LG M198WDP Manuel utilisateur
Please read this manual carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote
this information to your dealer when you require
service.
OWNER’S MANUAL
MM1199WWDDPP
MM2222WWDDPP
Trade Mark of the DVB Digital Video
Broadcasting Project (1991 to 1996)
IIDD NNuummbbeerr((ss))::5576 : M19 WDP
5577 : M22 WDP
1
PREPARATION
FRONT PANEL CONTROLS
■
This is a simplified representation of the front panel. The image shown may be somewhat different from your
set.
• Remote Control Sensor
• Power Indicator
• Power Sensor
INPUT MENU VOL PROK
PROGRAMME
Buttons
VOL ME
Buttons
MEN
Button
OK
Button
INP T
Button
2
PREPARATION
BACK PANEL INFORMATION
PCMCIA (Personal Computer Memory Card
International Association) Card Slot
(This feature is not available in all countries.)
Power Cord Socket
This set operates on AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the set on DC power.
HDMI/DVI Input
Connect a HDMI signal to HDMI IN.
Or DVI (VIDEO) signal to HDMI/DVI port with
DVI to HDMI cable.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
Antenna Input
Connect over-the-air signals to this jack.
Component Input
Connect a component video/audio device to
these jacks.
RGB/DVI Audio Input
Connect the monitor output from a PC to the
appropriate input port.
Euro Scart Socket (AV1/AV2)
Connect scart socket input or output from an
external device to these jacks.
RGB(PC) IN
Connect the output from a PC.
SERVICE ONLY PORT
1
2
3
4
5
6
7
8
9
10
■
This is a simplified representation of the back panel. The image shown may be somewhat different from your
set.
AC IN
AUDIO IN
(RGB/DVI)
Y
PB
PR
LR
VIDEO
COMPONENT IN
AUDIO
EJECTPCMCIA
CARD SLOT
RS-232C IN
(CONTROL & SERVICE)
SERVICE
ONLY
RGB (PC) IN
HDMI/DVI IN
AV 1
V 1
AV 2
V 2
ANTENNA IN
1
3 7 54
6
8
2
10
9
3
PREPARATION
STAND INSTALLATION
■
The image shown may be somewhat different from your set.
1
2
3
4
Carefully place the product screen side down on a
cushioned surface that will protect product and
screen from damage.
Hold the hhiinnggee bbooddyyand pull it upward. Hinge Body
Insert the ssttaanndd bbooddyyinto the product until you
hear a clicking sound.
Stand Body
Assemble the parts of the ssttaanndd bbooddyywith
ssttaanndd bbaasseeof the product.
Stand Base
4
PREPARATION
DETACHING STAND
12
3
Place the set screen side down on a cushion or
soft cloth.
Pull cover base backward while pressing button
on stand body.
Hold cover base and pull while shaking it back-
ward to separate from stand body. 4Hold the stand and pull it upward.
5Pull stand body to separate from set while
pressing both latches.
■
The image shown may be somewhat different from your set.
5
PREPARATION
BACK COVER FOR WIRE ARRANGEMENT
Connect the cables as necessary.
To connect additional equipment, see the EExxtteerrnnaall EEqquuiippmmeennttSSeettuupp section.
1
Install the CCAABBLLEE MMAANNAAGGEEMMEENNTTas shown.
2
First, press the cable management. Hold the CCAABBLLEE MMAANNAAGGEEMMEENNTTwith both hands and pull it upward.
NOTE
!
GGDo not hold the CCAABBLLEE MMAANNAAGGEEMMEENNTT when moving the product.
- If the product is dropped, you may be injured or the product may be broken.
How to remove the c ble m n gement
■
The image shown may be somewhat different from your set.
6
PREPARATION
WALL MO NT: HORIZONTAL INSTALLATION
DESKTOP PEDESTAL INSTALLATION
For proper ventilation, allow a clearance of 4 inches on each side and from the wall.
For proper ventilation, allow a clearance of 4 inches on each side and from the wall. Detailed installation
instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
4 inches
4 inches
4 inches 4 inches
4 inches
4 inches
4 inches4 inches
4 inches
7
PREPARATION
POSITIONING YO R DISPLAY
■
The image shown may be somewhat different from your set.
Adjust the position of the panel in various ways for maximum comfort.
•• TTiilltt rraannggee
LOCATION
Position your set so that no bright light or sunlight falls directly onto the screen. Care should be taken
not to expose the set to any unnecessary vibration, moisture, dust or heat. Also, ensure that the set is
placed in a position to allow a free flow of air. Do not cover the ventilation openings on the back cover.
If you intend to mount the set to a wall, attach VESA standard mounting interface (optional parts) to the
back of the set.
When you install the set using the wall mounting bracket (optional parts), attach it carefully so it will not
drop.
0
°
~ 3
°
12
°
~8
°
WWaarrnniinngg::
When adjusting the angle of the screen,do not put your
finger(s)in between the head of the monitor and the stand
body.You can hurt your finger(s).
8
PREPARATION
KENSINGTON SEC RITY SYSTEM
- The product is equipped with a Kensington Security System connector on the back panel. Connect the
Kensington Security System cable as shown below.
- For detailed installation and use of the Kensington Security System, refer to the user’s guide provided with
the Kensington Security System.
For further information, contact hhttttpp::////wwwwww..kkeennssiinnggttoonn..ccoomm, the internet homepage of the
Kensington company. Kensington sells security systems for expensive electronic equipment such as note-
book PCs and LCD projectors.
NOTE
- The Kensington Security System is an optional accessory.
NOTES
a. If the product feels cold to the touch, there may be a small “flicker” when it is turned on.
This is normal, there is nothing wrong with product.
b. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots.
However, they have no adverse effect on the monitor's performance.
c. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time.
Doing so may produce some temporary distortion effects on the screen.
9
PREPARATION
AV 3
L/MONO
R
AUDIO
VIDEO
S-VIDEO
AUDIO
VIDEO
AV 1 AV 2
ANTENNA
IN
EJECT
HDMI/DVI IN 1 HDMI IN 2
PCMCIA
CARD SLOT
RS-232C IN
AV 3
L/MONO
R
AUDIO
VIDEO
S-VIDEO
AUDIO
VIDEO
AV 1 AV 2
ANTENNA
IN
EJECT
HDMI/DVI IN 1 HDMI IN 2
PCMCIA
CARD SLOT
RS-232C IN
■For optimum picture quality, adjust antenna direction.
■An antenna cable and converter are not supplied.
■To prevent equipment damage, never plug in any power cords until you have finished connecting all equipment.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Single-family Dwellings /Houses
(Connect to wall jack for out oor antenna)
Outdoor
Antenna
(VHF, UHF)
Wall
Antenna
Socket
RF Coaxial Wire (75 ohm)
ANTENNA CONNECTION
Antenna
UHF
Signal
Amplifier
VHF
■In poor signal areas, to get better picture quality, install a signal amplifier to the antenna as shown above.
■If signal needs to be split for two TVs, use an antenna signal splitter for connection.
Autres manuels pour M198WDP
1
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels LG Moniteur
LG
LG Flatron W2253S Manuel utilisateur
LG
LG L1732P-SF Manuel utilisateur
LG
LG L1980UN Manuel utilisateur
LG
LG M2080D Manuel utilisateur
LG
LG E2750VR-SN Manuel utilisateur
LG
LG UltraGear 27GP95R Manuel utilisateur
LG
LG L1953HR Manuel utilisateur
LG
LG L1972H Manuel utilisateur
LG
LG 22EA63T-P Manuel utilisateur
LG
LG 910BK Manuel utilisateur
LG
LG 29EA73 Manuel utilisateur
LG
LG FLATRON L1717S Manuel utilisateur
LG
LG Flatron W1942S Manuel utilisateur
LG
LG Flatron W2600H Manuel utilisateur
LG
LG UltraGear 27GP83BP Manuel utilisateur
LG
LG 32MR50C Manuel utilisateur
LG
LG E2051T Manuel utilisateur
LG
LG Flatron W2086T Manuel utilisateur
LG
LG W1952S Manuel utilisateur
LG
LG L1760SR-BF Manuel utilisateur
