Linksys SPA400 Guide de configuration rapide

Linksys SPA400

Trixbox Integration Guide

Access Point – Connecting You & Your Customers.

Contact : [email protected]

Overview:

The Linksys SPA400 is a 4 Line FXO gateway capable of connecting 4

PSTN lines to your asterisk system to make and receive calls. This

guide is a step by step on how to configure Trixbox to utilize the

features of the SPA400. Limitations:

* The voicemail function of the SPA400 cannot be used.

* You cannot select which line of the SPA400 to use. They are

treated as a single group of 1-4 lines. The SPA400 will know

which lines are available by the line voltage when plugged in.

Configure the SPA400:

Step 1 – Obtain the IP address if the SPA400

Option 1(Easiest): You will need to check your DHCP server to see

what IP address has been allocated to the SPA400 (Will usually be in

the Status area of your Modem/Router).

Option 2(Harder): If you only have a few devices on your network

you can use angry IP scanner (http://www.angryziber.com) which will

search your network for devices. You should be able to work out the

SPA400 address. Try searching for port 5060 also to help identify.

Option 3: You can download the SPA9000 setup utility from

http://www.linksys.com it will scan the network for SPA400s and show

the IP address.

Note the IP Address: ___________________________________

Step 2 – Access the SPA400

In your favourite web browser type the IP address of the SPA400, it

should ask for a username and password.

The default username is Admin (Note capital A)

The default password is blank

Step 3 – Set the SPA400 to a Fixed IP address

Asterisk needs to access your SPA400, so it needs to be set to a

fixed ip address. To do this: -

Under Setup -> Basic Setup

•Select Fixed IP address and enter a valid fixed IP address for

your network.

•Be sure to enter a DNS server, if you do not know enter the

Telstra DNS server 139.130.4.5 – You can leave the secondary

blank

•Set your time zone.

•Click Save Settings

•Restart System

Sample Config – Use Address Valid For Your Network

Check with the network administrator if unsure.

Note the IP address in the Notes Section.

Step 4 – Setup the SPA400 Voice Configuration.

Open the SPA400 in your web browser using the new IP address.

Select Setup->SPA9000 Interface.

•Enter SPA400 in the User ID:

•Leave SPA9000 on discover automatically

•No other changes should need to be made

•Click Save Settings (You Do Not Need To Restart)

Screenshot of Setup -> SPA9000 Interface

Select Setup -> Voice

For Australia you need to change:-

•Impedance : 220 Ohms + (820 Ohms || 120nF)

•On-Hook speed : 26ms

Step 5 – Configure Trixbox Trunk.

Open your FreePBX interface: http://trixbox.ip/admin/

Select Trunks -> Add SIP trunk

Complete the form with the details below:

----------------------------------------------------------------------

Outbound Caller ID: Blank

Never Override CallerID : Unticked

Maximum Channels: (the number of pstn lines plugged into the

SPA400)

Dial Rules: Leave Empty

Outbound Dial Prefix: Empty

Trunk Name: SPA400 (Can be anything you wish)

Peer Details: allow=ulaw

canreinvite=no

context=from-trunk

dtmfmode=rfc2833

host=x.x.x.x

insecure=very

type=friend

user=SPA400

USER Context: Leave Blank

USER Details: Blank (Delete the default information)

SPA400@x.x.x.x/SPA400

-----------------------------------------------------------------------

Note : x.x.x.x should be where you enter the IP address of the

SPA400

Click Submit Changes.

Step 6 – Configure Outbound Route.

You can now treat the SPA400 like any other trunk. To add an

outbound router (eg, dial 9 to dial out the SPA400)

Outbound Routes -> Add Route

Route Name: SPA400PSTN (this can be anything)

Route Password: Blank

Emergency Dialing: Unticked

Intra Company Route: Unticked

Dial Patterns: 9|.

Trunk Sequence: SPA400

Click Submit Changes

Step 7 – Configure Inbound Route.

This will setup an inbound route for people who call the PSTN lines

plugged into the SPA400.

Setup -> Inbound Routes -> Add Incoming Route

DID Number: SPA400 (case sensitive)

Caller ID Number: Blank

Zaptel Channel: Blank

Fax Handling

Leave as is

Select the Destination

Click Submit

Click the Red “Apply Configuration Changes” to reload asterisk

Complete:

You should now be able to make and receive calls via your SPA400.

Email [email protected] for further support if required.

Congratulations

Notes:

SPA400 IP Address: _____________________________

SPA400 Username: ______________________________

SPA400 Password: ______________________________

Number of Lines: _____

Installed By: _______________________________

Date: ______________________________

Autres manuels pour SPA400

Table des matières

Autres manuels Linksys Point d'accès sans fil

Linksys

Linksys WAP11 - Instant Wireless Network Access... Instructions d'utilisation d'origine

Linksys

Linksys WAP54G - Wireless-G Access Point Manuel utilisateur

Linksys

Linksys WAP4400N Manuel d'utilisation

Linksys

Linksys WAP2000 Manuel utilisateur

Linksys

Linksys WAP54GPE - Wireless-G Exterior Access Point Manuel utilisateur

Linksys

Linksys WAP11 - Instant Wireless Network Access... Manuel utilisateur

Linksys

Linksys WAP54GP - Wireless-G Access Point Manuel utilisateur

Linksys

Linksys WPG54G Manuel utilisateur

Linksys

Linksys WAP54G - Wireless-G Access Point Instructions d'utilisation d'origine

Linksys

Linksys WAP4410N Manuel utilisateur

Linksys

Linksys AC1200 Manuel utilisateur

Linksys

Linksys WAP200 Manuel utilisateur

Linksys

Linksys WAP300N Manuel utilisateur

Linksys

Linksys WAP4400N Manuel utilisateur

Linksys

Linksys WAP11 v2.2 Manuel utilisateur

Linksys

Linksys WAP55AG - Wireless A+G Access Point Manuel utilisateur

Linksys

Linksys LAPAC1750 Manuel utilisateur

Linksys

Linksys EtherFast Instant Broadband BEFW11S4 Manuel utilisateur

Linksys

Linksys WAP54G - Wireless-G Access Point Manuel utilisateur

Linksys

Linksys WAP11 - Instant Wireless Network Access... Manuel utilisateur

Linksys

Linksys WAP54GP - Wireless-G Access Point Manuel utilisateur

Linksys

Linksys WAP2000 Manuel d'utilisation

Linksys

Linksys WAP54G - Wireless-G Access Point Manuel utilisateur

Linksys

Linksys Instant Wireles Series Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur