LevelOne FCS-5053 Manuel utilisateur
Fixed Network Camera
Hardware User Manual
FCS-5053
Ver. 2013/12/24
Hardware Manual
2
Table of Contents
Precautions 3
Safety Instructions..................................................................................... 5
Introduction 6
List of Models.............................................................................................. 6
Package Contents...................................................................................... 6
Physical Description................................................................................. 7
Installation Procedures 8
Mount the Camera...................................................................................... 8
Using the Bundled Bracket.............................................................8
Basic Connections....................................................................................11
Connecting a Single Camera....................................................... 11
Connecting Multiple Cameras......................................................12
Accessing the Camera 13
Configure the IP Addresses .................................................................. 13
Using DHCP Server to Assign IP Addresses................................13
Using the Default Camera IPAddress..........................................15
Access the Camera.................................................................................. 17
Other Adjustments and Accessories 20
Adjust Camera Focus ............................................................................. 20
Attach the Sunshield............................................................................... 22
Reset the Camera..................................................................................... 23
Hardware Manual
3
Precautions
Read these instructions
You should read all the safety and operating instructions before using this product.
Heed all warnings
You must adhere to all the warnings on the product and in the instruction manual. Failure to
follow the safety instruction given may directly endanger people, cause damage to the system
or to other equipment.
Servicing
Do not attempt to service this video device yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
Trademarks
All names used in this manual are probably registered trademarks of respective companies.
Liability
Every reasonable care has been taken during the writing of this manual. Please inform your
local office if you find any inaccuracies or omissions. We cannot be held responsible for any
typographical or technical errors and reserve the right to make changes to the product and
manuals without prior notice.
Hardware Manual
4
Federal Communications Commission Statement
This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to the equipment that are not expressly approved by the
responsible party for compliance could void the user’s authority to operate the equipment.
European Community Compliance Statement
This product has been tested and found to comply with the limits for Class B
Information Technology Equipment according to European Standard EN 55022
and EN 55024. In a domestic environment, this product may cause radio interference in which
cause the user may be required to take adequate measures.
Hardware Manual
5
Safety Instructions
Cleaning
Disconnect this video product from the power supply before cleaning.
Attachments
Do not use attachments not recommended by the video product manufacturer as they may
cause hazards.
Water and Moisture
Do not use this video product near water, for example, near a bathtub, washbowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming pool and the like.
Don’t use accessories not recommended by the manufacturer
Only install this device in a dry place protected from weather
Servicing
Do not attempt to service this video product yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
Damage Requiring service
Disconnect this video product from the power supply immediately and refer servicing to
qualified service personnel under the following conditions.
1) When the power-supply cord or plug is damaged
2) If liquid has been spilled, or objects have fallen into the video product.
3) If the video product has been directly exposed to rain or water.
4) If the video product does not operate normally by following the operating Instructions in
this manual. Adjust only those controls that are covered by the instruction manual, as an
improper adjustment of other controls may result in damage, and will often require
extensive work by a qualified technician to restore the video product to its normal
operation.
Safety Check
Upon completion of any service or repairs to this video product, ask the service technician to
perform safety checks to determine if the video product is in proper operating condition.
Hardware Manual
6
Introduction
List of Models
This hardware manual contains the following models:
FCS-5053
Fixed Network Camera, 3-Megapixel, Outdoor, PoE 802.3af,
Day & Night, IR LEDs
Package Contents
Camera
Sunshield
Lens Focus Tuner
Hexagon Screw Kit
Sunshield Screw Kit
Quick Installation Guide
Bracket
Bracket Plate
Hardware Manual
7
Physical Description
Main View
Back Interior View
1) Ethernet Port
Connects to the network and power source. See Basic Connections on page 11 for more
instructions.
2) Reset Button
Press and hold the Reset button for 5 seconds to reset the camera to its default factory
settings. See Reset the Camera on page 23 for more instructions.
1
12
Hardware Manual
8
Installation Procedures
Mount the Camera
Using the Bundled Bracket
1. Mark the location of the three (3) screw holes using the bracket plate included in the
package.
NOTE: Depending on the surface where you will install the camera, it may be necessary to
drill the holes and use the supplied screw torx
2. Attach the plate to the surface using the three (3) supplied screws.
3. Attach the bracket to the plate.
Hardware Manual
9
4. Depending on how you want to install the camera, attach the camera to the bracket
through one of the three (3) holes below:
If the camera will be installed indoors and the use of sunshield is not necessary, you may
also use one of the two (2) holes on top of the camera to mount the bracket to the ceiling.
First, remove the pre-installed screw nut using a wrench (not included in the package).
Below is an example of this type of installation.
5. Adjust the camera viewing angle and tighten the knob to fix the camera position.
Depending on the camera angle, you may also need to tighten the two (2) screws using
the star wrench (included in the package) to fix the camera position.
or
Hardware Manual
10
6. Connect an Ethernet cable from the network side to the Ethernet port of the camera to
complete the installation. See Basic Connections on page 11 for more information.
NOTES on using Ethernet cables: For outdoor installations, it is recommended to use
exterior-grade Ethernet cables (CAT5/CAT5e/CAT6); ordinary Ethernet cables are only
designed for indoor use and may deteriorate quickly when exposed to outdoor elements.
Exterior-grade Ethernet cables are waterproof and do not require a conduit.
CAUTION: If the camera will be installed outdoors, be sure to waterproof the cable
connection by enclosing it inside a junction box or wrap it using a moisture-sealant tape,
such as 3M PRODUCTS Core Series 4-1000 (not included in the package) or equivalent.
See example below.
Camera Side
Network Side
Table des matières
Autres manuels LevelOne Caméra de sécurité
LevelOne
LevelOne FCS-1050 Manuel utilisateur
LevelOne
LevelOne FCS-0051 Instructions d'utilisation
LevelOne
LevelOne FCS-0031 Manuel utilisateur
LevelOne
LevelOne FCS-5044 Manuel utilisateur
LevelOne
LevelOne FCS-1150 Manuel utilisateur
LevelOne
LevelOne FCS-3054 Instructions d'utilisation
LevelOne
LevelOne FCS-5041 Manuel utilisateur
LevelOne
LevelOne FCS-1030 Manuel utilisateur
LevelOne
LevelOne CamCon WCS-2030 Guide de l'utilisateur
LevelOne
LevelOne CamCon FCS-4020 Manuel utilisateur
LevelOne
LevelOne FCS-5051 Manuel utilisateur
LevelOne
LevelOne FCS-5042 Manuel utilisateur
LevelOne
LevelOne FCS-3071 Manuel utilisateur
LevelOne
LevelOne WCS-0050 Manuel utilisateur
LevelOne
LevelOne FCS-1050 Manuel utilisateur
LevelOne
LevelOne FCS-0010 Manuel utilisateur
LevelOne
LevelOne FCS-5041 Manuel utilisateur
LevelOne
LevelOne FCS-1131 Manuel utilisateur
LevelOne
LevelOne FCS-3062 Manuel utilisateur
LevelOne
LevelOne FCS-4041 Manuel utilisateur
