LG SQC1 Manuel utilisateur
OWNER’S MANUAL
Wireless
Sound Bar
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
SQC1 (SQC1, SPQ1-W)
www.lg.com
Copyright © 2022 LG Electronics Inc. All Rights Reserved.
2211_Rev01
1 Getting Started
Getting Started2
Getting Started
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufcient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, should be placed on the
apparatus.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: No naked ame sources, such as lighted
candles, should be placed on the apparatus.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings should never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
NOTICE: For safety marking information including
product identication and power supply ratings,
please refer to the main label on the bottom or the
other surface of the product.
CAUTION: Be careful to make sure children do not
put their hands or any objects into the *speaker duct.
* speaker duct: A hole for plentiful bass sound on
speaker cabinet. (enclosure)
Getting Started 3
Getting Started
1
CAUTION concerning the Power Cord
The Power Plug is the disconnecting device. In case
of an emergency, the Power Plug must remain readily
accessible.
Check the specication page of this owner’s manual
to be certain of the current requirements.
Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords, frayed
power cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could result
in electric shock or re. Periodically examine the
cord of your device, and if its appearance indicates
damage or deterioration, unplug it, discontinue use of
the device, and have the cord replaced with an exact
replacement part by an authorised service centre.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the device.
CAUTION: Only use the AC adapter supplied with
this device. Do not use a power supply from another
device or another manufacturer. Using any other
power cable or power supply may cause damage to
the device and void your warranty.
For models using a battery
This device is equipped with a portable battery or
accumulator.
CAUTION: Risk of re or explosion if the battery is
replaced by an incorrect type.
For models using a built-in battery
Do not store or transport at pressures lower than
11.6 kPa and at above 15,000 m altitude.
yreplacement of a battery with an incorrect type
that can defeat a safeguard (for example, in the
case of some lithium battery types);
ydisposal of a battery into re or a hot oven, or
mechanically crushing or cutting of a battery, that
can result in an explosion;
yleaving a battery in an extremely high temperature
surrounding environment that can result in an
explosion or the leakage of ammable liquid or
gas; and
ya battery subjected to extremely low air pressure
that may result in an explosion or the leakage of
ammable liquid or gas.
Getting Started4
Getting Started
1
Symbols
~Refers to alternating current (AC).
0Refers to direct current (DC).
Refers to class II equipment.
1Refers to stand-by.
!Refers to “ON” (power).
Refers to dangerous voltage.
Table of Contents 5
1
2
3
4
5
Table of Contents
1 Getting Started
2 Safety Information
6 Unique features
6 Introduction
6 – Symbols used in this manual
7 Remote control
8 Front panel
8 Rear panel
9 About LED condition
11 Installing the sound bar
2 Connecting
12 Connecting the AC Adapter
12 Wireless subwoofer connection
14 Connecting to your TV
14 – Using an OPTICAL cable
14 Optional equipment connection
14 – OPT. IN connection
15 – PORT. IN connection
3 Operating
16 Operations
16 – DRC (Dynamic Range Control)
16 – Turn off the sound temporarily
16 – Using your TV remote control
16 – Auto display Dimmer
16 – Auto power down
17 – AUTO POWER On/Off
18 – Auto function change
19 Using BLUETOOTH® technology
19 – Listening to music stored on the Bluetooth
devices
20 – BLUETOOTH connection lock (BT lock)
21 Sound adjustment
21 – Setting the surround mode
21 – Adjust the woofer level settings
4 Troubleshooting
22 Troubleshooting
22 – General
23 – NOTES to use wireless
5 Appendix
24 Trademarks and licenses
25 Specifications
26 Maintenance
26 – Handling the unit
Getting Started6
Getting Started
1
Unique features
Auto power down
This unit supports to turn off by itself for saving
energy consumption.
Portable In
Listen to music from your portable device.
(MP3 player, Notebook, Smart phone, etc..)
BLUETOOTH®
Listen to music stored on your Bluetooth device.
Introduction
Symbols used in this manual
, Note
Indicates special notes and operating features.
> Caution
Indicates cautions for preventing possible damages
from abuse.
Getting Started 7
Getting Started
1
Remote control
Replacement of battery
Remove the battery cover on the rear of the remote
control, and insert battery with and matched
correctly.
Risk of re or explosion if the battery is replaced by
an incorrect type.
• • • • • • • • • • • • • • a • • • • • • • • • • • • •
1(Standby) : Switches the unit ON or OFF
F (Function) : Selects the function.
OPTICAL : Selects the optical function.
[ (Mute) : Mutes the sound.
STANDARD : Selects standardized sound.
BASS BLAST: Reinforces the bass and powerful
sound.
VOL (Volume) o/p: Adjusts speaker volume.
• • • • • • • • • • • • • • b • • • • • • • • • • • • •
C/V (Skip/Search) : Skips Fast backward or
Forward.
N (Play/Pause) :
- Starts playback.
- Pauses playback.
You can control a Bluetooth device using C/
V (Skip) and N (Play/Pause) buttons on the
remote control.
, Note
DRC ON/OFF :
- Turns on or off DRC function.
(Page 16)
- Controls this unit using TV remote.
(Page 16)
WOOFER LEVEL o/p: Adjusts sound level of
subwoofer.
AUTO POWER ON/OFF :
- Turns on or off AUTO POWER function. (Page
17)
- Turns on or off the Bluetooth connection lock
function. (Page 20)
Getting Started8
Getting Started
1
Front panel
Rear panel
Ao/p (Volume) : Adjusts volume level
F (Function) : Selects the function.
1(Standby)
B USB (SERVICE ONLY) : S/W download connector.
CPORT.IN (Portable) : Connect to a Portable
device.
DOPT. IN (Optical) : Connect to an Optical device.
EDC IN : Connect to the AC adapter.
A
Standby LED (Red)
B
Function LED (White)
C
Remote sensor
D
The buttons are located on the rear.
Getting Started 9
Getting Started
1
About LED condition
LED Condition Description
OPTICAL LED turns on. OPTICAL function is selected.
Bluetooth LED turns on. Paired with Bluetooth device.
Bluetooth LED blinks. Waiting for Bluetooth connection.
PORTABLE LED turns on. PORTABLE function is selected.
yWhen you press any button, standby LED (Red) on the main unit blinks.
yWhen you press [ (Mute) button, standby LED (Red) blinks slowly.
yWhen this unit reaches minimum volume, standby LED (Red) turns on for 2 seconds and blinks slowly.
yWhen this unit reaches maximum volume, standby LED (Red) turns on for 2 seconds.
yWhen you press volume (o/p) button continually, standby LED (Red) blinks quickly.
, Note
Getting Started10
Getting Started
1
Useful functions for using the unit
Function Description To do Do this
TV Remote On/
Off
(Page 16)
It allows you to control the
volume of this unit by your TV
remote control even by other
company’s product.
Initial setting of this function
was set to on.
ON Press and hold DRC ON on the remote
control for about 2 seconds.
The standby LED (Red) blinks once.
OFF Press and hold DRC OFF on the remote
control for about 2 seconds.
The standby LED (Red) blinks once.
BT Lock On/Off
(Page 20)
It allows you to connect a
Bluetooth device only on
Bluetooth functions.
Initial setting of this function
was set to off.
ON Press and hold AUTO POWER ON on the
remote control for about 2 seconds in
Bluetooth function.
The standby LED (Red) blinks once.
OFF Press and hold AUTO POWER OFF on
the remote control for about 2 seconds in
Bluetooth function.
The standby LED (Red) blinks once.
Auto Power
On/Off
(Page 17)
It allows the unit to turn on
and off automatically by input
signals :
Optical or Bluetooth.
Initial setting of this function
was set to on.
ON Press AUTO POWER ON on the remote
control.
The standby LED (Red) blinks once.
OFF Press AUTO POWER OFF on the remote
control.
The standby LED (Red) blinks once.
Autres manuels pour SQC1
7
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels LG Système de haut-parleurs
