4.4 Pairing a Mobile Phone
- Power on the LX-S4, there will be voice prompt “Bluetooth Mode”, and the LED
light on the speaker will blink blue to enter pairing mode;
-Search for Bluetooth devices on your mobile phone. The speaker will be listed on
your mobile phone as “LX-S4”;
- It may ask for a pin, if yes, enter 0000 for the PIN;
-Your mobile phone will confirm that pairing is complete, then the LED light on the
speaker will stay on blue.
Note: This pairing operation is only required once for each mobile phone, and the
speaker will remain paired with the mobile phone and automatically connects to the
paired mobile phone again when they are within range in 30 feet.
5. Controls and Functions
5.1 Volume and Music Control
You can easily adjust the volume by Rotate the knob clockwise or anticlockwise. You
will hear a tone when the volume reaches maximum or minimum level.
Short press the knob to play and pause the music.
5.2 Bluetooth/USB/AUX IN Mode
Double click the knob quickly to switch mode between Bluetooth/USB/AUX IN.
When in music stream, press the knob to enter track control mode, you will see both
green and blue light flashing simultaneously, then you can rotate the knob clockwise
for next track, rotate the knob counter clockwise for previous track. It will exit track
control after 8 seconds, or you can press the knob to exit immediately to resume
volume control.
5.3 Aux-In Music Playback
Turn on the speaker, double click it again to switch into AUX IN mode, the LED
indicator will turn to green when it is in AUX IN mode. Plug in the external audio
source to the male 3.5mm jack to play.
5.4 USB Music Playback
Turn on the speaker, double click it again to switch into USB mode, the LED
indicator will turn to green flashing when it is in USB mode. Plug in the U-disk audio
source to the black USB port to play.
