LG 27UD68P-B.AUB Manuel utilisateur
www.lg.com
Please read the safety information carefully before using the
product.
IPS LED Monitor (LED Monitor) Model List
Owner's Manual
IPS LED MONITOR
(LED MONITOR*)
*LG LED Monitors are LCD Monitors with LED Backlighting.
27UD68P
2
ENG
ENGLISH
Contents
CONTENTS
17 USER SETTINGS
18 Customizing settings
18 - Menu Settings
18 - -Quick Settings
19 - -PBP
20 - -Picture
23 - -General
24 - -Reset
25 TROUBLESHOOTING
27 SPECIFICATIONS
27 27UD68P
28 Factory Support Mode (Preset Mode, PC)
28 HDMI
28 DisplayPort
29 HDMI Timing (Video)
29 Power LED
3LICENSE
4ASSEMBLING AND
PREPARING
4 Product Components
5 Component and Button Description
5 - How to Use the Joystick Button
6 Input Connector
7 Moving and Lifting the Monitor
8 Installing the Monitor
8 - Assembling the stand base
10 - Using the cable holder
10 - Installing onto a table
11 - Adjusting the stand height
11 - Adjusting the angle
12 - Pivot Feature
13 - Using the Kensington lock
13 - Installing the wall mount plate
14 - Installing to a wall
15 USING THE MONITOR
15 Connecting to a PC
15 - HDMI connection
15 - DisplayPort connection
16 Connecting to AV Devices
16 - HDMI connection
16 Connecting to External Devices
16 - Connecting Headphones
3
ENG
ENGLISH
LICENSE
LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
VESA, VESA logo, DisplayPort Compliance Logo and DisplayPort
Compliance Logo for dual-mode source are all registered trademarks of the
Video Electronics Standards Association.
The following content is only applied to the monitor which is sold in Europe market and which needs to meet
the ErP Directive:
* This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no
adjustment to display.
* To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.
4
ENG
ENGLISH
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
Product Components
Please check whether all the components are included in the box before using the product. If there are
missing components, contact the retail store where you purchased the product. Note that the product and
components may look different from those shown here.
yAlways use genuine components to ensure safety and product performance.
yThe product warranty will not cover damage or injury caused by the use of counterfeit components.
yIt is recommend that use the supplied components.
yIf you use generic cables not certified by LG, the screen may not display or there may be image
noises.
yNote that the components may look different from those shown here.
yWithout prior notice, all information and specifications in this manual are subject to change to im-
prove the performance of the product.
yTo purchase optional accessories, visit an electronics store or online shopping site or contact the
retail store where you purchased the product.
CAUTION
NOTE
CD(Owner's Manual) /
Card
DisplayPort Cable
Stand Base Stand Body
HDMI Cable
( This cable is not in-
cluded in all countries. )
( Depending on the country ) ( Depending on
the country )
Power Cord AC-DC Adapter AC-DC Adapter
or
Cable Holder 4 Screws
5
ENG
ENGLISH
ASSEMBLING AND PREPARING
Component and Button Description
Power LED
yOn: power is on
yOff: power is off
Joystick Button
How to Use the Joystick Button
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with
your finger.
Basic Functions
Power on Press the joystick button once with your finger to turn on the
monitor.
Power off Press and hold the joystick button once with your finger to turn off
the monitor.
◄/►Volume
Control You can control the volume by moving the joystick button left/right.
yThe joystick button is located at the bottom of the monitor.
NOTE
6
ENG
ENGLISH
ASSEMBLING AND PREPARING
Input Connector
7
ENG
ENGLISH
ASSEMBLING AND PREPARING
Moving and Lifting the Monitor
When moving or lifting the monitor, follow these
instructions to prevent the monitor from being
scratched or damaged and to ensure safe trans-
portation regardless of its shape or size.
yAs far as possible, avoid touching the moni-
tor screen. This may result in damage to the
screen or some of the pixels used to create
images.
yIt is advisable to place the monitor in the
original box or packing material before at-
tempting to move it.
yBefore moving or lifting the monitor, discon-
nect the power cord and all cables.
yHold the top and bottom of the monitor frame
firmly. Do not hold the panel itself.
yWhen holding the monitor, the screen should
face away from you to prevent it being
scratched.
yWhen moving the monitor, avoid any strong
shock or vibrations to the product.
yWhen moving the monitor, keep it upright,
never turn the monitor on its side or tilt it
sideways.
CAUTION
yIf you use the monitor panel without the
stand base, its joystick button may cause
the monitor to become unstable and fall,
resulting in damage to the monitor or human
injury. In addition, this may cause the joystick
button to malfunction.
8
ENG
ENGLISH
ASSEMBLING AND PREPARING
2
3
4
5
yTo protect the screen from scratches, cover
the surface with a soft cloth.
CAUTION
Installing the Monitor
Assembling the stand base
1
Stand Body
Stand Body
Stand Base
or
9
ENG
ENGLISH
ASSEMBLING AND PREPARING
yIllustrations in this document represent typi-
cal procedures, so they may look different
from the actual product.
yApplying excessive force when tightening
screws may cause damage to the monitor.
Damage caused in this way will not be cov-
ered by the product warranty.
yBe careful not to hurt your hand on the edges
of the screw covers.
yDo not carry the monitor upside down by just
holding the base. This may cause the moni-
tor to fall off the stand and could result in
personal injury.
yWhen lifting or moving the monitor, do not
touch the monitor screen. The force applied
to the monitor screen may cause damage to
it.
CAUTION
yYou can disassemble the stand in the reverse
order of the assembly.
NOTE
10
ENG
ENGLISH
ASSEMBLING AND PREPARING
Using the cable holder
Cable Holder
Arrange the cables using the cable holder as
shown in the illustration.
Installing onto a table
1Lift the monitor and place it on the table in an
upright position.
Place at least 3.94 inches away from the wall
to ensure sufficient ventilation.
2Connect the power adapter to the monitor and
then plug the power cord into the wall outlet.
or
yUnplug the power cord prior to moving or
installing the monitor. There is risk of electric
shock.
CAUTION
3Press the joystick button on the bottom of the
monitor to turn on the monitor.
3.94 inches
3.94 inches
3.94 inches
3.94 inches
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels LG Moniteur
LG
LG 22MB65PM Manuel utilisateur
LG
LG W1953TP Manuel utilisateur
LG
LG 84WT70PS Manuel utilisateur
LG
LG 34WP580 Manuel utilisateur
LG
LG UltraGear 32GQ950-B Manuel utilisateur
LG
LG L197WH-PF Manuel utilisateur
LG
LG L1950B Manuel utilisateur
LG
LG W1953TV Manuel utilisateur
LG
LG 32ML60TM Manuel utilisateur
LG
LG 27MB65PY-W.AEU Manuel utilisateur
LG
LG M4630C Manuel utilisateur
LG
LG FLATRON LCD 680LE Manuel utilisateur
LG
LG L1918S-BN Manuel utilisateur
LG
LG UltraGear 32GP850-B.BEK Manuel utilisateur
LG
LG 27BR750C Manuel utilisateur
LG
LG 34WP75C-B.AAU Manuel utilisateur
LG
LG Flatron W2086T Manuel utilisateur
LG
LG UltraGear 34GL750 Manuel utilisateur
LG
LG 34UC88-B.AWP Manuel utilisateur
LG
LG IPS225P Manuel utilisateur
