Leviton ZW15R Manuel utilisateur

Getting Started Guide

Cat. No. ZW15R

TAMPER-RESISTANT

OUTLET

WEB VERSION

See the complete line of Z-Wave enabled dimmers, switches,

outlets, fan speed controllers and plug-ins at

leviton.com/decorasmart.

Welcome to the

Decora Smart™family of

Z-Wave®enabled devices

WEB VERSION

Welcome

The Decora Smart branded Z-Wave

enabled outlet is designed for

use with modern Z-Wave hubs.

This product can be operated in

any Z-Wave network with other

Z-Wave certiﬁed devices from other

manufacturers. Your outlet will

act as a repeater in the network to

increase the reliability of the network.

Using mesh networking technology,

Z-Wave provides quick reliable, secure

communication to a wide variety of

smart products.

The aesthetic will look at home with

your matching Decora®branded

electrical products. Tamper-resistant

outlets help protect against

electrical injuries. An integrated

vanishing status light provides simple

indications of your outlet's status as

well as assistance joining the network

and setting up your outlet.

CALL

1-800-824-3005 (USA)

1-800-405-5320 (Canada)

ONLINE

decorasmartsupport.leviton.com

CHAT

www.leviton.com/contactus

dssupport@leviton.com

We are here to help

WEB VERSION

What you need

to make it work:

RATINGS

General Use 15A - 120VAC, 50/60Hz

Magnetic 15A - 120VAC, 50/60Hz

LED/CFL 5A - 120VAC, 50/60Hz

Incandescent 1500W - 120VAC, 50/60Hz

Motor 3/4 HP - 120VAC, 50/60Hz

Operating Temp 0°C - 40°C (32°F - 104°F)

Operating Humidity 0-90% non-condensing

NETWORK

Z-Wave Plus 908.42 MHz

To install and use your Z-Wave enabled outlet.

1. A Z-Wave compatible hub.

2. A Z-Wave mesh network to join within 30 feet of

installation location.

3. An available interior wallbox with a hot, neutral,

and ground wire.

WARNING: Do not use with aluminum wire.

To ensure proper communication do not use with

metal wallplates.

4. Compatible with outlet loads up to 15A.



GROUND

LINE

NEUTRAL

WEB VERSION

Features

Controlled Outlet

Press the button or use

an app command to turn

the outlet on/o.

Status Light

Illuminates when

the outlet is o.

Tamper-Resistant

Built-in shutters help prevent

the insertion of unintended

foreign objects.

Integrated Button

Provides manual control

as well as setup and

conﬁguration.

Powered Outlet

The bottom outlet

is always on.

WEB VERSION

For additional support use the support

options in the My Leviton app or contact

technical services (page 4).

NOTE: Z-Wave is a mesh network. Ensure

your device is installed within 30 feet of

the hub or another Z-Wave enabled device.

Communication through exterior surfaces will

likely reduce transmission distances.

WARNING: TO AVOID FIRE, SHOCK OR DEATH, turn o power at the

circuit breaker.

1. Work on only one connection at a time.

2. Connect wires as shown.

NOTE: Wire sizes for Hot and Neutral must be #14-12 AWG. Strip length is

marked on the device. Tighten terminal screws to 14 in-lbs (1.6 N-m).

Installation

If your back box looks dierent,

consult an electrician

GROUND

From Branch Circuit

NEUTRAL

LINE

WEB VERSION

Test and install

1. Gently push wires into wall box. Do not overtighten

wallbox screws.

2. Install wallplate base and snap on Decora wallplate.

3. Restore power.

Congratulations!

Your Z-Wave enabled outlet

is ready to control your ﬁxture.

WEB VERSION

SmartStart

Your Decora Smart branded outlet is compatible with

SmartStart

SmartStart enabled products can be added into a Z-Wave network by

scanning the Z-Wave QR Code found on the top of the outlet or the

back of the box with a controller providing SmartStart inclusion.

No further action is required and the SmartStart product will be added

automatically within 10 minutes of being switched on and in the

network vicinity.

The QR Code and DSK is found on

the side of the outlet. If required,

the pin code is underlined on

the label.

This image is an example, please

use the code found on the

product or product packaging.

WEB VERSION

Add your outlet to a hub

Leviton Decora Smart branded Z-Wave enabled products support two

methods of inclusion. When using a Z-Wave Plus certiﬁed controller

choose Network Wide Inclusion or SmartStart. If network wide

inclusion does not discover your device, try classic inclusion.

Network Wide Inclusion to A Z-Wave Network

Modern Z-Wave Plus hubs support network wide inclusion which allows

your device to be included into the network using devices already

paired to your home automation hub.

Start with the devices closest to the hub and work your way

outward.

To enter programming mode, hold the button for 7 seconds. The status

light will turn amber. Release and the status light will blink.

Tap the button 1 time. The status light will quickly ﬂash green.

The outlet is now ready to learn into the Z-Wave network. Follow directions

for the Z-Wave controller to complete the process.

Upon successful addition to network the status light will turn o and then

ﬂash green 4 times. If it was not successfully added to the network, the

status light will ﬂash red 4 times.

Classic Inclusion To A Z-Wave Network

For older controllers Classic Inclusion is supported. Depending on the age of

the controller it will need to be 3 to 35 feet from the device when including.

To enter programming mode, hold the button for 7 seconds. The status

light will turn amber. Release and the status light will blink.

Follow the Z-Wave controller instructions to enter inclusion mode.

Tap the button one time. The status light will quickly ﬂash green.

The Z-Wave controller will conﬁrm successful inclusion to the network.

WEB VERSION

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Leviton Accessoires

Leviton

Leviton 9864-LED Manuel utilisateur

Leviton

Leviton LDC Series Manuel utilisateur

Leviton

Leviton Decora ODSIO-ID Series Manuel utilisateur

Leviton

Leviton OSWHB-I Series Manuel utilisateur

Leviton

Leviton ODD24-ID Manuel utilisateur

Leviton

Leviton ODS0D-IDx Manuel utilisateur

Leviton

Leviton ODS0D-ID-TD Manuel d'utilisation

Leviton

Leviton WSCPC Manuel utilisateur

Leviton

Leviton 279-PM Manuel utilisateur

Leviton

Leviton DECORA ODS0D-TDW Manuel utilisateur

Leviton

Leviton renu RER15 Manuel utilisateur

Leviton

Leviton Decora DI-N0X-ODS15-00A Manuel utilisateur

Leviton

Leviton Lev-Lok MT162-SCE Manuel utilisateur

Leviton

Leviton ODP10-I1I Manuel utilisateur

Leviton

Leviton WP3 Manuel utilisateur

Leviton

Leviton DOD05 Manuel utilisateur

Leviton

Leviton Decora IPP15-1LI Manuel utilisateur

Leviton

Leviton OFDUZ Manuel utilisateur

Leviton

Leviton WSWDR-H9W Manuel utilisateur

Leviton

Leviton ODC15-IDW Manuel utilisateur

Leviton

Leviton Decora ODS10-IDx Manuel utilisateur

Leviton

Leviton Acenti AC315 Manuel utilisateur

Leviton

Leviton ODS10-ID Series Manuel utilisateur

Leviton

Leviton GreenMax OSR05-IC Series Manuel utilisateur

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur