LG ID2750 Manuel utilisateur

ENGLISH

P/N : MMBB0228501(1.0)

User Guide

ID2750

INDONESIA

Petunjuk

Penggunaan

ID2750

ID2750_Slim_cover 11/9/06 10:04 AM Page 1

PHONE COMPONENTS 2

ONSCREEN ICONS 4

USING THE BATTERY AND

CHARGER 5

Installing and Removing the Battery 5

Charging the Battery 6

Battery Charge Level 6

BASIC FUNCTIONS 7

Turning the Phone On and Off 7

Changing the display Language 7

Airplane Mode 8

Making a Call 8

Received Calls 9

MENU TREE 10

ENTERING & EDITING

INFORMATION 11

Entering Information Using T9 Text

Input 11

MESSAGES 13

Write 13

INTRODUCTION 15

MENU FEATURES 16

SAFETY INFORMATION 26

Charger and Adapter Safety 26

Battery Information and Care 26

General Notice 26

CONTENTS

ID2750_Slim_Eng.qxd 11/9/06 10:14 AM Page 1

The following shows key components of your mobile phone.

PHONE COMPONENTS

1. Service LED

2. Headset Jack

3. Soft Key1

4. CALL Key

5. Clear Key/Speaker Mode

6. Vibrate Mode Key

7. Microphone

8. Data Port

9. Earpiece

10. LCD Screen

11. 4 Way Navigation Key

12. Soft Key2

13. END/PWR Key

14. Alphanumeric Keypad

15. Key Pad Lock Key

16. Charger Port

ID2750_Slim_Eng.qxd 11/9/06 10:14 AM Page 2

LCD Screen Displays messages &

Indicator icons.

Soft Keys The names of the functions of

these keys appear at the bottom of the

screen

GSoft Key 1

Used to display the function setting

menu. Accepts the highlighted choice

when navigating through a menu.

GSoft Key 2

Press this key once in a menu, to go

back one level.

CALL Key Allows user to place or answer

calls, See and redial from call history.

END/PWR Key Used to turn power

On/Off and to end a call. Using this key, you

can return to the standby mode. When you

press once, when a call is received, the

phone stops ringing or vibrating depending

on the mode it is in. Press twice to reject

the call.

Alphanumeric Keypad These keys

enable you to enter numbers and

characters and choose menu items.

4 Way Navigation Key This Navigation

key allows quick access Messages

and Voice Mail notification messages.

Ring Tone, Scheduler,

Profiles.

Vibrate Mode Key In standby mode, set

the vibrate mode by pressing and holding

the key about 2 seconds.

Clear Key/Speaker Mode Press to

delete a single space or character. Press

and hold to delete entire words. You can

access "My Menu" by Clear Key. When

pressed for 2 seconds in standby mode,

speaker mode is enabled.

ID2750_Slim_Eng.qxd 11/9/06 10:14 AM Page 3

The phone screen displays several onscreen icons which appear

when the phone is powered on.

ONSCREEN ICONS

Displays the strength of the

signal received by the phone and

current signal strength is

indicated by the number of bars

displayed on the screen.

No service

The phone is not receiving a

system signal.

In use. A call is in progress.

* No icon indicates the phone is

in standby mode.

Charge level. Indicates battery

charge level.

In General mode

In Silent mode

In Alarm mode

In Vibrate mode

In Outdoor mode

Roaming mode

ID2750_Slim_Eng.qxd 11/9/06 10:14 AM Page 4

Charge the battery fully before the initial use of the phone.

The phone comes with a rechargeable battery. Keep the battery

charged while not in use in order to maximize talk and standby time

when using the phone.

Installing and Removing the Battery

GTo install, insert the battery

into the opening on the back

of the phone, and insert the

bottom of battery into groove

at the bottom of the handset.

Gently press down the cover

until the latch snaps into

place.

GTo remove, push the back

cover down. Push the tab

with one hand and lift the top

of the battery to separate.

USING THE BATTERY AND CHARGER

groove slot

ID2750_Slim_Eng.qxd 11/9/06 10:14 AM Page 5

Charging the Battery

To use the AC adapter charger provided with your phone:

1. Plug the AC adapter into the electrical outlet.

2. Insert the round end of the adapter into the AC adapter jack on the

bottom of the phone. (Make sure the battery is installed.)

GAs the phone charges, the battery icon continually displays a

progression from empty ( ) to full ( ).

It takes about three hours to fully recharge a completely rundown

battery. When fully charged, battery icon indicates charging by

twinkling.

Battery Charge Level

The battery charge level is shown at the top right of the LCD screen.

When the battery charge level becomes low, the low battery sensor

will alert you in three ways: sounding an audible tone, blinking the

battery icon outline, and displaying Recharge the battery! If the battery

charge level becomes exceedingly low, the phone will automatically

switch off and any function in progress will not be saved.

ID2750_Slim_Eng.qxd 11/9/06 10:14 AM Page 6

Turning the Phone On and Off

1. Install a charged battery pack or connect the phone to an external

power source such as the cigarette lighter charger, car kit or AC

adaptor.

2. Hold down the Key for 2 seconds until the LCD screen flashes.

NNootteeAs any other communication device, avoid any unnecessary contact with the

antenna while your phone is turned on.

Changing the display Language

1. In standby mode, press Soft Key 1 Menu.

2. Press , .

3. Set Indonesia / English with and then press Soft Key 1.

BASIC FUNCTIONS

ID2750_Slim_Eng.qxd 11/9/06 10:14 AM Page 7

Airplane Mode

When your phone is in Airplane Mode, it cannot send or receive any

calls or access online information. You may use the phone’s other

features, such as Game, Scheduler, Memo, etc. When Airplane Mode

is enabled, a message “Airplane Mode On” is displayed on the screen.

1. In standby mode, press Soft Key 1 Menu, , , .

2. Select On or Off and press Soft Key 1.

Making a Call

Every time you make a call, follow these steps:

1. Make sure that the phone is turned on. If not, hold down for 2

seconds.

2. Type the phone number and then press .

GIf the phone is locked, type the lock code.

3. To end the call press .

ID2750_Slim_Eng.qxd 11/9/06 10:14 AM Page 8

Received Calls

1. When the phone rings or vibrate (if the Vibrate Mode is enabled),

press any key (except ) or depending on the Call setting.

GWhen you press once, when a call is received, the phone

stops ringing or vibrating depending on the mode it is in. Press

twice to disconnect.

2. To end an answered call, press .

ID2750_Slim_Eng.qxd 11/9/06 10:14 AM Page 9

Autres manuels pour ID2750

Table des matières

Langues :

Manuels Téléphone portable populaires d'autres marques

Zte

Zte BLADE A520 Manuel utilisateur

Nokia

Nokia Lumia 620 Manuel utilisateur

Blackbe;rry

Blackbe;rry KEYone Manuel utilisateur

Bea-fon

Bea-fon X5 Premium Manuel utilisateur

Blackbe;rry

Blackbe;rry 8707 Series Manuel utilisateur

Blackbe;rry

Blackbe;rry Storm Mode d'emploi

LifeWatch

LifeWatch V Manuel utilisateur

Bea-fon

Bea-fon SILVER LINE SL860 Manuel utilisateur

IKI Mobile

IKI Mobile KF4.5i Manuel utilisateur

Hitech

Hitech HT-850 Manuel utilisateur

Yezz

Yezz Fashion F10 Manuel utilisateur

Point Mobile

Point Mobile PM60 Manuel utilisateur

Blackbe;rry

Blackbe;rry Q10 Manuel utilisateur

Blackbe;rry

Blackbe;rry Bold 9900 Manuel utilisateur

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Manuel utilisateur

ISAFE MOBILE

ISAFE MOBILE IS655.2 Manuel utilisateur

Blackbe;rry

Blackbe;rry CURVE 8300 - SMARTPHONE Manuel utilisateur

Blackbe;rry

Blackbe;rry 8707 - VERSION 4.1 Manuel utilisateur