Linksys WAP4400N Manuel d'utilisation

PRODUCT DATA

BUSINESS SERIES

Wireless-N

Access Point with Power

Over Ethernet

Model: WAP4400N

High-Speed Wireless Access for Existing

Networks!

With the growth in high bandwidth applications, such as storage and video in the

work place, network performance is essential. Wireless technology is no longer

lagging behind wired performance.The introduction of the Linksys Business Series

WAP4400N Wireless-N Access Point answers the growing business’need for access,

speed, and security.

The Access Point uses the very latest wireless networking technology,Wireless-N (draft

802.11n). By overlaying the signals of multiple radios,Wireless-N’s “Multiple In,

Multiple Out” (MIMO) technology multiplies the effective data rate.Unlike ordinary

wireless networking technologies that are confused by signal reﬂections, MIMO actually

uses these reﬂections to increase the range and reduce“dead spots” in the wireless

coverage area.

The Linksys Wireless-N Access Point lets you connect Wireless-N (802.11n),Wireless-G

(802.11g) or Wireless-B (802.11b) devices to your wired network so you can add PCs to the

network with no cabling hassle. Power over Ethernet (PoE) support makes the Access Point

easy to install -- you can mount the Access Point anywhere, even without ready access to a

power plug. With appropriate PoE support at the other end, you only need to run one cable to

the Access Point to deliver both data and power. Of course, you can also use the included AC

adapter if your installation point has power available nearby.

Moreover, the integrated Quality of Service (QoS) features provide consistent voice and video

quality on both the wired and wireless networks, enabling the deployment of business quality

VoIP and video applications.

To protect your data and privacy, the Linksys Wireless-N Access Point supports both Wired

Equivalent Privacy (WEP) and the industrial-strength wireless security of Wi-Fi Protected Access™

(WPA), encoding all your wireless transmissions with powerful encryption. With the MAC address

ﬁlter with advanced logging feature, you both control and stay apprised of who accesses your

wireless network. Conﬁguration is a snap with the web browser-based conﬁguration utility.

The Linksys Wireless-N Access Point with Power Over Ethernet is the best way to add wireless access

to your existing business network.

Complies with IEEE draft

802.11n standards while

at the same time being

backwards compatible with

802.11b and g devices

Standards-based POE (IEEE

802.3af) or External DC

power

MIMO technology uses

multiple radios to create a

robust signal that travels

farther and reduces dead

spots

Support for WMM provides

improved QoS over

wireless connections for

better video and voice

performance

WAP4400N

PRODUCT DATA

BUSINESS SERIES

Features

Draft 802.11n wireless

networking delivers greater

throughput and extended

range, maximizing the

number of wireless clients

per access point for your

small business

Full backwards compatibility

for 802.11b and 802.11g

Easy installation and

conﬁguration web interface

Supports WEP,WPA-PSK,

WPA2-PSK, WPA2-ENT,

WPA-ENT authentication

(802.11i ready)

Adjustable dipole antennas

with MIMO 2x3 diversity

Gigabit Ethernet LAN

interface

Supports Power over

Ethernet (PoE) or external

DC power

Supports SNMP and intuitive

web-based interface

WMM wireless QoS

support - upgradeable to

802.11e

•

Access Point with Power Over Ethernet

Speciﬁcations

Model WAP4400N

Standards Draft IEEE802.11n, IEEE802.11g, IEEE802.11b, IEEE802.3, IEEE802.3u,

IEEE802.3af (Power over Ethernet), 802.1x (Security Authentication),

802.11i - Ready (Security WPA2), 802.11e - Ready (Wireless QoS)

Ports Ethernet, Power

Buttons Reset

Cabling Type UTP CAT 5

LEDs Power, Ethernet, Wireless, POE

Operating System Linux

Setup/Conﬁg

WebUI Built in Web UI for easy browser-based conﬁguration (HTTP/HTTPS)

Management

SNMP Version SNMP Version 1, 2c, 3

Event Logging Event Logging

Remote Syslog

Web F/W upgrade Firmware upgradeable through web-browser

Diags: Flash, etc. Diags: Flash, RAM, LAN, WLAN

DHCP DHCP Client

Operating Modes

Access Point Access Point Mode

Wireless

Spec/Modulation Radio and Modulation Type: 802.11b/DSSS, 11g/OFDM, 11n/OFDM

Channels Operating Channels: 11 North America,

13 Most of Europe (ETSI and Japan)

# of Internal Ant. None

# of External Ant. 3 (Omni-Directional)

Transmit Power Transmit Power (Adjustable) at Normal Temp Range:

11b - 16 dBm at 1TX, 19 dBm at 2TX; 11g - 13 dBm at 1TX, 16

dBm at 2TX; 11n - 13 dBm at 1TX, 16 dBm at 2TX

Antenna Gain in dBi 2

Receiver Sensitivity 11.n: 300Mbps at -69dbM, 11.g: 54Mbps at -73dBm,

11.b: 11Mbps at -88dBM

Security

WEP/WPA/WPA2 WEP 64bit/128bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT

Access Control Wireless connection control: MAC-based

SSID Broadcast SSID Broadcast enable/disable

802.1X IEEE 802.1X support

Quality of Service

QoS 4 queues

WMM Wireless priority

General

Load Balancing

New AP detection (used with WPC4400N)

New client detection (used with WPC4400N)

Auto-channel selection

PRODUCT DATA

BUSINESS SERIES

Linksys

A Division of Cisco Systems, Inc.

121 Theory

Irvine, CA 92617 USA

E-mail: [email protected]

[email protected]

Web: http://www.linksys.com

Linksys products are available in more

than 50 countries, supported by

12 Linksys Regional Ofﬁces throughout

the world.For a complete list of local

Linksys Sales and Technical Support

contacts, visit our Worldwide Web Site

at www.linksys.com.

Check the product package and contents for speciﬁc features supported.Speciﬁcations are subject to change without notice. Linksys is a registered trademark or

product names are trademarks or registered trademarks of their respective holders.

Model: WAP4400N

Environmental

Dimensions 7.80” x 5.16” x 7.80”

W x H x D (198 x 131 x 198 mm)

Unit Weight 0.84 lb (38 g)

Power 12V 1A DC input, and IEEE802.3af Compliant PoE

Certiﬁcation FCC, CE, IC

Operating Temperature 32 to 104ºF (0 to 40ºC)

Storage Temperature -20 to 70ºC

Operating Humidity 10% to 85% non-condensing

Storage Humidity 5% to 90% non-condensing

Package Contents

Wireless-N Access Point with PoE

User Guide on CD-ROM

Ethernet Network Cable

Power Adapter

Product Stands

Registration Card

Minimum Requirements

802.11b, 802.11g, 802.11n Wireless Adapter With TCP/IP Protocol Installed Per PC

Switch/Router with Power Over Ethernet (PoE) Support Or PoE Injector when used with POE

Web-Based Conﬁguration Java-Enabled Web Browser

Warranty

3 Years

•

WAP4400N-DS-70108NC-BW

Autres manuels pour WAP4400N

Table des matières

Autres manuels Linksys Point d'accès sans fil

Linksys

Linksys WAP2000 Manuel utilisateur

Linksys

Linksys LAPAC1750 Manuel utilisateur

Linksys

Linksys WAP54G - Wireless-G Access Point Manuel utilisateur

Linksys

Linksys LAPN300 Manuel utilisateur

Linksys

Linksys EtherFast Instant Broadband BEFW11S4 Manuel utilisateur

Linksys

Linksys WAP11 - Instant Wireless Network Access... Instructions d'utilisation d'origine

Linksys

Linksys EtherFast Instant Broadband BEFW11S4 Mode d’emploi

Linksys

Linksys WRT610N V1 Manuel utilisateur

Linksys

Linksys WPG54G Instructions d'utilisation d'origine

Linksys

Linksys LAPAC1750 Manuel utilisateur

Linksys

Linksys WAP55AG - Wireless A+G Access Point Manuel utilisateur

Linksys

Linksys WAP54G - Wireless-G Access Point Manuel utilisateur

Linksys

Linksys LAPN600 Manuel utilisateur

Linksys

Linksys WAP54GP - Wireless-G Access Point Manuel utilisateur

Linksys

Linksys LAPAC1750PRO Manuel utilisateur

Linksys

Linksys WAP51AB - Instant Wireless - Access Point Instructions d'utilisation d'origine

Linksys

Linksys SPA400 Guide de configuration rapide

Linksys

Linksys WAP54G - Wireless-G Access Point Instructions d'utilisation d'origine

Linksys

Linksys WAP55AG - Wireless A+G Access Point Manuel utilisateur

Linksys

Linksys WAP11 v.2.6 Manuel utilisateur

Linksys

Linksys WAP54GX Manuel d'utilisation

Linksys

Linksys WAP54GP - Wireless-G Access Point Manuel utilisateur

Linksys

Linksys WAP51AB - Instant Wireless - Access Point Manuel utilisateur

Linksys

Linksys WAP4400N Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur