LG IPS235PX Manuel utilisateur

www.lg.com

OWNER’S MANUAL

LCD MONITOR

IPS225P

IPS235P

Please read this manual carefully before operating

your set and retain it for future reference.

LCD MONITOR MODEL

ENGLISH

Important Precautions

NOTE

THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV

INTRERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS

EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY

NOTE

This epuipment has been tested and found to comply with the limits for a class

B digital device,pursuant to part 15 of the FCC Rules.These limits are designed

to provide reasonable protection against harmful interference in a residential

installation.This equipment generates,uses and can radiate radio frequency

cause harmful interference to radio communications.However,there is no

guarantee that interference will not occur in a particular installation.If this

which can be determined by turning the equipment off and on,the user is

encouraged to try to correct the interference by one or more of the following

measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and the receiver.

-Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

energy and,if not installed and used in accordance with the instructions,may

equipment does cause harmful interference to radio or television reception,

TO OPERATE THE EQUIPMENT.

-Consult the dealer or an experienced radio/TV technician for help.

ENG

ENGLISH

TABLE OF CONTENTS

CONTENTS

3ASSEMBLING AND

PREPARING

3 Unpacking

4 Parts and buttons

6 Setting up the Monitor set

6 - Attaching the Stand Base

6 - Detaching the Stand Base

7 - Mounting on a table

8 - Mounting on a wall

10 USING THE MONITOR SET

10 Connecting to a PC

10 - D-SUB connection

10 - DVI-D connection

10 - HDMI connection

12 CUSTOMIZING SETTINGS

12 Accessing The Main Menus

13 Customizing Settings

13 - Menu Settings

14 -PICTURE

15 -COLOR

16 -DISPLAY

16 -VOLUME

17 -OTHERS

18 MODE Setting

19 DUAL PACKAGE Setting

20 TROUBLESHOOTING

22 SPECIFICATIONS

22 IPS225P

23 IPS235P

24 Preset Modes (Resolution)

24 Indicator

ENG

ENGLISH

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local

dealer where you purchased your product. The illustrations in this manual may differ from the actual product

and accessories.

 Do not use any unapproved accessories to ensure the safety and product life span.

 Any damages or injuries by using unapproved accessories are not covered by the warranty.

 The accessories supplied with your product may vary depending on the model.

 Product specifications or contents in this manual may be changed without prior notice due to upgrade

of product functions.



CAUTION

NOTE

Stand Base

Power Cord

CD(Owner's Manual) /

Card

D-SUB Cable

(This signal cable may be attached

to this product before shipping out.)

DVI-D Cable

(This cable is not included in all

countries.)

Display Quality Assurance Report

User must use shielded signal interface cables (D-sub 15 pin cable, DVI-D cable) with ferrite cores

(core in the connector) to maintain standard compliance for the product。

ENG

ENGLISH

ASSEMBLING AND PREPARING

Parts and buttons

Power Indicator

Lighting On: Turned on

Lighting Off: Turned off

Button (See p.13)

(Power Button)

Connection panel (See p.10)



ENG

ENGLISH

ASSEMBLING AND PREPARING

Button Description

MENU Accesses the main menus.(See p.13)

OSD LOCKED/

UNLOCKED

This function allows you to lock the current control settings, so

that they cannot be inadvertently changed.

Press and hold the MENU button for several seconds.

The message "OSD LOCKED" should appear.

You can unlock the OSD controls at any time by pushing

the MENU button for several seconds. The message "OSD

UNLOCKED" should appear.

MODE Use this button to enter USER, MOVIE,TEXT,PHOTO,sRGB menus.(See p.18)

DUAL Use this button to enter DUAL MONITOR and DUAL WEB menus.(See p.19)

AUTO When adjusting your display settings, always press the AUTO button on the MONITOR

SETUP OSD. (Only supported in Analog Mode)

The best display mode 1920 x 1080

INPUT You can choose the input signal.

• When two input signals are connected, you can select the input signal (D-SUB/DVI/

HDMI) you want.

• When only one signal is connected, it is automatically detected. The default setting is

D-SUB.

EXIT Exit the OSD(On Screen Display).

(Power Button) Turns the power on or off.

Power Indicator The power indicator stays blue if the display is running

properly (On Mode). If the display is in Sleep Mode, the power

indicator blinks blue.

ENG

ENGLISH

ASSEMBLING AND PREPARING

Setting up the Monitor set

Attaching the Stand Base

1Place the Monitor set with the screen side

down on a flat and cushioned surface.

Lay a foam mat or soft protective cloth

on the surface to protect the screen from

damage.

yThis illustration depicts the general model of

connection. Your monitor may differ from the

items shown in the picture.

yDo not carry the product upside down holding

only the stand base. The product may fall

and get damaged or injure your foot.

CAUTION

Detaching the Stand Base

1Place the Monitor set with the screen side

down on a flat and cushioned surface.

2Turn the screw to the left, and then pull out the

Stand Base from the Stand Body.

2Attach the Stand Base and then tighten the

screw to the right with a Coin.

Stand Base

ENG

ENGLISH

ASSEMBLING AND PREPARING

Mounting on a table

1Lift and tilt the Monitor set into its upright

position on a table.

Leave a 10 cm (minimum) space from the wall

for proper ventilation.

2Connect the Power Cord to a wall outlet.

3Press (Power) button on the front switch

panel to turn the power on.

10 cm

Unplug the power cord before moving the

Monitor to another location. Otherwise electric

shock may occur.

CAUTION

Swivel Range : -45˚(+/- 2°)

Tilt from +15 to -5 degrees up or down to adjust

the angle of the Monitor set to suit your view.

NOTE

Front Rear

Height Range : maximum 5.12 inches (130.0 mm)

* Please be sure to

remove the Locking

pin to adjust the height.

45˚(+/- 2°)

5- 51

130.0 mm

ENG

ENGLISH

ASSEMBLING AND PREPARING

Using the Kensington security system

The Kensington security system connector is

located at the back of the Monitor set. For more

information of installation and using, refer to the

manual supplied with the Kensington security

system or visit

http://www.kensington.com

Connect the Kensington security system cable

between the Monitor set and a table.

The Kensington security system is optional.

You can obtain it from most electronics stores.

NOTE

WARNING

When adjusting the angle of the

screen, do not put your finger(s)

in between the head of the m-

onitor and the stand body. You

can hurt your finger(s).

When adjusting the height of the

screen, do not put your finger(s)

inbetween the head of the mo-

nitor and the stand base. You

can hurt yourfinger(s).

WARNING

You do not need to replace the Locking pin after it

is removed, to adjust its height.

ERGONOMIC

It is recommended that in order to maintain an erg-

onomic and comfortable viewing position, the forw-

ard tilt angle of the monitor should not exceed 5

degrees.

ASSEMBLING AND PREPARING

Using the Pivot function

-The pivot function allows you to rotate the screen 90 degrees clockwise.

Lift the monitor to its highest height to utilize the Pivot function.

2.Landscape & Portrait : You can rotate the panel 90o clockwise.

Please be cautious and avoid contact between the monitor head and the Stand Base when rotating

the screen to access the Pivot function. If the monitor head touches the Stand Base, then the Stand

Base could crack.

Be careful with the cables when rotating the screen.

ENG

ENGLISH

Head section

Stand section

．．．．．．．

．．．．．

Table des matières

Autres manuels LG Moniteur

LG 24ML60MP Manuel utilisateur

LG Flatron L1942P Manuel utilisateur

LG 34WK650-W.BFB Manuel utilisateur

LG UltraGear 27GL83A Manuel utilisateur

LG 27HJ713C-B Manuel utilisateur

LG W2243TE Manuel utilisateur

LG L1930SQ Manuel utilisateur

LG FLATRON L1780Q Manuel utilisateur

LG UltraGear 24GQ50F Manuel utilisateur

LG 32UL750P-W Manuel utilisateur

LG W2452VQT Manuel utilisateur

LG 29EA93 Manuel utilisateur

LG M227WA Manuel utilisateur

LG KT-T320 Manuel utilisateur

LG 24QP750P Manuel utilisateur

LG Flatron L1770HQ Manuel utilisateur

LG 27GN95R-B.ATR Manuel utilisateur

LG One:Quick Flex 43HT3WN Manuel utilisateur

LG M2362D-PM Manuel utilisateur

LG 20M35PD Manuel utilisateur

LG Flatron W1943C Manuel utilisateur

LG Flatron L192WS-BN Manuel utilisateur

LG Flatron W2234S Manuel utilisateur

LG 34BP65C Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation

Sceptre

Sceptre D40 Manuel utilisateur