LevelOne FCS-6020 Manuel utilisateur
FCS-6020 User Manual
1/56
FCS-6020
PT Network Camera, 2-Megapixel,
Say & Night, PoE 802.3af, IR LEDs,
User Manual
Version 1.0
FCS-6020 User Manual
2/56
Table of Contents
Overview...............................................................................................................3
Package Contents.................................................................................................4
Hardware Description ...........................................................................................5
Hardware Installation............................................................................................7
Connect to the Network Camera.........................................................................10
Install the IP Finder program........................................................................10
Bonjour program..........................................................................................17
ip-discovery.com(Free DDNS service).........................................................18
Initial Access to the Network Camera.................................................................19
Primary user’s capability .....................................................................................20
Main Screen with Camera View...................................................................20
Client Setting ...............................................................................................23
Definitions in Configuration.................................................................................25
System parameters......................................................................................25
User Management.......................................................................................27
Network .......................................................................................................29
Access list....................................................................................................33
Audio and Video setting...............................................................................34
Video record ................................................................................................36
Stream.........................................................................................................38
Camera control............................................................................................40
Application...................................................................................................42
Storage........................................................................................................45
Syslog..........................................................................................................46
Status and Parameters ................................................................................47
Maintenance................................................................................................48
Appendix.............................................................................................................50
A. Troubleshooting & Frequently Asked Questions......................................50
B. Technical specifications...........................................................................55
Default Settings
IP Address
DHCP
Username
root
Password
FCS-6020 User Manual
3/56
Overview
The LevelOne FCS-6020 is a quality yet cost-effective surveillance solution for
the home and office. It is designed for easy and flexible installation, supporting
two power options (12 VDC/PoE) and the motorized Pan and Tilt provides a
viewing angle of ±355°pan and ±135°tilt. Equipped with a 2-Megapixel sensor
and built-in IR cut filter/IR illuminator LEDs, the camera provides high resolution
quality and sharp sensitivity –ideal for security applications both day and night.
The FCS-6020 is equipped with many advanced features such as Level1DNS™
Service, DI/DO for external alarm and sensor, a SD/SDHC card slot and USB
interface for local storage, built-in microphone and external speaker for 2-way
audio communications. Moreover, users can also set up 16 motion-detection
regions with the camera, each with adjustable size and sensitivity. When motion
is detected at the specified regions, the system can send an E-mail alert or send
captured images via FTP upload to a designated storage server. The FCS-6020
is indisputably the top choice for reliable and high performance surveillance.
Law in your country may prohibit the use of surveillance devices. The Network
Camera is not only a high-performance web-ready camera but also can be part
of a flexible surveillance system. It is the user’s responsibility to ensure that the
operation of such devices is legal before installing this unit for its intended use.
Minimum System Requirement
Personal Computer
·CPU: Intel® Celeron® Dual-Core @2.70GHz or above
·Memory Size: 2 GB or above recommended
·VGA card resolution: 1024 x 768 or above
Operating System
· Windows XP/ Windows 7
Web Browser
· Microsoft Internet Explorer 6.0 or later
· Firefox
· Chrome
Network Card
· 10Base-T (10 Mbps) or 100Base-TX (100 Mbps) operation
Viewer
· ActiveX control plug-in for Microsoft IE
FCS-6020 User Manual
4/56
Package Contents
Network Camera
Power Adapter
Camera Stand
LAN Cable
Quick Installation Guide
CD Manual / Utility
If any of the above items are missing, please contact your dealer immediately.
Note:Using a power supply with a different voltage than the one included with
the Network Camera may cause damage and void the warranty for this product.
FCS-6020 User Manual
5/56
Hardware Description
1. Light Sensor
Automatically detects lighting condition to turn IR LEDs on/off.
2. Infrared LEDs
There are twelve Infrared (IR) LEDs in front of camera for night vision
purpose. The IR LEDs will auto or manual turn on when the camera is in the
dark environment.
3. Built-in Microphone
The camera has a built-in internal microphone. This microphone is hidden in
the pinhole located on the head of camera.
4. Front LEDs
Red LED indicates power, red LED will turn on always after plug-in power.
Green LED indicates networking, green LED will blink every second after
getting IP address.
Upon powering up, two of front LEDs will become lighted then the camera will
do self-rotation. During the self-rotation, red LED will be on and the network
camera is standing by for getting an IP address.
5. Ethernet Port
FCS-6020 User Manual
6/56
Beside the DC power Jack, the LAN socket is an RJ-45 connector for
connections to 10Base-T or 100Base-TX Fast Ethernet cabling. Please use a
Cat 5 ―straight through‖ cable to connect the Network Camera to an Ethernet
network switch or hub.
6. General I/O Terminal Black
Used for connecting to external input/output devices like alarms or sensors.
7. Line Output
The Network Camera supports two way audio communication so that
operators can transmit and receive audio simultaneously. By using the
Network Camera’s built-in or external microphone and an external speaker,
you can communicate with people around the Network Camera.
8. SD/SDHC Card Slot
The SD/SDHC card slot offers a convenient and portable storage
(snapshots and video clips) option to prevent data loss in case of network
disconnection.
9. Microphone/Line In
The Network Camera supports two way audio communication so that
operators can transmit and receive audio simultaneously. By using the
Network Camera’s built-in or external microphone and an external speaker,
you can communicate with people around the Network Camera.
10.DC Power Jack
The input power is 12VDC. Note that supply the power to the Network
Camera with standard power adapter included in package. Otherwise, the
improper power adapter may damage the unit and result in danger.
11.USB Port
The USB slot offers a convenient and portable storage (snapshots and video
clips) option to prevent data loss in case of network disconnection.
FCS-6020 User Manual
7/56
Hardware Installation
1. Attach the Network Camera with the included stand
2. Place the Camera on the table or fix it onto ceiling or wall
Use screws to fix the Network Camera onto the ceiling or wall. You could also
place the Network Camera on the table directly.
3. Plug a RJ-45 Ethernet cable into the Network Camera
Connect an Ethernet cable to the LAN socket located on the rear of network
camera and connect it to a network.
Ethernet
Cable Socket
FCS-6020 User Manual
8/56
4. Connect the external power supply to the network camera
Connect the attached power adapter to the DC power jack of the Network
Camera. Note: Use the power adapter, 12VDC, included in the package and
connect it to wall outlet for AC power.
Once you have installed the Network Camera well and powered on, the camera
will do self-rotation and then the red LED will turn on and green LED will flash
every second. It means that the system is booting
5. General I/O Terminal Block
If you have external devices such as sensors and alarms, connect it to the I/O
terminal block.
Power
Socket
1: Power
2: Digital output
3. Digital input
4. Ground
FCS-6020 User Manual
9/56
FCS-6020 User Manual
10/56
Connect to the Network Camera
Install the IP Finder program
When you installed your Network camera on your LAN environment, you may install ―IP
Finder‖ to discover Network camera’s IP address. The Administrator must place the
product software CD into the CD-ROM drive of the PC running in Microsoft Windows. An
auto-run program will pop up (If the program is not on auto-run, go to the root directory
of the software CD and click on ―autorun.exe‖).
Click on ―Software Utility‖ item, after the window contents changed, click on ―Install IP
Finder‖ to run ―IP Finder‖ program.
Table des matières
Autres manuels LevelOne Système de sécurité
Manuels Système de sécurité populaires d'autres marques
EDM
EDM Solution 6+6 Wireless-AE Manuel utilisateur
Highway Safety Group
Highway Safety Group EA401 Manuel utilisateur
Siren
Siren LED GSM Manuel utilisateur
Detection Systems
Detection Systems 7090i Instructions de montage
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manuel utilisateur
Siemens
Siemens FDM273 Manuel utilisateur