LevelOne WNC-0302USB Manuel utilisateur
LevelOne
WWNNCC--00330022UUSSBB
110088MMbbppssUUSSBBAAddaapptteerr
User Manual
V1.0-0506
CONTENTS
1INTRODUCTION............................................................................. 1
1.1 FEATURES .................................................................................................... 1
1.2 SPECIFICATIONS............................................................................................ 1
1.3 PACKAGE CONTENTS..................................................................................... 2
2INSTALLATION PROCEDURE ..................................................... 3
3CONFIGURATION UTILITY ....................................................... 12
3.1 WIRELESS CONNECTION STATUS.................................................................. 12
3.2 PROFILE MANAGEMENT............................................................................... 12
3.3 DIAGNOSTICS ............................................................................................. 14
3.4 SECURITY................................................................................................... 14
3.4.1 WPA Security Settings ............................................................................................ 17
EAP-TLS Security...........................................................................16
EAP-TTLS Security.........................................................................17
PEAP (EAP-GTC) Security..............................................................18
PEAP (EAP-MSCHAP V2) Security..................................................19
LEAP Security................................................................................21
3.4.2 Using WPA Passphrase Security ............................................................................. 23
3.4.3 Pre-Shared Encryption Keys .................................................................................... 24
OVERWRITING AN EXISTING STATIC WEP KEY ..................................................... 26
DISABLING STATIC WEP...................................................................................... 26
4TROUBLESHOOTING .................................................................. 27
1
1 Introduction
Thank you for purchasing LevelOne WNC-0302USB 108Mbps USB Adapter. This USB
Adapter is designed to comply with IEEE 802.11g Wireless LAN standard and easy to carry
with the Mini size. It is suitable for any Laptop or Desktop computers.
This adapter supports 64/128/152-bit WEP data encryption that protects your wireless
network from eavesdropping. It also supports WPA (Wi-Fi Protected Access) feature that
combines IEEE 802.1x and TKIP (Temporal Key Integrity Protocol) technologies. Client
users are required to authorize before accessing to APs or AP Routers, and the data
transmitted in the network is encrypted/decrypted by a dynamically changed secret key.
It supports the Super G mode feature to enhance the data rate to reach to 108Mbps, it can
enhance the data rate when it connect with Super G product.
This adapter is with the versatile features; it is the best solution for you to build your
wireless network.
1.1 Features
•Complies with the IEEE 802.11b and IEEE 802.11g 2.4GHz standards.
•Up to 54Mbps high data transfer rate. ( 108M : Super G mode enabled)
•Support 64/128/152-bit WEP, WPA, IEEE 802.1x high level of security.
•Complies with IEEE 802.11d country roaming standard.
•Support the most popular operating system: Windows 98SE/Me/2000/XP.
•Supports USB 2.0/1.1/1.0 interface.
•Portable and mini-size design.
•Suitable for Any Notebook or Desktop PC.
1.2 Specifications
•Standard: IEEE 802.11g/b
•Bus Type: USB 2.0 Type A
•Frequency Band: 2.4000~2.4835GHz (Industrial Scientific Medical Band)
•Modulation: OFDM with BPSK, QPSK, 16QAM, 64QAM (11g)
BPSK, QPSK, CCK (11b)
•Data Rate: 54/48/36/24/18/12/11/9/6/5.5/2/1Mbps auto fallback (108Mbps: Super G enabled)
•Security: 64/128/152-bit WEP Data Encryption, WPA , IEEE 802.1x
•Antenna: Internal Antenna
•Drivers: Windows 98SE/Me/2000/XP
•LED: Link/Activity
•Transmit Power: 16dBm (Typical)
2
•Dimension: 9(H) x 27(W) x 87(D)
•Temperature: 32~131°F (0 ~55°C)
•Humidity: 0-95% (NonCondensing)
•Certification: FCC, CE
1.3 Package Contents
Before you begin the installation, please check the items of your package. The package
should include the following items:
•LevelOne WNC-0302USB 108Mbps USB Adapter
•LevelOne USB 2.0 Extension Cable (100 cm)
•LevelOne Quick Installation Guide
•LevelOne CD (Driver/Utility/Manual)
If any of the above items is missing, contact your supplier as soon as possible.
3
2 Installation Procedure
Before you proceed with the installation, please read the following chapter!
Note1: For Windows 98SE please make sure your copy of windows is fully updated with the
latest hotfixes by going to http://windowsupdate.microsoft.com
Note2: For Windows XP or Windows XP SP1, please update your windows with the following
hotfix http://support.microsoft.com/?scid=kb%3Ben-us%3B822603&x=10&y=13
if your copy of Windows XP has been updated with Service Pack 2 (SP2), you do not
need to apply this hotfix.
Note3: The following installation was operated in Windows XP. (Procedures are similar for
Windows 98SE/ME/2000)
Note4: If you have installed the Wireless PC Card driver & utility before, please uninstall the
old version first.
This chapter describes using the LevelOne installer to install the LevelOne USB
wireless network adapter driver.
Installation
Important Note: (For Windows 2K/XP) Please ensure that the USB
adapter is plugged into the computer before starting the installation
program!!! (For Windows 98SE, do not plug in the device before starting
the installation program)!!!
To install the LCU and USB device driver:
1. For Windows 2k/XP insert the USB device into the computer, (for windows
98SE do not insert the device), and insert the installation CD.
2. Open the InstallShield Wizard (setup2k.exe for Windows XP/2000 and
setup98.exe for Windows98SE/Me).
4
3. LevelOne Client Installation installer opens. Click Next.
4. LevelOne license agreement window appears. Read and accept the agreement
to continue. Click Next.
5. The Installation Program window appears with three setup options.
To install the client utilities and driver, select the appropriate installation type
(see Table (2-1) and click Next.
Table 2-1. Installer Installation Selections
Radio Button Description
Install Client
Utilities and
Driver
(recommended)
Installs the driver and client utilities. This is the recommends
option.
Install Driver Only Installs only the driver without installing the client utilities.
5
Make Driver
Installation
Diskette(s)
Creates driver installation diskettes.
6. A prompt appears warning that the install requires the system to be rebooted
at the end of the installation process. Click Yes to continue.
7. Choose the setup directory. The default is C:\Program Files \LevelOne
Click Next.
8. Choose the program folder for the start menu. The default is LevelOne Click
Next.
9. For a windows XP installation, the next screen defines the Windows Zero
Configuration. Windows XP Zero Configuration provides functionality to
automatically try to connect the station to available wireless networks. For
complete information on Windows Zero Configuration, see the Microsoft web
site.
10.In this installation, select the LevelOne Client Utility and Supplicant.
Click Next. The installer automatically installs the driver.
11.Make sure that the USB device is inserted. If it is not, insert it, then cancel
the found New Hardware Wizard if it appears. Proceed with the installation.
Click OK.
12.Windows may display a Windows Logo error for the USB bootloader. Click
Continue Anyway.
6
The installer continues installation.
13.Windows may display a Windows Logo error for the WLAN driver. Click Click
Continue Anyway.
The installer continues installation.
14.Click OK at the prompt to reboot and complete the installation.
7
Installing LevelOne WNC-0302USB Wireless
Network Adapter
To install the USB driver and LevelOne Client Utility, see “To install the ACU and
USB device driver:” on page 2-1.
To install the USB Device Driver separately:
1. Insert the USB device into the computer: The Found New Hardware Wizard
opens. Choose advanced installation and click Next.
2. Choose Search for driver in these locations. The driver is located in the
Ndis5x\2KXP directory. (For Windows 98SE/ME computers, the driver is located
in the Ndis5x\98ME).
8
3. Windows may display a Windows Logo error for the bootloader. Click Continue
Anyway. The installer will continue with the installation.
4. Click Finish to close the Found New Hardware Wizard and complete installation
of the USB device bootloader.
5. The Found New Hardware Wizard opens to install software for the USB device.
Click Next to continue.
Table des matières
Autres manuels LevelOne Adaptateur
LevelOne
LevelOne GNC-0102T Manuel utilisateur
LevelOne
LevelOne LevelOne WUA-0604 Manuel utilisateur
LevelOne
LevelOne PLI-3110 Manuel utilisateur
LevelOne
LevelOne USB-0301 Manuel utilisateur
LevelOne
LevelOne WPC-0601 Manuel utilisateur
LevelOne
LevelOne WUA-0603 Manuel utilisateur
LevelOne
LevelOne WUA-0616 Manuel utilisateur
LevelOne
LevelOne WF-2111 Manuel utilisateur
LevelOne
LevelOne WPC-0600 Manuel utilisateur
LevelOne
LevelOne WUA-1610 Manuel utilisateur
LevelOne
LevelOne FNC-0107TX Manuel utilisateur
LevelOne
LevelOne USB-0502 Manuel utilisateur
LevelOne
LevelOne WUA-1810 Manuel utilisateur
LevelOne
LevelOne WUA-5600 Manuel utilisateur
LevelOne
LevelOne WUA-1610 Manuel utilisateur
LevelOne
LevelOne Original instructions Manuel utilisateur
LevelOne
LevelOne USB-0401 Manuel utilisateur
LevelOne
LevelOne WPC-0100 Manuel utilisateur
LevelOne
LevelOne USB-0301 Manuel utilisateur
LevelOne
LevelOne WPC-0300 Manuel utilisateur
