LG Low Ambient Control Kit Manuel utilisateur
P/NO : MFL42540228
www.lg.com
INSTALLATION MANUAL
• Please read this installation manual completely before installing the product.
• Installation work must be performed in accordance with the national wiring
standards by authorized personnel only.
• Please retain this installation manual for future reference after reading it
thoroughly.
❈PRVC2 is available only for the Multi-V IV model
(PRVC2 can not be installed for the previous Multi-V IV model)
MODEL : PRVC2
Low Ambient Control Kit
Low Ambient Control Kit Installation manual
TABLE OF CONTENTS
■Safety Precautions................................................................................3
■Accessory Parts ....................................................................................6
■Name of each Part ................................................................................7
■Installation Method................................................................................8
1. IO Module Installation Method..........................................................8
2. Transformer, Terminal Block Installation Method............................10
■Setting and Using Method ..................................................................12
1. Wiring Diagram ..............................................................................12
2. Power Source Input .......................................................................13
3. IO Module - Low Ambient Kit Function...........................................15
4. IO Module – Other Function ...........................................................16
5. Wiring for Damper Actuator............................................................19
6. Setting of Outdoor Unit Dip Switch.................................................22
■Installation Method of Snow Hood and Air Damper ...........................23
1. One Unit with Snow Hood and Air Damper ...................................23
2. Two and Three Units with Snow Hood and Air Damper ................24
3. Unit Placement and Clearances.....................................................25
2Low Ambient Control Kit
Safety Precautions
To prevent injury to the user or other people and property damage, the following instructions
must be followed.
■Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is
classified by the following indications.
■Meanings of symbols used in this manual are as shown below.
WARNING
CAUTION
This symbol indicates the possibility of death or serious injury.
This symbol indicates the possibility of injury or damage.
Be sure not to do.
Be sure to follow the instruction.
WARNING
Installation manual 3
Safety Precautions
■Installation
Service
Center
Service
Center
Don’t touch with the hands
while the power is on.
• Cause fire, electric shock,
explosion or injury.
Product installation must
be referred to a service
center or installation shop.
• Cause fire, electric shock,
explosion or injury.
Request installation from
installation shop or service
center when reinstalling
the product.
• Cause fire, electric shock,
explosion or injury.
4Low Ambient Control Kit
Safety Precautions
Standardized
product
Do not install the product
in the place where rain can
get to the product.
• Cause product failure
Do not install the unit in
humid locations.
• Cause product failure
Do not put the product
closer to fire.
• Cause fire
Do not install in a place
that cannot withstand the
weight of the product.
• The product may get
damaged or may break.
Do not install the product
to a place that generates
oil, steam, salt, sulfuric
gas, etc.
• Cause the product’s
deformation or failure.
Use standardized Product.
• Cause product failure
Do not change or extend
power lines arbitrarily.
• Cause fire or electric shock.
Do not give a shock to the
product.
• If you give a shock to the
product, it may cause the
product’s failure.
Do not use a heater near
the power line.
• Cause fire or electric shock.
■Operation
Safety Precautions
Installation manual 5
Service
Center
STOP
Do notspill water inside of
the product.
• Cause electric shock or
breakdown.
If the product has been
inundated, you must refer to
a service center or
installation shop.
• It can cause a fire.
Children and elderly use the
product under the
guardian’s supervision.
• Cause accidents and product
failures.
Do not use for special
purpose / place such as
conserving flora and fauna,
precision instruments, art.
• Otherwise, it can cause property
damage.
Remove the power plug
when cleaning.
• Cause fire or electric shock.
Do not place heavy objects
on the power line.
• Cause fire or electric shock.
Do not disassemble, repair,
or modify the product.
• Cause fire or electric shock.
Do not touch with wet
hands.
• Cause fire or electric shock.
Accessory Parts
6Low Ambient Control Kit
Accessory Parts
IO Module
Bracket 1
Terminal Block (2EA)
Bracket 2
Screw (9EA)
Manual
Cable (3EA)
Tie (2EA)
Transformer
Clamp
Name of each Part
Installation manual 7
ڸ
ڹ
ں
ڻ
ڼڽ
ۀ
ڿ
ھ
Name of each Part
① Main connector : Power input and communication connector with Outdoor unit
② SW104 : Rotary Switch for setting Demand control step
③ Digital Output : Operating & Error status Relay output (250V, 1A)
④ SW102 : Switch for setting internal function
⑤ Digital Input : Dry contact input
⑥ Analog Input : DC0~10V Analog signal input
⑦ Analog Output : DC0~10V Analog signal output
⑧ SW103 : Reset Switch
⑨ SW101 : Dip Switch for setting operating function
Installation Method
8Low Ambient Control Kit
1. IO Module Installation Method
Installation Method
① Separate front panel from outdoor unit.
② Separate front cover of control box.
③ Assemble IO Module and bracket.
④
Connect the connection wires according to the instructions. (Please refer to Setting and Using Method)
ڸ
ڹ
ں
+
ڻ
Main board connector
CAUTION
Be sure to turn off outdoor unit power before installation.
Installation Method
Installation manual 9
⑤ Fix and fasten components and cables.
⑥ Perform the switch setting according to the instructions.
Installation Method
10 Low Ambient Control Kit
2. Transformer, Terminal Block Installation Method
①Shut off the main power of outdoor unit.
②Install the IO Module in the C/Box by using screws.
③Install the Bracket2 in the C/Box by using screws.
④Install the transformer on the Bracket2 by using screws.
⑤Install the terminal block on the Bracket2 by using screws.
⑥Connect the Main PCB(CN10) to IO Module(CN101) by using the cable assembly.
⑦Connect the blue cable of transformer to the Main PCB(JIG_N), brown cable of transformer to
the Main PCB(JIG_L).
⑧Connect the red cable of transformer to the terminal block (2Pin Yellow terminal block).
⑨Connect a power cable(DC 12V) to CN101(12V,GND) of IO Module.
⑩Connect the black cable of Damper Actuator to the terminal block and connect the cable of
IO Module(CN1_A0(GND(A-)) to the black cable of Damper Actuator.
⑪Connect the red cable of Damper Actuator to CN1_A0(A0_1(A+)) of IO Module.
⑫Set up the main function Dip S/W of IO Module.
(SW101 : L1,L2=On and L3,L4=Off / SW102 : L1,L2=Off)
⑬Set up the Dip S/W of Main Outdoor unit PCB. (Refer to page 21 for details)
⑭Turn on the main power of outdoor unit.
⑮Check the signal to CN1_A0(AO_01,GND) of IO Module and Air Damper.
+
Transformer
Clamp
Bracket 2
Terminal Block
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels LG Climatiseur
LG
LG LZ-H050GBA2 Manuel utilisateur
LG
LG LT-H242PLE0 Manuel utilisateur
LG
LG MFL67478328 Manuel utilisateur
LG
LG Multi V ARNU073TUD4 Manuel utilisateur
LG
LG 3828A30087S Manuel utilisateur
LG
LG M2400HR Manuel utilisateur
LG
LG JTNQ36GNLE5 Manuel utilisateur
LG
LG TIQ38K Manuel utilisateur
LG
LG ARNU15GSJA4 Manuel utilisateur
LG
LG LT-E2460FL Manuel utilisateur
LG
LG SX092CL NL1 Manuel utilisateur
LG
LG LW5200ER Manuel utilisateur
LG
LG LWC121CGMK0 Manuel utilisateur
LG
LG ART COOL LA150HYV2 Manuel d'installation et d'exploitation
LG
LG multi V LRNU07GSFE0 Manuel utilisateur
LG
LG ARNU073SER2 Manuel utilisateur
LG
LG TV126STQ Manuel utilisateur
LG
LG LV-B18 C Series Manuel utilisateur
LG
LG LT081CER Manuel utilisateur
LG
LG BSNQ246C8A2 Manuel utilisateur
