LG LW332-F Manuel utilisateur
OWNER'S MANUAL
High Definition Network Camera
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
LW332-F
LW335-F
LW332 Series
LW335 Series
P/NO : MFL67164907 1106 (V1.0)
2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
dangerous voltage within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
FCC WARNING: This equipment may generate or use
radio frequency energy. Changes or modifications to this
equipment may cause harmful interference unless the
modifications are expressly approved in the instruction
manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is
made.
REGULATORY INFORMATION: FCC Part 15
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be
required to correct the interference at his own expense.
• A suitable conduit entries, knock-outs or glands shall
be provided in the cable entries of this product in the
end user.
3
• Caution: Danger of explosion if battery is incorrectly
replaced. Replaced only with the same or equivalent
type recommended by the manufacturer. Dispose
of used batteries according to the manufacturer’s
instructions.
• Holes in metal, through which insulated wires pass,
shall have smooth well rounded surfaces or shall be
provided with brushings.
This Class A digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe A est conforme à la
norme NMB-003 du Canada.
Warning: Do not install this equipment in a confined space
such as a bookcase or similar unit.
Warning: Wiring methods shall be in accordance with the
National Electric Code, ANSI/NFPA 70.
Warning: This is a class A product. In a domestic
environment this product may cause radio interference
in which case the user may be required to take adequate
measures.
Warning: To reduce a risk of fire or electric shock, do not
expose this product to rain or moisture.
Caution: This installation should be made by a qualified
service person and should conform to all local codes.
Caution: To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified personnel only.
Caution: The apparatus shall not be exposed to water
(dripping or splashing) and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
To disconnect power from mains, pull out the mains
cord plug. When installing the product, ensure that the
plug is easily accessible.
4
Disposal of your old appliance
1. When this crossed-out wheeled bin
symbol is attached to a product it means
the product is covered by the European
Directive 2002/96/EC.
2. All electrical and electronic products
should be disposed of separately
from the municipal waste stream
via designated collection facilities
appointed by the government or the
local authorities.
3. The correct disposal of your old
appliance will help prevent potential
negative consequences for the
environment and human health.
4. For more detailed information about
disposal of your old appliance,
please contact your city office, waste
disposal service or the shop where you
purchased the product.
EEE Compliance with Directive. (for Turkey only)
LG Electronics hereby declares that this/
these product(s) is/are in compliance with
the essential requirements and other relevant
provisions of Directive 2004/108/EC,
2006/95/EC, and 2009/125/EC.
European representative :
LG Electronics Service Europe B.V.
Veluwezoom 15, 1327 AE Almere.
The Netherlands
(Tel : +31-(0)36-547-8888)
5
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
Important Safety Instructions
6
Handling of the unit
Be careful not to spill water or other liquids on the unit. Be
cautious not to get combustible or metallic material inside
the body. If used with foreign matter inside, the device is
liable to fail or to get cause of fire or electric shock.
• Remove dust or dirt on the surface of the lens with a
blower.
• Use a dry soft cloth to clean the body. If it is very dirty,
use a cloth dampened with a small quantity of neutral
detergent then wipe dry.
• Avoid the use of volatile solvents such as thinners,
alcohol, benzene and insecticides.
They may damage the surface finish and/or impair the
operation of the device.
Operating and storage location
Avoid viewing a very bright object (such as light fittings)
during an extended period. Avoid operating or storing the
unit in the following locations.
• Extremely hot or cold places (operating temperature
from -10 °C to 50 °C, however, we recommend that the
unit be used within a temperature range from
0 °C to 45 °C)
• Damp or dust place
• Places exposed to rain
• Places subject to strong vibration
• Close to generators of powerful electromagnetic
radiation such as radio or TV transmitters.
Cautions for Safe Operation
7
Features................................................................. 8
Part Names and Functions................................... 9
Connections ........................................................12
Precautions .....................................................................12
Connection Overview .................................................12
Connecting Display Device.......................................13
Connecting Network ...................................................13
Connecting Power Source.........................................14
Connecting Alarm Device..........................................15
Connecting Microphone and Speaker Device ...16
Using the micro SD card.............................................17
Mounting the Lens.......................................................19
Focus adjustment ......................................................21
Camera Installation ......................................................21
Operation and settings ......................................22
Before using the system.............................................22
Recommended PC Requirements...........................23
Accessing the LG IP device ........................................23
LG Smart Web Viewer Overview..............................25
Conguring the LG Network Camera Device......28
OSD Menu Setup...........................................................56
Troubleshooting ................................................. 74
Open source software notice............................. 77
Specication .......................................................80
Contents
8
Features
The LG Network Camera is designed to use on an Ethernet
network and must be assigned an IP address to make it
accessible.
This manual contains instructions on how to install and
manage the LG Network Camera in your networking
environment. Some knowledge of networking
environments would be beneficial to the reader.
Should you require any technical assistance, please contact
authorized service center.
• Dual H.264 Stream for single Video Input
• Multi-Codec (H.264, MJPEG) Streaming
• Intelligent Video Analysis (Option)
• PoE (Power over Ethernet) Support (802.3af )
• 2 Power (DC 12 V, PoE) Support
• Audio Support (G.711, G.726 Full Duplex)
• Pre/Post Alarm Support
• High resolution and high sensitivity with a 6.08 mm
progressive scan CMOS.
• Auto Exposure
• Day & Night function
• WDR (Wide Dynamic Range) is available
• ABF Auto Back Focus function
Features Chart
This table shows the differences between the models.
LW335 is used for the description, operations and details
provided in this manual.
Models LW332 LW335
VA No Yes
9
a b c a Lens mount cap
The lens mount of the camera is covered using a cap
to protect it. Remove the lens cap covering the lens.
bCamera installation hole
Use this hole to install the camera on the wall.
cLens iris output connector (LENS)
This 4- pin connector is used to send the Iris control
signal and power supply to an auto-iris type lens.
Part Names and Functions
10
Part Names and Functions
AUDIO
OUT
IN
j
k
l
m
n
o
d
e
f
g
h
i
dVIDEO OUT
Supplies analog video signal (composite) to the
connected device.
eABF Auto Back Focus button
ABF Auto Back Focus is an adjustable function for the
back focus automatically. Before you use it, you should
set the zoom and focus of the lens approximately. If
you press this button, the camera will be activated
to adjust the back focus automatically. If you keep
pressing this button about 4 seconds, the focus reset
function will be activated.
fExternal device connectors
• A IN(R)/A IN (Sensor input) Terminals:
Provides physical interface for sensor.
• A OUT(R)/A OUT (Relay output) Terminals:
Provides physical interface for Alarm/Relay.
gAUDIO IN (Line Level Input)
Input for a mono microphone, or a line-in mono
signal.
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels LG Caméra de sécurité
LG
LG LNB5220 Manuel utilisateur
LG
LG LCV5300R-BN Manuel utilisateur
LG
LG LD300N-B Manuel utilisateur
LG
LG L6223 Series Manuel utilisateur
LG
LG LDW2010F-P Manuel utilisateur
LG
LG LNV7210R Manuel utilisateur
LG
LG LNB5100 series Manuel utilisateur
LG
LG LNU3210R Manuel utilisateur
LG
LG LPT-OI551HQ Manuel utilisateur
LG
LG LVW900 series Manuel utilisateur
LG
LG LW6454 series Manuel utilisateur
LG
LG LCP3750T Series Manuel utilisateur
LG
LG LVC-S60HM Manuel utilisateur
LG
LG LVC-C513HM Manuel utilisateur
LG
LG LW9424 Manuel utilisateur
LG
LG LVC-A730NP Manuel utilisateur
LG
LG LPT-DW113P Manuel utilisateur
LG
LG LND5100R series Manuel utilisateur
LG
LG LW342 series Manuel utilisateur
LG
LG LV700N-D1 Manuel utilisateur
