LINK-MI LM-HD808 Manuel utilisateur

Model No：LM-HD808

Operating Instructions

Thanks for purchasing our product.

Please be sure to read this instruction manual

carefully before using our product.

Introduction

LM-HD808 is an 8-by-8 HDMI matrix. It allows any of the eight Input Channels

(HDMI) to be routed to any of the eight Output Channels (HDMI), no matter the

source is HDCP or not. Users can choose several different ways to control the

matrix: by using infrared, RS232, and LAN and supplied remote control.

LM-HD808 internal EDID library features default EDID configurations, in addition

to native EDID data for any output/display.

LM-HD808 offers solutions for digital entertainment center, HDTV retail and show

site, HDTV, STB, DVD and projector factory, noise, space and security concerns,

data center control, information distribution, conference room presentation, school

and corporate training environments.

HDMI Matrix (Routing Type)

■Product Overview

Dear customer

Thank you for purchasing this product. For optimum performance and safety,

please read these instructions carefully before connecting, operating or adjusting

this product. Please keep this manual for future reference.

■Features

Allows up to eight HDMI audio/video devices to be independently switched to

eight HDMI monitors, HDTV’s, or projectors.

The eight output channels could show the same or different source

simultaneously no matter the source is HDCP or not.

Reading and saving EDID function from displays.

Support high definition resolutions, including:

1080p@60Hz@36 b/pixels, 3D, 1080i, 720p and other standard video

formats.

Each port support both HDMI and DVI inputs.

With extra infrared extension receiver.

Four switching modes: panel buttons, local IR, RS232 and Ethernet.

HDCP compliant

HDMI 1.3 supported.

Notice

Grand being Inc. reserves the right to make changes in the hardware, packaging

and any accompanying documentation without prior written notice.

Warning

To reduce the risk of fire, electric shock or product damage:

1. Do not expose this apparatus

to rain, moisture, dripping or

splashing and that no objects

filled with liquids, such as vases,

shall be placed on the apparatus.

6. Clean this apparatus

only with dry cloth.

2. Do not install or place this unit

in a bookcase, built-in cabinet or

in another confined space.

Ensure the unit is well ventilated.

3. To prevent risk of electric

shock or fire hazard due to

overheating, do not obstruct

the unit’s ventilation openings

with newspapers, tablecloths,

curtains, and similar items.

4. Do not install near any heat

sources such as radiators, heat

registers, stoves, or other

apparatus (including amplifiers)

that produce heat.

5. Do not place sources of naked

flames, such as lighted candles,

on the unit.

7. Unplug this apparatus

during lightning storms or

when unused for long

periods of time.

8. Protect the power cord

from being walked on or

pinched particularly at

plugs.

9. Only use attachments /

accessories specified by

the manufacturer.

10. Refer all servicing to

qualified service

personnel.

■Package Contents

11x Main unit. P/N_ LM-HD808.

21x Remote.

31x IR RX (IR receiver cable).

41x RS232 converter.

512V/DC Power Supply.

6Operating Instructions.

7Mounting ears.

NOTE: PART NUMBER (Abbreviation as P/N).

■Panel Descriptions

1LCD indicator, displays the status of each output port.

2IR receive window.

3OUT1~8 & IN1~8: Press the output source selection button in order to choose

which input port corresponds to the desired output port. First select your output

port form 1~8, then choose the desired input port from ports 1~8.

4ALL: Press this button to set all the outputs to display with the same input. First

press the “ALL” button then press an input number to confirm the selection.

5LOCK: Press this button to lock all the functions and press it again to release

the lock.

1RS232 port.

2LAN port.

3HDMI output port.

4HDMI input port (HDMI or DVI).

5Power: Press this button to turn the system on.

6IR extender: This slot is where you can extend your IR receiver with an IR

extender cable that supports only 38KHz.

7Power input: Plug the 12V DC power supply into the unit and connect the

adapter to an AC wall outlet.

■Connections and Operations

1) Connect the HDMI input source ( such as HD-DVD/ PS3/STB etc.)Into

LM-HD808.

2) Connect HDMI OUT of LM-HD808 to display equipment.

3) Connect the Broadband IR receive cable into LM-HD808 IR RX ports.

4) Power on the input source you want to show. ( Keep the unused input power

off, otherwise it may interfere the normal display).

5) Plug the power cable into LM-HD808.

6) Turn on the power, when the LED panel stops flashing circularly, the

initialization of the matrix are ready.

7) Turn on the displays you want to watch.

8) Use the remote to control the matrix, or using Front Panel, RS232 and LAN

port to control.

2. Control via IR remote.

User can control the HDMI route of the matrix by using the IR remote. There are two group key

pads for sixteen ports. Press the output source selection button in order to choose which input port

corresponds to the desired output port. (For example: Output 8 select Input 7, first press output 8,

then press input 7, LCD display 8-7)

NOTE: if the IR remote isn’t work, please press the” system code

switch key”, but please do not put the remote against the LM-HD808

3. Control via RS232.

1) The Interface of LM-HD808 control

2) The Message Window

2.1) Receive Window

The “receive window” will show the message received from HD808. When you click the Control

Buttons ( see step 4) or send Control Command ( see 2.3) to HD808, it will send out the

message about “operation results” as below:

2.2) Status Button

Click this button to read the status of HD808. The status is about which input is selected by the

output.

2.3) Send Window

Input the control command in this window. The control command use ASCII.

2.4) Setting Button

Click this button to enter Setting menu.

2.5) IP SET Button

Click this button to set IP address for LAN control (for example: 192.168.0.3).

2.6) EDID Copy Set button

To click the menu to choose the INPUT A and Output B can copy the EDID of Output B Display to the

Input A and also can do save of the EDID info . Factory Reset button represents the functions of

setting the EDID back to the default EDID.(1080 2CH)

2.7) EDID Set button

Select the Output Port in “Port Select” column, click “Read” button to get EDID from display

equipment.

Select the Input Port in “Port Select” column, click “Write” button to set EDID of this Input Port the

same as display equipment.

Click “Save as” button to save EDID read from display equipment as “*.bin” file.

Click “Open” button to open saved “*.bin” file, select the Input Port in “Port Select” column, click

“Download” button to set EDID of this Input Port the same as “*.bin” file.

3) The Com status

3.1) Connect state.

Connect state shows the com open or not.

3.2) Com select.

Select which com you will use.

Connect button.

The word on this button will change when the connection state changes. If the word is “Disconnect”,

then click this button, the com will be closed. If the word is “Connect”, then click this button, the com

will be opened.

Table des matières

Autres manuels LINK-MI Commutateur matriciel

LINK-MI

LINK-MI LM-MXS16 Manuel utilisateur

LINK-MI

LINK-MI LM-MXS8 Manuel utilisateur

LINK-MI

LINK-MI LM-HD808-4K Manuel utilisateur

LINK-MI

LINK-MI LM-MX42B-4K2K Manuel utilisateur

LINK-MI

LINK-MI LM-MX44U Manuel utilisateur

LINK-MI

LINK-MI LM-MX05 Manuel utilisateur

LINK-MI

LINK-MI LM-MX42-AUDIO Manuel utilisateur

LINK-MI

LINK-MI LM-MX42-4K2K Manuel utilisateur

LINK-MI

LINK-MI LM-MX88B Manuel utilisateur

Manuels Commutateur matriciel populaires d'autres marques

Broadcast Tools

Broadcast Tools SS 8.2 Manuel utilisateur

Altimium

Altimium MATF32 Manuel utilisateur

ALFAtron

ALFAtron ALF-MUK44N Manuel utilisateur

Monoprice

Monoprice Blackbird 15377 Manuel utilisateur

Kramer

Kramer XL 3216VS Manuel utilisateur

PTN

PTN FMX12 Manuel utilisateur

CYP

CYP nT15GX01 Manuel utilisateur

Kramer

Kramer VP-2x2 Manuel utilisateur

Kramer

Kramer Sierra Video 6432V5xl Manuel utilisateur

TESmart

TESmart HMA0402A40 Manuel utilisateur

Octava

Octava HD4XSTPMX Manuel utilisateur

Intelix

Intelix FLX-88 Mode d'emploi

Kramer

Kramer LASSEN XL 3232S Manuel utilisateur

Roland

Roland XS-1HD Manuel utilisateur

Kramer

Kramer VS-66HDCPxl Manuel utilisateur

Atlona

Atlona AT-HDMI-22M Manuel utilisateur

Link

Link HD8X8 Manuel utilisateur

AMX

AMX AVS-OP-2020-117 Instructions et recettes