is not in recording state before inserting the U disk or Micro
SD card, otherwise information will loss or storage equipment will be damaged.
Replace the battery
Please save the setting information and turn off the power supply switch before replacing the
battery. The Skypecam uses button battery. Please check the system time regularly, if the time is not
correct, you need replace the battery. Suggest replacing the battery every year and using the same
type battery.
Note: The setting information must be saved before replacing the battery otherwise information will
lose.
3.3 Standby state
Turn on the Skypecam and enter standby state, the system standby is shown as below:
8
Network Phone Camera User Manual
Picture 3.1 Login interface
Icons meaning under standby state:
1 USB detection icon 2 Micro SD detection icon
3 Motion detection icon 4 3C smart card detection icon
5 WIFI connection icon 6 Internet connection icon
7
Sever abnormal
connection icon
9
Table des matières
