Life Span digital ring Manuel utilisateur


Thank you for purchasing your LifeSpan
Multi-Function Digital Ring.
To turn on your ring, press any button on
the side of the ring. Your ring will remain on
at all times. If the ring displays the time,
the battery will last 1-2 years. If the ring
displays heart rate, the battery will last
40-50 hours. If for any reason you want to
turn off the ring, unscrew the battery
compartment and turn it off. This will cancel
and reset all settings.

01
INDEX
Product Features ............................................. 02
Description of LCD Display and Buttons ........... 03
Operation Flow Chart ........................................ 04
First Use (Time Setting Mode) ......................... 05
Temperature Mode ........................................... 06
Operations of Easy Mode ................................ 07
Operations of Training Mode ............................
08
Input of Personal Physiological Data..................
10
Low Battery Warning ........................................ 12
Replacing the Battery ....................................... 12
Notes for Operation ........................................... 13
Target Heart Rate Zones .................................. 14
Specifications .................................................... 16
Please read Page 5 for initial setting in the first use.

02
1. Easy Mode (Real-time continuity) (Refer to Page 7).
2. Training Mode (Input of Personal Physiological Data)
(Refer to Page 8 & 10).
3. Automatic conversion of heart rate percentage by a
user’s age (Refer to Page 11 & 15).
4. Displays switchable in Training Mode (Refer to Page 8).
Heart Rate Percentage
Cumulative Training Time
Average Heart Rate
Calories Burned
5. Setting of MAX/MIN heart rate limits (Refer to Page 11).
6. Display flashing and sound warning for heart rates greater
than the MAX target limit or less than the MIN target limit.
(Refer to Page 3 & 11).
7. 12-Hour Clock Function (Refer to Page 5).
8. Ambient Temperature Detection (Refer to Page 6).
9. Low Battery Warning (Refer to Page 12).
Please carefully read and follow instructions listed
in this owner’s manual.
PRODUCT FEATURES
10. Large LCD Display (Refer to Page 3).

03
Main Display
Time (Hr:Min)
Heart Rate
Training Time
(Hr:Min)
Average Heart Rate
Calories
Temperature
Heart Rate Percentage
Training Time (Second)
Heart Rate Icon
Calorie (Kcal)
Battery Low Icon
Warning icon for higher than the preset MAX limit
Average Heart Rate
(AVG)
Minor Display
Time (Second)
Unit Setting
DESCRIPTION OF LCD DISPLAY
Warning icon for lower than the preset MIN limit
Button C
(Start / Stop)
For operation details for all buttons,
please refer to the remainder of
this manual.
Button B (Mode)
Enter Training Mode
Set a reduced value
Start heart rate detection
Pause heart rate detection
Start Training Mode
Pause Training Mode
Set an increased value
Button A(Set)
Display Ambient
Temperature
Display Time
Set personal data
for Traing Mode
Set a reduced value.
BUTTONS

04
OPERATION FLOW CHART
Easy Mode
for
measurement
Training Mode
Training paused
Time Mode
Display
Temperature
2 seconds
2 seconds
Training
Data
resumed
Set “Hour” Set Gender Average
Heart Rate
Heart Rate
Percentage
Cumulative
Training
Time
Average
Heart Rate
Calorie
burned
Calorie
burned
Set Age
Set Weight
Unit
Set Weight
Set Height
Set MAX
Heart Rate
Set“Minute”
Set “Second”
Set
Temperature
Unit
Set MIN
Heart Rate
2 seconds

05
FIRST USE (Time Setting Mode)
follow the steps below.
The default time on the ring is 00:00 00. To set the time
At Time Mode, continuously press Button A for 2 seconds to
enter Time Setting Mode.
1. Hour Setting (12-hour clock system)
Press Button Cto increase.
Press Button Bto decrease.
Press Button Ato enter the next step.
Press Button Cto increase.
Press Button Bto decrease.
Press Button Ato enter the next step.
Press Button Cto reset to 00.
Press Button Bto reset to 00.
Press Button Ato enter the next step
2. Minute Setting
3. Second Setting

06
4. Temperature Unit Setting
Note!
Note!
Press Button Cto switch.
Press Button Bto switch.
Press Button Ato confirm setting.
A long beep hints setting completed.
After a battery replacement, please press any button to
activate Time Mode. Continuously press Button A for 2
seconds to enter Time Setting Mode for a renewal.
Without setting, 00:00 00 is the default for the system.
The device’s temperature measurement function provides
the ambient temperature information for reference purpose
only and cannot be used to measure body temperature or
surface temperature.
( ℉=Fahrenheit ,℃= Celsius )
TEMPERATURE MODE
At Time Mode, press Button Ato display
ambient temperature and press Button Aone
more time to return to Time Mode.
Temperature is updated once every minute.
Ambient temperature detected by the system
cannot be displayed immediately but after
3-minute response time.

07
OPERATION OF EASY MODE
As shown at left, the heart rate cannot
be detected because improper fit.
When heart rate signals are not detected by
the device for 30 seconds continuously,
operation mode will be switched to Time
Mode by the system.
To continue measurement, please put on the
ring properly and press Button C
to activate
Easy Mode again.
1. At Time Mode, press Button Cto activate
Easy Mode for measurement of heart rate.
At Easy Mode, only the measured heart rate
per minute along with the real time heartbeat
icon are displayed.
As shown at left, the ring is starting to detect
heart rate.
2. Display the current heart rate per minute.
Press Button Cto terminate heart rate
measurement.
As shown at left, the current heart rate is
72 beats per minute.
Note!
For better performance, it is recommended that the
user puts the ring on one finger which fits best, so that
measurement accuracy will not be affected by the sway of
the ring because of improper fitness and/or vehement
movement.
Slightly clench the fist to keep a stable measurement
if necessary. (Refer to Page 13)
No Heart Rate Signal Detected

08
OPERATION OF TRAINING MODE
1. At Time Mode, press Button
B
to enter
Training Mode. 00:00 00 will show on
the display.
Contents provided in Training Mode are current heart rate &
strength percentage, cumulative training time, average
heart rate, and calories burned.
Prior to using Training Mode input, the personal physiological
data described on Page 10 to ensure the accuracy of system
data when training.
2. Put on your ring snugly and press Button
Cto start Training Mode. The ring will display
heart rate and exercise strength percentage,
in the format shown at left.
3.
To pause training mode, press Button C.
The cumulative training time will flash on
the display as shown at left (1 hour, 2 min,
3 sec). To check other training, press Ato
display average heart rate. Press Button A
again to display calories burned.
Table des matières
Autres manuels Life Span Fitness électronique

















