LIGHTSIDE LS 125 Manuel utilisateur

9/11CH

1. Specifications

Power Supply:

AC100-240V, 50-60Hz

Power Consumption:

26W

LED Source:

1pcs*12W LUMINUS LED white

Beam Angle:

13°

Gobo wheel:

7 fixed gobos + spot, Gobo Shake effect, Gobo scroll mode

Color Wheel:

7 colors+white

Control mode:

DMX 512,Master-slave,Auto run,Sound-activated

DMX Channel:

7/12CH

Rotation Angle:

540° pan / 230° tilt (16-bit), Pan /Tilt Inversion mode

Focus:

Manual focus

Dimming: 0%-100% linear dimming

Shutter:

Pulse effect; random strobe slow to fast

Connector:

DMX via 3-pin XLR cable

Highest temperature:

Date In and out:

3-pin XLR cathode and anode plug

N.W/G.W:

3kg/3.5kg

Dimension:

159*147*265mm

2. SAFETY INTRODUCTION

• If the device has been exposed to temperature changes due to environmental changes, do not

switch it on immediately. The arising condensation could damage the device. Leave the device

switched off until it has reached room temperature.

• It is essential that the device is earthed. A qualified person must carry out the electric

connection.

• Make sure that the available voltage is not higher than stated at the end of this manual.

• Make sure the power cord is never crimped or damaged. If it is damaged, ask your dealer or

authorized agent to replace the power cord.

• Always disconnect from the mains, when the device is not in use or before cleaning it. Only

handle the power cord by plug. Never pull out the plug by tugging the power cord.

• DISCONNECT DEVICE: Where the MAINS plug or an appliance coupler is used as the

disconnect device, the disconnect device shall remain readily operable.

• Due to the magnifying type lens, please keep the lens out of contact with direct us. Direct we can

cause heat to build up inside of the unit, which will seriously damage unit.

CAUTION:

1. Be very careful during installation. Since you will be working with a dangerous voltage you

can suffer a life-threatening electric shock when touching live wired.

2. Never look directly into the light source, as sensitive persons may suffer an epileptic shock.

3. Please be aware that damages caused by manual modifications to the device are not subject to

warranty. Keep away from children and non-professionals.

4. The light doesn’t include any spare parts for repair, please check if all the parts are well

installed and screws are fitted tightly before operating. Do not use the light when the cover is

open.

GENERAL GUIDELINES

• This device is only allowed to be operated with an alternating current of max. 220-240V

AC/50-60Hz and was designed for indoor use only.

• Do not shake the device. Avoid brute force when installing or operating it.

• Operate the device only after having familiarized yourself with its functions. Do not permit

operation by person not qualified for operating the device. Most damages are the result of

unprofessional operation.

• Please use the original packaging if the device is to be transported.

• For safety reasons, please be aware that all modifications on the device are forbidden.

Furthermore, any other operation may lead to short-circuit, burns, electric shock, lamp

explosion, crash, etc. If this device will be operated in any way different to the one described in

this manual, the product may suffer damages and the guarantee becomes void.

3. Operation

1.Illustration Part

：

A.Menu

A B C D B.Up

C.Down

D.Enter

Operating Instructions: Press button A

“

”

to choose different functions ，Press button

“B” or “C” to amend parameter values, Press button “D” to“Enter”

LCD display different functions:（Press button“Enter” to enter）

NO. Display Function

1 ADDR

A001-A512 address settings

CHND

CH, 12CH channel selection

3 SLND

MAST, SL1, SL2, main and

auxiliary machinery selection

4 SHND

Select SOUD, AUTO control

5 SOUD

ON,OFF sound control switch

6 SENS

Sensitivity of sound control(0

closed, 100 is most sensitive)

7 BLND

YES, NO; the switch of

standby

8 LED

YES, NO; the switch of Back

light

DISP

YES, NO; reverse display

10 PAN

YES, NO; level motor reverse

11 TILT

YES,NO; vertical motor

reverse

12 MANU

PAN, TILT, COLOR,

GOBO,DIMM,

STROB,Manual testing

13 TEST

Automatic testing

14 HOUR

0 ---- 9999 time of use

machine

15 VER

V101 software version

number

16 RSET

YES, NO reset factory

settings

4. DMX512 Channels:

Mode 1:7 Channels

No Functions Illustration

0-255

X motor operation

0-255

Y motor operation

Dimming

0-255 1-100%

Strobe

0-7 off light, 8-15 opening,

16-

131 from slow to fast

strobe, 132-

139 open light,

fast off slowly open 140-181,

182-189 opening, 190-231

slow off quick opening,

232-239 opening, 240-247

248-

255 open random strobe

light,

Color wheel

0-31 Open,

32-

63 Color 1,

64-95 Col

or2,

96-

127 Color3,

128-

159 Color4,

160-

191 Color5,

192-

223 Color6,

224-255 Color7.

Gobo wheel

0-15 Open,

16-3 Color 1,

32-

47 Color2,

48-

63 Color3,

64-

79 Color4,

80-

95 Color5,

96-

111 Color6,

112-

127 Color7.

128-

146 Color7 jitter,

147 --- 164 Color6 jitter,

165 --- 182 Color5 jitter,

183 --- 201 Color4 jitter,

202 --- 219 Color3 jitter,

220 --- 237 Color2 jitter

238 --- 255 Colorl jitter

Marco

0-69 no functional, 70-89

Close light effective when the

horizontal or vertical motor

moves, 90-

109 close light

invalid when X or Y axis

moving, 110-

129 close light

effectively when the color

wheel move , 130-149 invalid

to close light when the color

wheel move , 150-

169 close

light effectively when Gobo

move. 170-189 close light

invalidly when Gobo move,

190-

199 no functional,

200-

209 overall reset,

210-

249 no functional,

250-255 sound control effect

nonfunctional, 200-209

overall reset, 210-

249 free

function, 250-

255 random

sound control effect

Mode 2:12 Channels

No Data Illustration

0-255

The level of motor travel

0-255

The level of motor tuning

0-255

Vertical stroke motor

0-255

Vertical motor tuning

0-255

Horizontal / vertical motor

speed, from fast to slow

level / vertical motor effect

No effect 0-15, 16-35 2,56-75

effect effect effect 1,36-

55 3,

76-95 effect 4, 96-

115 effect

5, 116-135 effect 6, 136-155

effect 7, 156-

175 results 8,

176-195 effect 9, 196-215

effect 10, 216-235 effect 11,

236-255 effect 12

0-255

0-255 horizontal / vertical

speed motor effect, from fast

to slow

Color wheel

0-31 Open, 32-63 Colorl,

64-95 Color2, 96-127 Color3,

128-159 Color4, 160-191

Color5, 192-

223 Color6,

224-255 Color7

GOBO wheel

0-15 Open,

16-

3 Color 1,

32-

47 Color2,

48-

63 Color3,

64-

79 Color4,

80-

95 Color5,

96-

111 Color6,

112-

127 Color7.

128-

146 Color7 jitter,

147 --- 164 Color6 jitter,

165 --- 182 Color5 jitter,

183 --- 201 Color4 jitter,

202 --- 219 Color3 jitter,

220 --- 237 Color2 jitter

238 --- 255 Colorl jitter

Marco

0-69 non-functional, 70-89

when the horizontal or

vertical motor motor moves

off the light and effective,

90-109 when moving off light

invalid X or Y axis, 110-129

when the color wheel to move

off the light effectively,

130-149 when the color wheel

to move off the light invalid,

150-169 Gobo move off when

the light effectively, 170-189

Gobo move off when the light

is invalid, 190-199

nonfunctional, 200-209

overall reset, 210-249 free

function, 250-255 random

sound control effect

0-255

dimming

Strobe

0-7 close light, 8-15

opening,16-131 strobe from

slow to fast , 132-139 open

light, fast off slowly open

140-181, 182-189 opening,

190-231 slow off quick

opening, 232-239 opening,

240-247 random strobe,

248-255 opening

Table des matières

Autres manuels LIGHTSIDE Matériel de DJ

LIGHTSIDE

LIGHTSIDE LED SPOT RGBW Manuel utilisateur

LIGHTSIDE

LIGHTSIDE LED MINI BEAM MK2 Manuel utilisateur

LIGHTSIDE

LIGHTSIDE DOUBLE BEAM Manuel utilisateur

LIGHTSIDE

LIGHTSIDE Mirror Ball Set 20 Manuel utilisateur

LIGHTSIDE

LIGHTSIDE MINI WASH Q4 Manuel utilisateur

LIGHTSIDE

LIGHTSIDE LED MINI BEAM Manuel utilisateur

LIGHTSIDE

LIGHTSIDE NANO PAR Manuel utilisateur

LIGHTSIDE

LIGHTSIDE SLIM PAR Q7 Manuel utilisateur

Manuels Matériel de DJ populaires d'autres marques

ALPHA LITE

ALPHA LITE ALPHA 1500 Manuel du propriétaire

Chauvet

Chauvet OVATION E-930VW Manuel utilisateur

Zumtobel

Zumtobel APHRODITE Home Manuel utilisateur

Snow Masters

Snow Masters Zig Oscillator Manuel utilisateur

EuroLite

EuroLite 50530554 Manuel utilisateur

Beamz

Beamz BUV243 Manuel utilisateur

thomann

thomann Stairville DJ Lase 40-G MK-III Manuel utilisateur

Eagletone

Eagletone 6 Eyes Flower Manuel utilisateur

EuroLite

EuroLite FLD-1508 Manuel utilisateur

Technical Pro

Technical Pro LG8xSEA Manuel utilisateur

JB Systems

JB Systems Lounge Laser DMX Manuel utilisateur

Lightmaxx

Lightmaxx Vega Halo 90 Manuel utilisateur

Elation

Elation FUZE WASH Z350 Manuel utilisateur

Maverick

Maverick MK3 WASH Manuel utilisateur

Infinity

Infinity TF-260C7 Fresnel Manuel utilisateur

Chauvet

Chauvet EVE E-50Z Manuel utilisateur

Eliminator Lighting

Eliminator Lighting E 138 Manuel utilisateur

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manuel utilisateur