Linksys RE6300 Manuel utilisateur

User

Gui

6300/RE6400

Introduction

This User Guide can help you connect the extender to your network and solve common setup

issues. You can find more help from our award-winning, 24/7 customer support at

Linksys.com/support.

Contents

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

How to install the range extender................ 2

How to access the browser-based utility .......... 5

8VLQJUDQJHH[WHQGHUVHWWLQJV«««««;

Using Wi-Fi Protected Setup..................... 7

How to use Site Survey.......................... 9

Cross-Band

AC Power Pass-Through

Wireless Music Playback

Troubleshooting................................ 10

Specifications.................................. 13

Overview

Front

RE6300

RE6400

The light on the front of the range extender gives you information about power, updating and

signal strength.

Power Light

Status/ description

Blinking Green

xBooting up

xResetting to factory defaults

xUpgrading firmware

Solid Green

xReady to use

Solid Orange

xWeak connection with the router

Fix: Unplug the extender, and move

it closer to the router

Blinking Orange

xNot connected to the router

xOther error

Fix: Unplug the extender, plug it back

in, wait two seconds, reconnect to your

network

Side

Power Switch European versions only.

Wi-Fi Protected Setup Button and LED Use Wi-Fi Protected Setup to automatically and

securely add compatible wireless devices to your network. Refer to Using Wi-Fi Protected Setup

on page 7.

Reset Press and hold for about five seconds to reset to factory defaults. You can also restore

the defaXOWVIURPWKH$GPLQLVWUDWLRQ!)DFWRU\'HIDXOWVVFUHHQLQWKHH[WHQGHU¶VEURZVHU-based

utility.

Bottom

Ethernet (blue) Connect wired devices to your wireless network with Ethernet (network) cables.

The green light turns on when an Ethernet device is connected and active on this port. The light

blinks when the extender is sending or receiving data over the Ethernet port.

How to install the range extender

Before setup, unplug or disconnect any range extenders on the network.

1. Plug in the range extender midway between your router and the area without Wi-Fi.

%HVXUH\RXKDYHDWOHDVWRI\RXUURXWHU¶V:L-Fi signal at that point on the device

you will use for setup. The setup software will help you find the best spot if you have

trouble.

2. Wait for a solid light on the cover of the range extender. It could take up to two minutes.

On a computer, phone or tablet, connect to the Wi-)LQHWZRUN³/LQNV\V([WHQGHU6HWXS´

3. ,IVHWXSGRHVQ¶WVWDUWDXWRPDWLFDOO\RSHQDEURZVHUWRhttp://extender.linksys.com.

/LQNV\V¶V6SRWILQGHUWHFKQRORJ\will help you find the right location for your range

extender if you have trouble. You will be guided to place the range extender closer or

farther from your router to improve the signal. If you nailed it with your first placement

you will not see Spot finder screens.

4. During setup you will be asked whether you want the range extender to update itself

automatically. If you allow automatic updates, the range extender will download and install

updates when released by Linksys. Automatic updates will take place overnight so they do not

disrupt your network activity.

You also can decide to manually update your range extender at your convenience.

Post set-up LED behavior mention here as well and in the QSG

TIP

You can also connect the range extender by using Wi-Fi Protected Setup. For more

LQIRUPDWLRQVHH³8VLQJ:L-)L3URWHFWHG6HWXS´RQSDJH

Special Feature - Music Streaming

Wireless Music Playback

Stream music through your AC1200 MAX range extender to connected speakers.

iOS devices:

xConnect iOS device to the same Wi-Fi network as your range extender.

xSwipe up from the bottom of your screen.

xTap on Linksys Range Extender.

Android devices

For Samsung Galaxy

xConnect Galaxy device to the same Wi-Fi network as your range extender.

xSelect Music app

xChoose music file and tap Screen Mirroring icon

xChoose Linksys Range Extender.

Your screen might look different depending on your device model and version of Android.

For other Android devices, stream music with MediaHouse, UPnPlay, Skifita, ArkMC,

BubbleUPnP, Pixel Media, and 2Player 2.0.

Windows

xOpen Windows Media Player

xRight-click on music file and choose Linksys Range Extender.

This list of supported media players is subject to change with the release of new

software or mobile apps.

xWindows users can stream music with Windows Media Player12.

xMac users can stream music with proprietary software or the SofaPlay app..

xAndroid users can stream music with MediaHouse, UPnPlay, Skifita, ArkMC,

BubbleUPnP, Pixel Media, and 2Player 2.0.

xIOS devices including iPhone, iPad or iPod can stream music with proprietary

software or other apps such as, , ArkMC, Smartstor Fusion, , Mconnect, and DK

UPnP/DLNA.

xThe extender supports MP3, FLAC, WAV, WMA and AAC file formats, as long as

those formats are supported by the device and app doing the streaming.

xThe 3.5mm stereo port supports earphones and powered speakers.

How to access the browser-based utility

After setting up WKHH[WHQGHUXVHWKHH[WHQGHU¶VEURZVHU-based utility to change any

settings.

On a computer or device that is connected to your range extender, open any browser

(Internet Explorer, Chrome, Firefox, Safari, etc.), and enter extender.linksys.com in the

address bar.

You will be prompted to enter a user name and password. If you did not change them

during setup, leave the user name blank and HQWHU³DGPLQ´LQWKHSDVVZRUGILHOG,Iyou customized the SSID and password, enter those credentials.

If you are connected to your local network, but not to the range extender, you will need

WRHQWHUWKHUDQJHH[WHQGHU¶V,3DGGUHVVLQ\RXUEURZVHUWRDFFHVVWKHH[WHQGHU¶Vsettings.

TIP

,I\RXDUHXQDEOHWRDFFHVVWKHUDQJHH[WHQGHU¶VVHWWLQJVGRRQHRIWKHfollowing:

Find the UDQJHH[WHQGHU¶VIP address E\JRLQJWR\RXUURXWHU¶VDGPLQLVWUDWLRQSDJHDQGlooking for the range extender under connected devices.

Windows XP:

1. Enable UPnP:

a) Click Start, Control Panel, Add or Remove Program, then click

Add/Remove Windows Components.

b) Select Network Services, then click Details.

c) Select UPnP User Interface, then click OK.

2. Open Windows Explorer. Click My Network Places on the left panel.

3. Look for the RE6700 icon on the right panel. (You might be required to change the firewall

VHWWLQJVWRDOORZWKHGLVSOD\RIQHWZRUNHGFRPSXWHUV5HIHUWR\RXURSHUDWLQJV\VWHP¶VKHOSfor instructions.)

Windows 8, Windows 7, or Vista:

1. Open Windows Explorer (File Explorer in Windows 8). Click Network. Look for the RE6700

icon on the right panel. (You might be required to change the firewall settings to allow the

GLVSOD\RIQHWZRUNHGFRPSXWHUV5HIHUWR\RXURSHUDWLQJV\VWHP¶VKHOSIRULQVWUXFWLRQV

2. Right-click the RE6700 icon. Click Properties. Click on the address link in Device webpage.

Mac OS X:

1. Open Safari. Be sure that Bonjour is included in the Bookmarks menu and Favorites bar.

a. Go to Safari Preferences > Advanced and be sure each Bonjour box is selected.

2. Find Bonjour in the Bookmarks PHQXRU)DYRULWHVEDUDQGFKRRVH³/LQNV\V5DQJH([WHQGHU´If you have changed your network name and password, choose the network

name and enter the password you created.

Using range extender settings

Click Help RQWKHULJKWVLGHRIWKHVFUHHQIRUDGGLWLRQDOLQIRUPDWLRQRQWKHVFUHHQ¶Voptions.

Changes to settings will not be effective until you click Save at the bottom of the screen.

You also can click Cancel to clear any changes.

Autres manuels pour RE6300

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Linksys Extenseur

Linksys

Linksys DMA2100 - Media Center Extender Manuel utilisateur

Linksys

Linksys WRE54G-RM - Refurb Wireless-G Range Expander Manuel utilisateur

Linksys

Linksys RE1000 Manuel utilisateur

Linksys

Linksys RE6700 Manuel utilisateur

Linksys

Linksys DMA2200 - Media Center Extender Manuel utilisateur

Linksys

Linksys RE6350 Manuel utilisateur

Linksys

Linksys WMCE54AG - Wireless A/G Media Center... Manuel utilisateur

Linksys

Linksys RE7000 Manuel utilisateur

Linksys

Linksys PLW400 Manuel utilisateur

Linksys

Linksys RE6700 Manuel utilisateur

Linksys

Linksys WSB24 Instructions d'utilisation d'origine

Linksys

Linksys WRE54G - Wireless-G Range Expander Repeater Instructions d'utilisation d'origine

Linksys

Linksys RE7000 Manuel utilisateur

Linksys

Linksys RE3000W Manuel utilisateur

Linksys

Linksys RE7310 Manuel utilisateur

Linksys

Linksys WRE54G - Wireless-G Range Expander Repeater Instructions d'utilisation d'origine

Linksys

Linksys RE6500 Manuel utilisateur

Linksys

Linksys RE1000 Manuel utilisateur

Linksys

Linksys WRE54G - Wireless-G Range Expander Repeater Manuel d'utilisation

Linksys

Linksys RE6500 Manuel utilisateur

Linksys

Linksys RE4100W Manuel utilisateur

Linksys

Linksys RE9000 Manuel utilisateur

Linksys

Linksys RE1000 Manuel utilisateur

Linksys

Linksys RE6500 Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur