LG 43UN700P Manuel utilisateur

www.lg.com

Please read the safety information carefully before using the product.

IPS LED Monitor (LED Monitor) Model List

Owner's Manual

IPS LED MONITOR

(LED MONITOR*)

*LG LED Monitors are LCD Monitors with LED Backlighting.

43UN700/43UN700P

43BN70U/43BN70UP

43UN700T

ENG

ENGLISH

Contents

CONTENTS

24 TROUBLESHOOTING

26 SPECIFICATIONS

28 Factory Support Mode (Preset Mode, PC)

28 HDMI

28 DisplayPort / USB-C

29 HDMI Timing (Video)

29 Power LED

30 EXTERNAL CONTROL DEVICE

SETUP

30 - Communication Parameters

30 - Transmission

30 - OK Acknowledgement

30 - Error Acknowledgement

31 - Command Reference List

33 Beep Guide

3LICENSE

4ASSEMBLING AND PREPARING

4 Supported Drivers and Software

5 Component and Button Description

5 - How to Use the Joystick Button

6 Moving and Lifting the Monitor

7 - Using the cable holder

7 - Installing onto a table

8 - Adjusting the angle

9 - Using the Kensington lock

10 - Installing the wall mount plate

10 - Installing to a wall

12 REMOTE CONTROL

13 USING THE MONITOR

13 Connecting to a PC

13 - HDMI connection

13 - DisplayPort connection

14 - USB-C connection

14 Connecting to AV Devices

14 - HDMI connection

15 Connecting Peripherals

15 - USB Cable connection - PC

16 Connecting to External Devices

16 - Connecting Headphones

17 USER SETTINGS

17 Activating the Main Menu

17 - Main Menu Features

18 User Settings

18 - Menu Settings

ENG

ENGLISH

LICENSE

Each model has different licenses. Visit

www.lg.com

for more information on the license.

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are

trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

The following content is only applied to the monitor which is sold in Europe market and which needs to meet the ErP

Directive:

* This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no adjustment to

display.

* To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.

VESA, VESA logo, DisplayPort compliance logo and DisplayPort compliance logo for

dual-mode source devices are all registered trademarks of the Video Electronics Stan-

dards Association.

The SuperSpeed USB Trident logo is a registered trademark of USB Implementers

Forum, Inc.

ENG

ENGLISH

ASSEMBLING AND PREPARING

yAlways use genuine LG components to ensure safety and product performance.

yThe product warranty will not cover damage or injury caused by the use of unauthorized components.

yIt is recommended that use the supplied components.

yIf you use generic cables not certified by LG, the screen may not display or there may be image noises.

yIllustrations in this document represent typical procedures, so they may look different from the actual product.

yDo not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so

may damage the product.)

yApplying excessive force when tightening screws may cause damage to the monitor. Damage caused in this way

will not be covered by the product warranty.

yDo not carry the monitor upside down by just holding the base. This may cause the monitor to fall off the stand

and could result in personal injury.

yWhen lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen

may cause damage to it.

yFor wave pattern on appearance, unlike the general method of coating, it’s applied to added glittering material in

raw material.With no peeled-off appearance, it has good durability. Please use it with conﬁdence because there is

no problem in using the product at all.

yThe components may look different from those illustrated here.

yWithout prior notice, all product information and specifications contained in this manual are subject to change to

improve the performance of the product.

yTo purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer from

which you purchased the product.

yThe power cord provided may differ depending upon the region.

CAUTION

NOTE

Supported Drivers and Software

You can download and install the latest version from the LGE website (

www.lg.com

Drivers and Software Installation Priority

Monitor Driver Recommended

On Screen Control Recommended

Dual Controller Optional

ENG

ENGLISH

ASSEMBLING AND PREPARING

How to Use the Joystick Button

You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your

finger.

Basic Functions

Power on Press the joystick button once with your finger to turn on the

monitor.

Power off Press and hold the joystick button once with your finger to turn off the

monitor.

◄/►Volume

Control You can control the volume by moving the joystick button left/right.

Component and Button Description

Power LED

yOn: power is on

yOff: power is off

Joystick Button

yThe joystick button is located at the bottom of the monitor.

NOTE

yIR Receiver

ENG

ENGLISH

ASSEMBLING AND PREPARING

Moving and Lifting the Monitor

When moving or lifting the monitor, follow these in-

structions to prevent the monitor from being scratched

or damaged and to ensure safe transportation regard-

less of its shape or size.

yAs far as possible, avoid touching the monitor

screen. This may result in damage to the screen or

some of the pixels used to create images.

yIt is advisable to place the monitor in the original

box or packing material before attempting to

move it.

yBefore moving or lifting the monitor, disconnect

the power cord and all cables.

yHold the top and bottom of the monitor frame

firmly. Do not hold the screen itself.

yWhen holding the monitor, the screen should face

away from you to prevent it being scratched.

yWhen moving the monitor, avoid any strong shock

or vibrations to the product.

yWhen moving the monitor, keep it upright, never

turn the monitor on its side or tilt it sideways.

CAUTION

yIf you use the monitor panel without the stand

base, its joystick button may cause the monitor to

become unstable and fall, resulting in damage to

the monitor or human injury. In addition, this may

cause the joystick button to malfunction.

ENG

ENGLISH

ASSEMBLING AND PREPARING

Using the cable holder

Arrange the cables using the cable holder as shown in

the illustration.

Cable Holder

Installing onto a table

Lift the monitor and place it on the table in an upright

position.

Place at least 100 mm (3.94 inches) away from the

wall to ensure sufficient ventilation.

100 mm

(3.94 inches)

100 mm

(3.94 inches)

100 mm

(3.94 inches)

100 mm

(3.94 inches)

100 mm

(3.94 inches)

100 mm

(3.94 inches)

100 mm

(3.94 inches)

100 mm

(3.94 inches)

yUnplug the power cord before moving or installing

the monitor. There is risk of electric shock.

yMake sure to use the power cord that is pro-

vided in the product package and connect it to a

grounded power outlet.

yIf you need another power cord, please contact

your local dealer or the nearest retail store.

CAUTION

ENG

ENGLISH

ASSEMBLING AND PREPARING

Cautions When Connecting Power Cord

yMake sure to use the power cord that is pro-

vided in the product package and connect it to a

grounded power outlet.

yIf you need another power cord, please contact

your local dealer or the nearest retail store.

100-240 V ~

Adjusting the angle

1Place the monitor in an upright position, mounted

on the stand base.

2Adjust the angle of the screen. The angle of the

screen can be adjusted forwards or backwards for a

comfortable viewing experience.

Front SideRear Side

43UN700

43UN700P

43BN70U

43BN70UP

ENG

ENGLISH

ASSEMBLING AND PREPARING

yTo avoid injury to the fingers when adjusting the

screen, do not hold the lower part of the moni-

tor's frame as illustrated below.

WARNING

yBe careful not to touch or press the screen area

when adjusting the angle of the monitor.

Using the Kensington lock

The Kensington security system connector is located at

the back of the Monitor set.

For more information on installation and usage, refer to

the Kensington lock user manual or visit the website at

http://www.kensington.com.

Connect the Kensington security system cable between

the Monitor set and a table.

yUse of the Kensington lock is optional.

The accessories can be purchased at your local

electronics store.

NOTE

43UN700 43UN700P 43BN70U 43BN70UP

ENG

ENGLISH

ASSEMBLING AND PREPARING

Installing the wall mount plate

This monitor supports the specification of the standard

wall mount plate or compatible device.

1Place the screen face down. To protect the screen

from scratches, cover the surface with a soft cloth.

2Place the wall mount plate onto the monitor and

align it with the screw holes.

3Tighten the four screws to fix the plate to the moni-

tor using a screwdriver.

yThe wall mount plate is sold separately.

yFor more information on installation, refer to the

wall mount plate's installation guide.

yBe careful not to use excessive force when

mounting the wall mount plate, as this can dam-

age the monitor's screen.

NOTE

To install the monitor to a wall, attach a wall mounting

bracket (optional) to the back of the monitor.

Make sure that the wall mounting bracket is securely fixed

to the monitor and to the wall.

1If you use screw longer than standard, the monitor

might be damaged internally.

2If you use improper screw, the product might be dam-

aged and drop from mounted position.

In this case, LG Electronics is not responsible for it.

Installing to a wall

Install the monitor at least 100 mm (3.94 inches) away

from the wall and leave about 100 mm (3.94 inches)

of space at each side of the monitor to ensure suf-

ficient ventilation. Detailed installation instructions can

be obtained from your local retail store. Please refer to

the manual to install and set up a tilting wall mounting

bracket.

Wall Mount (A x B) 200 x 200

Standard screw M6

Number of screws 4

Wall Mount Plate

(Optional)

LSW240B

100 mm

(3.94 inches)

100 mm

(3.94 inches)

100 mm

(3.94 inches)

100 mm

(3.94 inches)

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels LG Moniteur

LG Flatron LCD 575LE Manuel utilisateur

LG UltraGear 32GR75Q Manuel utilisateur

LG Flatron L1510B Manuel utilisateur

LG E2040T-PN Guide de démarrage rapide

LG Flatron W2253S Manuel utilisateur

LG E1950T Manuel utilisateur

LG M4714C-BAG Guide de démarrage rapide

LG 23ET83V-W Manuel utilisateur

LG 27GP950 Manuel utilisateur

LG MT-60PZ90V Manuel utilisateur

LG UltraFine 4K Monitor 22MD4KA-B Manuel utilisateur

LG 27MK60MP Manuel utilisateur

LG M4225C Manuel utilisateur

LG 32SQ730S Manuel utilisateur

LG M4225CCBA Manuel utilisateur

LG MP-42PZ12 Manuel utilisateur

LG Flatron L1718S Manuel utilisateur

LG 29UM59 Manuel utilisateur

LG UltraGear 27GQ50F Manuel utilisateur

LG UltraGear 27GL63T-B Manuel utilisateur

LG StudioWorks N2200P Manuel utilisateur

LG MT- 42PZ12 Manuel utilisateur

LG UltraGear 24GN650P Manuel utilisateur

LG UltraGear 27GK65SB Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation

Sceptre

Sceptre D40 Manuel utilisateur