Leupold RCX Trail Camera System Manuel utilisateur

USER MANUAL

2 3

Introduction

The RCX Trail Camera System is

designed to support the use of many

cameras and a single controller. The

camera system is simple, high quality,

and durable so you can place many

cameras in the ﬁeld, and quickly and

easily access them to change setups,

use Real Time Video AlignmentTM and

to download images. The system works

by the camera capturing images and

storing them on an SD card that you

install. The controller also takes an SD

card up to 32 GB.

When you connect the controller to the

camera with the USB cable, you can

download images from the camera to

the controller with just a couple of quick

menu selections. You are then able to

view the images right there in the ﬁeld

and make any changes to the setup you

want. The controller also allows you to

view photos from other brand trail

cameras when the SD cards are

inserted. The camera can be aligned

using Real Time Video Alignment™ that

permits you to see what the camera

sees. Settings can also be changed to

get more or less images by selecting one

of 4 preset modes, or you may access

the powerful custom menu for settings

such as multipicture, event delay, time

lapse, etc. See “Custom Camera Setup”

on page 18 for more information.

Contents

Introduction.......................................................................................................... 3

Things you need to get started ............................................................................4

Controller Setup ...................................................................................................5

Camera Setup..................................................................................................... 10

Battery Guideline ............................................................................................... 11

Camera Operation Setup.................................................................................... 12

Camera Setup with Preset Modes...................................................................... 13

DST (Dual Sensor Technology) ........................................................................... 14

Camera Mounting .............................................................................................. 15

Custom Camera Setup........................................................................................ 18

Using an External Power Source ........................................................................ 21

Downloading Images .........................................................................................22

Troubleshooting ................................................................................................. 24

4 5

Things you need to get started

1. Camera

2. Controller

(included in RCX Kit. Li-Ion

battery included)

3. 8 AA Batteries

(Leupold strongly

recommends Energizer®Ultimate Lithium

AA batteries, especially for use in below

freezing temperatures.)*

4. 2 SD or SDHC cards: one for the

controller, one for the camera, up to

32GB capacity.

Accessories:

5. Mounting strap

(comes with camera

or kit)

6. USB Cable

(included with kits and with

controllers)

7. Stand offs

(Included with cameras and

kits. These are used to solidly position

the camera on uneven surfaces)

Optional:

RCX Lockdown Security Plate

(Comes installed on RCX-2 only; for use with

Master Lock® Python™ cable or for mounting

with a single nail. Available separately for

RCX-1.)

*Alkaline batteries can leak and damage

the camera if left unattended for extended

periods, especially during below freezing

temperatures. The RCX Trail Camera Warranty

does not cover damage from battery leakage.

Controller Set-Up

Lanyard Hole

Battery Door

Screw

Mini USB Port Cover Power Button

SD Card Slot Door3” TFT

(Thin Film Transistor)

Screen

6 7

A controller must only be set once, but

is necessary to set the date and time,

and to access the features of your RCX

Camera. Every time a new camera is

set up, the time synchronizes with the

controller as soon as it is plugged in

with the USB cable.

The ﬁrst time the controller is powered

up, the ﬁrst screen presented is the

“Time/Date” screen. To access this

screen again later, you will ﬁnd this

selection in the “Setup Controller”

menu. This screen will again be the ﬁrst

screen presented any time you allow

the battery to go dead for more than

24 hours.

The Lithium Ion battery is already

installed in the controller. The

controller battery should be charged

for a minimum of 2 hours before use;

however, it is preferable to charge it at

least 16 hours to ensure long hours of

use and to prevent short battery life.

To charge the RCX Controller Battery,

plug the appropriate end of the USB

cable into the controller, then plug the

other end into a computer, the wall

charger or the car charger provided.

Before going into the ﬁeld, verify that

the controller is properly charged.

Navigate through the controller

menus by arrowing to the desired

selection.

On menu items with to the right

of the text, press the right arrow to

access the next level down in the

menu .

Press to select a menu choice.

Delete and zoom are used

only when viewing images on the

SD card.

Use to back out one menu level.

8 9

Brightness: The display brightness of

the controller can be adjusted. This is

recommended when lighting conditions

change dramatically.

Time/Date: Time is in 24-hour time

only. The default date format is YYYY/

DD/MM but can be changed to other

formats.

Temp Unit: Switch between °F or °C.

Hemisphere: Set the appropriate hemisphere. The United States and Canada are

in the Northern Hemisphere. Australia, New Zealand and South Africa are in the

Southern Hemisphere.. This makes the orientation of the moon phase images correct

for your location.

Language: The controller menus can be displayed in any of the following

languages: English, German, Finnish, French, Italian, Russian, Spanish or Swedish.

6HWXS&RQWUROOHU

%ULJKWQHVV

7LPH'DWH

+HPLVSKHUH

7HPS8QLW

&RQWUROOHU9HUVLRQ 

/DQJXDJH (QJOLVK

)RUPDW6'&DUG





1RUWKHUQ

USB Port Cover

1/4-20 Tripod

Stud Mount

BOTTOM ACCESS

DOOR OPEN

BOTTOM ACCESS

DOOR CLOSED

USB Port

SD Card Slot

Battery Pack

Latch

Cover Retaining

Screw

Battery Pack

12V Jack Cover

12V Jack

Power Switch

10 11

1. Install an SD card. An SD card from

another device may already contain

ﬁles that will reduce the number of

photos you can take. To optimize the

operation of the camera’s SD card,

format it using the controller. This

can be done in the controller setup

menu and by selecting “Format SD

Card” from the bottom of the menu.

This will erase all SD Card contents.

Once the SD card is formatted,

insert it into the camera.

2. Open the access door and remove

the AA battery cartridge.

3. Insert 8 batteries with the negative

(ﬂat) end against the contact spring.

4. Insert the loaded battery cartridge

into the camera with the contact

side going in ﬁrst until the catch

snaps into place. Be sure to close

the bottom door securely after all

setup is complete to ensure good

contact pressure.

5. Turn power on (“I” position). The

camera won’t take pictures for 30

seconds after powered on or with

the USB cable still connected to

both the controller and the camera.

6. Connect the controller to the

camera with the USB cable. Allow

several seconds for the controller

to recognize the camera. When

properly connected, the controller

will show a camera status box at the

bottom of the screen.

• Ideally, use only Energizer®Ultimate

Lithium AA batteries or the RCX

Rechargeable Battery Pack,

especially for cold weather use and

night time photos & video. Alkaline

batteries are adversely affected by

freezing temperatures, and high

power drain applications, regardless

of what device they are used in.

• Never mix battery types (Alkaline,

Ni-MH, Lithium) or mAh rating.

• Never try to recharge a battery that

is not labeled as rechargeable.

• Use only the recommended charger

for rechargeable batteries.

• Always replace all batteries at the

same time.

• Do not attempt to use only 4

batteries. 8 batteries are required

for the RCX cameras to function.

• Follow the battery manufacturer’s

recommendations for storage,

handling and disposal.

Camera Setup

;;;;;;;; 

3RZHU6DYHU0RGH

5&;&DPHUD,QIR %UDG

6HWXS&DPHUD

Camera Status

Battery Guideline

12 13

If you are using multiple RCX Cameras,

it is recommended to give each camera

a unique name the ﬁrst time it is set

up. This will name the folder where the

images are stored (which includes the

camera name) for easy sorting after

downloading from multiple cameras.

Naming camera

1. With the camera powered on,

connect the controller to the camera

with the USB cable.

2. Select “Setup Camera”from the

main menu. Press

3. Press until “Custom Setting” is

highlighted. Press .

4. Press twice to move to “Page 2”,

then Press to move to the menu.

Press to select “Camera Name”,

then press .

5. Select characters from the keyboard

by using , and use

to input the character. The

name must be between 3 and

10 characters long.

(Be sure the

ﬁrst 3 characters are unique between

cameras to ensure all folders are easy to

differentiate.)

6. Select “Save”and press .

7. Press . As you exit the custom

settings, an

“Update camera?”

alert window appears. Press to

upload the changes you made. This

will be conﬁrmed with the message

“Camera Setup Complete”

Camera Operation Setup Camera Setup with Preset Modes

Automatically

Selected Settings

with Preset Modes

*DST only available

with RCX-2

Image Quality

Multi-picture

Event delay

(time between photos)

RCX-2 Sensor

(RCX-1 is only 45°)

RCX-2 Flash

(RCX-1 is 36 LED only)

Sensitivity

Best Picture Mode RCX- 1: 8MP

RCX-2: 10MP

OFF OFF DST 48 LED Auto

Most Picture Mode 3MP 3 photos OFF DST 48 LED Super High

Power Saver Mode

(Day/Night)

3MP OFF 5 min DST 36 LED Auto

Normal Video Mode 640x480,

30fps, 5 sec

OFF 5 min DST 36 LED Auto

1. Go to Camera Setup

2. Press .

3. Select from the 4 preset modes the

setting that is closest to what you

want. Press .

For custom camera settings, see “Custom Camera Setup” on page 18

14 15

DST (Dual Sensor Technology)

45ft

10°

45°

54° Camera

Lens Angle 90ft

MAXIMUM TRIGGER RANGES

Dual Sensor Technology (DST™)

delivers a more complete picture

of game activity in your area.

Select the wider 45° sensor from

“Custom Menu” with a range of

45 feet (ideal for larger areas) or

select the narrower 10° sensor

with a range of 90 feet (for

use with a speciﬁc landmark or

feeder). Both sensors can also

be active at the same time by

selecting DST. Only the RCX-2

features this ground-breaking

technology.

Select a place to hang the camera.

(usually a tree). Avoid or remove any

obstructions.

1. Locate the camera where sun does

not shine straight into the camera

for best exposure results.

2. Mount the camera at a distance

above the ground at a height similar

to that of the target and with the

camera view parallel to the ground.

This is especially important when

using the 10° sensor alone. The

sensor zone is a cone so if you angle

it toward the ground, the sensor

range may end on the ground short

of where your targets will pass.

3. It is best to set the camera up where

the most likely target movement

is not coming straight toward the

camera, since the PIR sensors

work by comparing changes in

temperature between 2 side-by-side

elements.

The Lock-Down Security Plate attached to

the RCX-2 is for use with a Master Lock®

Python™ cable to prevent theft.

A Lock-Down Security Plate for

the RCX-1 is available and is sold

separately from the unit.

4. Run the strap through the slots.

5. Separate the buckle and thread the

loose end of the strap through the

loose buckle half.

6. Preadjust to a little larger than the

selected tree.

Camera Mounting

16 17

7. If the surface against the camera

is very uneven, use the included

standoffs to adjust the contact

points on the back of the camera as

needed. Three points of contact are

best for stability and adjustment.

Stack them for more height and

ﬁne-tune the ﬁnal angle with the

adjusting screw at the top of the

camera after mounting.

8. Wrap the strap around the tree,

and connect the buckle. Pull the

straps just snug enough to keep the

camera in place but to still allow the

camera position to be adjusted.

9. Connect the controller to the camera

with the USB cable.

10. Select the “Preview Camera”

Icon (the red deer) from the main

menu to activate Real Time Video

Alignment. You can now check the

framing of your picture through the

controller by seeing exactly where

the camera is pointed. Think about

how tall antlers might be and make

sure to not cut them off at the top of

the frame. Avoid framing too much

sky in the picture as the exposure of

the camera will compensate for this

brightness and foreground images

will be dark. This will also set the

night time IR ﬁlter to the proper

position to start taking photos.

11. Unplug the USB cable from the

camera. You can verify that the

camera is working properly by

covering the light sensor, which is

in the small hole above the Leupold

medallion on the front left side the

camera. Wave your hand in front

of the camera and you’ll see the

IR LEDs illuminate. A click of the

IR ﬁlter moving into position for

night pictures may also be heard.

This movement typically occurs only

twice per day: once in the morning

and once at night.

The camera will not start taking photos

until the USB cable is unplugged from the

controller.

NOTE: The camera has to have been

powered up for 30 seconds before it

will take pictures. This does include

time during set up, so after alignment,

it is usually ready to go. If you want to

avoid taking pictures of yourself leaving

the area, power the camera off and on

before securing the door and walking

away. This uses the 30 second power

buffer to allow time to get out of the

camera’s sensor reach.

18 19

Use the custom mode to reﬁne settings.

Night & day settings are modiﬁed

seperately, so be sure to set them both.

Automatic Camera Type Detection:

The controller will automatically detect

the type of camera and will only offer

settings that are available with that

model. If there is no camera connected,

RCX-1 or RCX-2 can be chosen on the

opening screen.

Video/Picture: Select whether the

camera will take video or still images.

Resolution:

.3 MP* to 10 MP for RCX-2,

.3 MP* to 8 MP for RCX-1.

Video: 320x240* or 640x480

Video settings

Video FPS: 15* or 30 Video frames

per second determines how smoothly

the video runs. The higher the number,

the better the video, but the greater the

ﬁle size.

Video Length: 5* to 60 seconds

*Lower values are recommended for smaller

SD cards and for quick ﬁeld downloads.

Dual Sensor Technology (DST)

Only the RCX-2 has DST, which uses

both a 45° sensor and a 10° sensor.

The 10° sensor provides the longest 45°

Custom Camera Setup range and the 45° sensor provides a

more forgiving wide sensor angle that

nearly covers the 54° ﬁeld of view of

the camera. The camera can be setup

to use either of the sensors or both

in combination. Activate both when

you want to maximize the number of

pictures.

The RCX-1 is equipped with only a 45 degree

sensor

Sensitivity

Auto: Adjusts to higher sensitivity

in hot weather when the air temp

is closer to that of a deer’s body. It

automatically sets to lower sensitivity

when it is cooler to avoid small target

triggers, like birds and squirrels.

Manual: Super high, high, medium

and low.

• Set to super high sensitivity for

maximum image count. 32 GB

SD cards and efﬁcient power

consumption can take more than

10,000 10 MP images. While taking

many pictures is possible, it will

make ﬁeld downloading slower.

In instances where the SD card is

nearly full, it may make more sense

to change cards rather than to

download.

• Set to a lower setting if you are

getting false triggers or pictures of

animals farther away than you want.

Operation Hours

The camera can be set to run for a

speciﬁc period of time to save batteries

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Leupold Caméra de repérage

Leupold

Leupold RCX Manuel utilisateur

Manuels Caméra de repérage populaires d'autres marques

Nestbox

Nestbox C13 Manuel utilisateur

Wildview

Wildview STC-TGL1 Manuel utilisateur

Stealth Cam

Stealth Cam CORE STC-Z3IRTL Manuel utilisateur

Suntek

Suntek HC-800M Manuel utilisateur

Spypoint

Spypoint G4 Manuel utilisateur

Duramaxx

Duramaxx 10029765 Manuel utilisateur

Brecom

Brecom C2400 Manuel utilisateur

BlazeVideo

BlazeVideo A280W Manuel utilisateur

Bestok

Bestok 5210GM Manuel utilisateur

GardePro

GardePro X60P Manuel utilisateur

Delta-Opti

Delta-Opti HC-SG880MK-18MHD Manuel utilisateur

PNI

PNI HUNTING 280C Manuel utilisateur

Muddy

Muddy Pro-Cam 14 Manuel utilisateur

Bresser

Bresser 3310006 Manuel utilisateur

Recon Outdoors

Recon Outdoors HS410 Manuel utilisateur

Braun

Braun 57660 Manuel utilisateur

Wildgame

Wildgame Shadow Manuel utilisateur

Spypoint

Spypoint FLEX Manuel utilisateur