Liberty AV Intelix INT-PS82-H2 Manuel utilisateur

Rev 190224 Phone: 719-260-0061
Toll-Free: 800-530-8998
Fax: 719-260-0075
INT-PS82-H2 Owners Manual
11675 Ridgeline Drive
Colorado Springs, CO
80921

INT-PS82-H2 Owners Manual
2
Important Safety Instrucons
»Please completely read and verify you understand all instrucons in this manual before operang this equipment.
»Keep these instrucons in a safe, accessible place for future reference.
»Heed all warnings.
»Follow all instrucons.
»Do not use this apparatus near water.
»Clean only with a dry cloth.
»Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers)
that produce heat.
»Use only accessories specied or recommended by Intelix.
»Explanaon of graphical symbols:
◊ Lightning bolt/ash symbol: the lightning bolt/ash and arrowhead within an equilateral triangle
symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the
product enclosure which may be of sucient magnitude to constute a risk of shock to a person or
persons.
◊ Exclamaon point symbol: the exclamaon point within an equilateral triangle symbol is intended
to alert the user to the presence of important operang and maintenance (servicing) instrucons
in the literature accompanying the product.
»WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS.
»Use the mains plug to disconnect the apparatus from the mains.
»THE MAINS PLUG OF THE POWER CORD MUST REMAIN READILY ACCESSIBLE.
»Do not defeat the safety purpose polarized or grounding-type plug. A polarized plug has two blades with one wider
than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong
is provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of
your obsolete outlet. Cauon! To reduce the risk of electrical shock, grounding of the center pin of this plug must be
maintained.
»Protect the power cord from being walked on or pinched parcularly at the plugs, convenience receptacles, and the
point where they exit from the apparatus.
»Do not block the air venlaon openings. Only mount the equipment per Intelix’s instrucons.
»Use only with the cart, stand, table, or rack specied by Intelix or sold with the equipment. When/if a
cart is used, use cauon when moving the cart/equipment combinaon to avoid injury from p-over.
»Unplug this apparatus during lightning storms or when unused for long periods of me.
»Cauon! Shock Hazard. Do not open the unit.
»Refer to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as
power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.

INT-PS82-H2 Installaon Guide
3
Table of Contents
Product Overview��������������������������������������������������������������������������������������������������������������������������������������� 5
Product Contents���������������������������������������������������������������������������������������������������������������������������������������� 5
Front and Rear Panels��������������������������������������������������������������������������������������������������������������������������������� 6
Front Panel - Switcher ����������������������������������������������������������������������������������������������������������������������������������� 6
Rear Panel - Switcher ������������������������������������������������������������������������������������������������������������������������������������ 7
Front Panel - HDBaseT Receiver �������������������������������������������������������������������������������������������������������������������� 8
Rear Panel - HDBaseT Receiver ��������������������������������������������������������������������������������������������������������������������� 9
Installaon Instrucons���������������������������������������������������������������������������������������������������������������������������� 10
Mount the Matrix ���������������������������������������������������������������������������������������������������������������������������������������10
Rack Mounng Instrucons..................................................................................................................10
Connect Sources������������������������������������������������������������������������������������������������������������������������������������������10
Video Inputs .........................................................................................................................................10
HDBaseT Input ......................................................................................................................................10
Connect Displays�����������������������������������������������������������������������������������������������������������������������������������������11
HDMI Outputs ......................................................................................................................................11
HDBaseT Output ...................................................................................................................................11
Connect Audio (Oponal)����������������������������������������������������������������������������������������������������������������������������11
Connecng Control �������������������������������������������������������������������������������������������������������������������������������������12
RS232 Port Wiring ................................................................................................................................12
Relay Port Wiring ..................................................................................................................................12
IR Receiver Connecon IR Remote Control ..........................................................................................12
Connect Ethernet (Web Browser) Control (Oponal) ����������������������������������������������������������������������������������13
Router Connecon ...............................................................................................................................13
Crossover Cable Connecon .................................................................................................................13
Web Browser Control ...........................................................................................................................13
Applying Power �������������������������������������������������������������������������������������������������������������������������������������������14
HDBaseT Cabling Requirements���������������������������������������������������������������������������������������������������������������� 14
A/V Diagram �������������������������������������������������������������������������������������������������������������������������������������������� 15
IR Remote Control ������������������������������������������������������������������������������������������������������������������������������������ 16
On Screen Display (OSD) Menu ����������������������������������������������������������������������������������������������������������������� 17
Accessing OSD Menu�����������������������������������������������������������������������������������������������������������������������������������17
Menu Opons ���������������������������������������������������������������������������������������������������������������������������������������������17

INT-PS82-H2 Owners Manual
4
Web GUI Control / System Sengs ����������������������������������������������������������������������������������������������������������� 18
Switcher Control������������������������������������������������������������������������������������������������������������������������������������������18
Connecng to Web GUI Control ...........................................................................................................18
VIDEO SWITCHING ................................................................................................................................19
RESOLUTION .........................................................................................................................................20
AUDIO ...................................................................................................................................................21
POC CONFIGURATION ...........................................................................................................................22
EDID MANAGEMENT ............................................................................................................................23
RELAY CONFIGURATION ........................................................................................................................24
CEC - SOURCE CONTROL .......................................................................................................................25
CEC - DISPLAY CONTROL .......................................................................................................................26
CEC - USER DEFINED .............................................................................................................................27
RS232 Control - PORT MODE ................................................................................................................28
RS232 CONTROL - COMMAND .............................................................................................................29
TAGS .....................................................................................................................................................30
NETWORK .............................................................................................................................................31
SECURITY ..............................................................................................................................................32
RS232 and TCP/IP Control ������������������������������������������������������������������������������������������������������������������������� 33
A/V Roung�������������������������������������������������������������������������������������������������������������������������������������������������33
Preset Sengs ��������������������������������������������������������������������������������������������������������������������������������������������34
Audio Control ����������������������������������������������������������������������������������������������������������������������������������������������34
Relay Control�����������������������������������������������������������������������������������������������������������������������������������������������38
RS232 Pass Through Commands�����������������������������������������������������������������������������������������������������������������39
System Commands��������������������������������������������������������������������������������������������������������������������������������������41
Technical Specicaons - Switcher ������������������������������������������������������������������������������������������������������������ 42
Technical Specicaons - HDBaseT Receiver���������������������������������������������������������������������������������������������� 44

INT-PS82-H2 Installaon Guide
5
The INT-PS82-H2 is an 8x2 mul-format seamless presentaon matrix switcher featuring four
HDMI, one HDBaseT, one USB-C , one DisplayPort and one VGA input as well as an HDBaseT and
two HDMI outputs, one of which is a mirrored from the HDBaseT output. The switcher supports
automac switching based on video sensing, and each output can be congured separately for auto
or manual switching. The INT-PS82-H2 provides true 4K up/down scaling up to 4K@60Hz / 4:4:4 /
8 bit deep color and both outputs can be scaled to dierent resoluons independently. The INT-
PS82-H2 provides external audio inputs that can be embedded in HDBaseT, HDMI and VGA video
inputs respecvely. Moreover, it provides an global, auxiliary MIX audio input that can be assigned
to any output. The switcher can de-embed digital and/or analog audio from both outputs for audio
reinforcement purposes.
The INT-PS82-H2 ships with an 18G HDMI 2.0 HDBaseT receiver capable of extending 4K signals up to
40m / 132’ or 1080p up to 70m / 232’. The INT-PS82-H2 can also tunnel RS232 and bi-direconal IR sig-
nals to and from the HDBAseT receiver. The extension system enables high data rates by ulizing visual
lossless compression at a 2:1 data compression rate when the signal surpasses 10Gbps, anything under
10Gbps will never be compressed. Supports stac HDR (HDR10) only when data rate exceeds 18Gbps,
supports dynamic HDR (HDR10+ / Dolby Vision) when data rate is 10Gbps or less.
The switchers funcons can be controlled by built in web server / GUI, IR remote, RS232, IP or by
front panel buon operaon. Two relay switches are built in for projector screen or shades control.
Product Overview
Product Contents
• INT-PS82-H2 8x2 HDMI 2.0 Switcher
• 70m HDBaseT 2.0 Receiver
• Quick Install Guide
• (3) 3-pin Phoenix connectors
• (7) 5-pin Phoenix connectors
• (1) 3.5mm Audio Cable (for IR cascading)
• IR Remote
• (1) IR Emier
• (1) IR Receivers
• (1) DC24V 6A power supply with US power plug
• (2) Rack mount ears with 6 mounng screws
• (4) Plasc Cushions

INT-PS82-H2 Owners Manual
6
Front and Rear Panels
Front Panel - Switcher
1 2 3 4 5
1. POWER LED - Illuminates solid RED when switcher is in standby mode or illuminates GREEN when
device is powered ON.
2. SOURCE
• 1- HDBT - HDBaseT input selecon / Le key for On Screen Display (OSD)
• 2- HDMI - HDMI input selecon / Right key for On Screen Display (OSD)
• 3- HDMI - HDMI input selecon / Up key for On Screen Display (OSD)
• 4- HDMI - HDMI input selecon / Down key for On Screen Display (OSD)
• 5- HDMI - HDMI input selecon
• 6- VGA - VGA input selecon
• 7- DP - DisplayPort input selecon
• 8- USB C - USB-C input selecon / Enter key for On Screen Display (OSD)
• AUTO - Auto switch selector. Press this to enter / exit auto switch mode. Press and hold for 2
seconds to enable On Screen Display (OSD) menu
3. OUTPUTS
• 1- HDMI - HDMI output selector
• 2- HDBT - HDBaseT output selector
Note: To make a video route, select the desired SOURCE buon, then select the desired OUTPUT
buon. The video will switch in 2 to 3 seconds. For faster switch response, select the desired SOURCE
buon, then select the desired OUTPUT buon and then press the selected SOURCE buon again.
4. RESOLUTION - Two output video resoluon selectors. Press 1.HDMI or 2.HDBT buon repeatedly
to cycle through the available video resoluons. The output will reset once an opon is selected
5. VOLUME - Variable audio control
• Press the volume knob to toggle among MIX, HDMI OUT and HDBT OUT audio control.
• Rotate the knob to increase decrease volume of the selected audio
• Press and hold the knob at least 3 seconds to mute selected audio, rotate the knob to unmute

INT-PS82-H2 Installaon Guide
7
Rear Panel - Switcher
1 2
3 4
5
1. INPUT
• 1- HDBT - RJ45 / HDBaseT Input, external 5 pin phoenix for balanced audio input
• 2- HDMI - HDMI input, external 5 pin phoenix for balanced audio input
• 3- HDMI - HDMI input, external 5 pin phoenix for balanced audio input
• 4- HDMI - HDMI input
• 5- HDMI - HDMI input
• 6- VGA - VGA with 3.5mm audio input
• 7- DP - DisplayPort input
• 8- USB C - USB-C input (supports ALT-DP video mode)
• IR - 3.5mm IR input to connect IR receiver for IR pass through
• MIX - 5 pin phoenix for global balanced audio input
2. OUTPUTS
• 1- HDMI - HDMI output
• 2- HDMI - HDMI output (mirrors HDBT output)
• 2- HDBT - HDBaseT output
• IR IN - 3.5mm IR input to connect IR receiver for IR pass through
• IR OUT - 3.5mm IR input to connect IR emier for IR pass through
3. AUDIO OUTPUT
• 1 - 5 pin phoenix for balanced analog audio input and one digital SPDIF audio output for
1-HDMI output audio de-embedding
• 2 - 5 pin phoenix for balanced analog audio input and one digital SPDIF audio output for
2-HDBT output audio de-embedding
4. CONTROL
• RS232 - 3 pin phoenix connector for RS232 control
• RELAY 1-2 - (2) 3 pin phoenix connectors for relay control
• IR EYE - 3.5mm IR input to connect IR receiver for local switcher control
• TCP/IP - RJ45 to control device via network / web GUI
• FIRMWARE - Type A USB port for rmware upgrade
5. DC24V- Locking power supply port

INT-PS82-H2 Owners Manual
8
Front Panel - HDBaseT Receiver
1 2
1. MODE SWITCH
• CTRL - When placed in control mode, HDBaseT receiver will receiver RS232 pass through
commands from the switcher
• UPDATE B - Update mode for system program
• UPDATE A - Update mode for Valens program
2. POWER LED - Illuminates solid RED when power is applied

INT-PS82-H2 Installaon Guide
9
Rear Panel - HDBaseT Receiver
1 2 3 4 5
1. DC12V- Locking power supply port
2. HDBT IN - RJ45 HDBaseT connecon. Connect Cat6 cable to HDBT output transmier of the INT-
PS82-H2
3. IR IN / IR OUT
• 3.5mm IR input port for connecon to IR receiver or IR system
• 3.5mm IR output port for connecon to IR emier
4. RS232 - 3 pin Phoenix connector port for connecng / passing RS232 control from INT-PS82-h2
5. HDMI OUT - HDMI output port for connecon to video display

INT-PS82-H2 Owners Manual
10
Installaon Instrucons
Mount the Matrix
Rack Mounng Instrucons
At least 2 inches of free air space is required on both sides of the INT-PS82-H2 for proper side venlaon. Avoid
mounng the INT-PS82-H2 near a power amplier or any other source of signicant heat.
Aach the supplied rack ears to the sides of the INT-PS82-H2 matrix. The matrix requires one rack unit (1 RU) of
space. It is recommended that you leave an empty rack space above and below the INT-PS82-H2 for addional
cooling.
Connect Sources
Connect source devices to the HDBaseT, HDMI, Display Port, USB-C or VGA inputs. When using HDMI cables for
source inputs, use a High Speed HDMI cable that is less than or equal to 1.5 meters in length for 4k60 signals and
5 meters for 1080p signals. The HDBaseT input is compable with all Intelix HDBaseT transmiers.
When connecng a source device to the USB-C input using a USB-C cable, be sure the USB-C cable is capable
of supporng video and is no longer than 2 meters (6.6’) in total length. The INT-PS82-H2 USB-C input supports
ALT-DP mode for video, to ensure a laptop is compable with the INT-PS82-H2 check the laptops capability of
supporng this mode.
Note that not all laptops with USB-C port opons will support video or more specically AT-DP video mode.
Video Inputs
HDBaseT Input
Connect a solid core CAT6 F/UTP rated category cable to the INT-PS82-H2 HDBaseT input and a
compable Intelix HDBaseT transmier. The INT-PS82-H2 is compable will all Intelix branded HDBaseT
transmiers. Use TIA/EIA-568B wiring for Category 6 connecon between the transmier and the
INT-PS82-H2 receiver input.
Connect a source device to the HDMI input of an Intelix compable HDBaseT transmier using a High
Speed HDMI cable that is less than or equal to 1.5 meters in length for 4k60 signals and 5 meters for
1080p signals.
Note: The HDBaseT receiver input supports up to 40m/132’ for 4K@60Hz / 4:2:0 / 8 bit color signals
(up to 10Gbps) and 70m/232’ for 1080p signals using CAT6 F/UTP cable.
Autres manuels pour Intelix INT-PS82-H2
1
Table des matières
Autres manuels Liberty AV Commutateur matriciel



















