Lenovo ThinkServer TD100 Manuel utilisateur

Installation instructions for manual installation of

Microsoft Windows Server 2008

First Edition

Updated: 10 October 2008

NOTE: Before using this information and the product it supports, read the general

information in Section 5.0 Notices this document.

Follow the network operating system (NOS) installation instructions provided in this

document in sequential order unless these instructions advise you otherwise. Windows

and messages might differ from those in this document.

1.0 What you will need

You must have the following software and hardware for the installation:

A licensed copy of Microsoft® Windows® Server 2008 Enterprise Edition.

An external DVD reader device might be required. (to create the DVD).

Supported hard disk drives. Go to http://www.lenovo.com/thinkserver/ for the

Lenovo® ThinkServer® Proven list of supported options and part numbers for the

server.

2.0 Where to download device drivers and files

You can download the device drivers from the Device Drivers matrix on the Lenovo

Support Web site: http://www.lenovo.com/support

3.0 Installation instructions for Microsoft Windows

Server 2008

You must first download the RAID device driver onto a diskette.

3.1 Creating a RAID device driver diskette

To create the RAID device driver diskette, complete the following steps:

1. From an Internet-connected system with a diskette drive, go to:

http://www.lenovo.com/support and select Driver matrices from the Quick links.

2. Click ThinkServer and then click your machine type to view the Drivers and

software list.

3. Locate and click the link for the controller driver, and then click the executable

file link.

4. Click I agree to accept the license agreement.

5. Insert a blank, formatted diskette, and click OK. The device driver files are then

extracted to the diskette.

Note: Adaptec drivers must be in the root directory of the diskette to install properly.

6. When prompted, click Quit.

3.2 Creating a logical array

To create a logical array, complete the following steps:

1. Switch on the server. While the server is starting, press Ctrl + A.

2. Select Array Configuration Utility and press Enter.

3. Select Initialize drives.

4. Press the space bar to select the drives that you want to include in the array and

press Enter.

5. Select Yes.

6. Press the space bar to select the drive.

7. For the Array Type, select Volume and press Enter.

8. Type an Array Label and press Enter.

9. Select Manage array to verify that the array was created successfully.

10. Press Esc, and then press Esc again.

11. Select Yes.

12. The server reboots.

13. Press F12 to open the Boot menu and select and select CD Drive to set the server

to boot from the Windows Server 2008 Setup CD.

3.3 Installing Windows Server 2008

To install Microsoft Windows Server 2008, complete the following steps:

1. Connect the server to a network as required.

2. Depending on your server, you might need to attach an external DVD reader

device.

3. Turn on the server and insert the Windows Server 2008 Setup DVD into the DVD

drive.

4. When you are prompted with the message "press any key to boot from cd or dvd",

press any key. Windows Server 2008 Setup copies the files from the Setup DVD.

Windows load the files (this process takes several minutes).

5. In the Windows Server 2008 window, select the following:

a. For Language to install, select English.

b. For Time and currency format, select English (United States).

c. For Keyboard or input method, select US.

6. Click Next.

7. Click Install Now.

8. Type your product key.

a. Check the Automatically activate Windows when I'm online check box

and click Next.

b. Scroll down and read the license agreement.

c. Click I accept the license terms and click Next.

9. Select Custom (advanced).

10. When Windows Server 2008 Setup displays all hard disk storage that is available

on the server, select one of the following options to choose or create a drive

partition in which to install Windows Server 2008:

oAllow Setup to create a partition: To partition the entire hard disk as one

primary partition, highlight Disk0 unallocated space for the hard disk

drive on which you want to install Windows Server 2008 and press Next.

oCreate a partition: To create a partition, highlight Disk0 unallocated

space for the hard disk drive on which you want to install Windows

Server 2008, click Drive options (advanced); then, click New. You are

prompted to indicate how much available space to allocate from the

nonpartitioned drive. Type the amount of space (in MB), click Apply;

then, click Next.

oDelete a partition.

11. Setup formats the selected partition and copies the applicable files to the drive

partition. This process takes several minutes.

When Windows Server 2008 Setup has completed installation, the server

automatically restarts.

12. After Windows Server 2008 restarts, you will be prompted to change the

administrator password before you can log on.

13. After you are logged on as the Administrator, a configuration wizard window is

displayed. Use the wizard for naming and basic networking setup.

14. Next, use the Microsoft Server 2008 Roles and Features functions to setup the

server to your specific needs.

4.0 Post installation instructions: Installing and

updating device drivers

After the installation is complete, make sure that you have the latest device drivers and

firmware for the server. To install the device drivers and to identify hardware that is not

functioning, open Device Manager. In Device Manager, non-functioning devices are

usually listed under Other Devices and are indicated by a yellow exclamation point. To

open Device Manager, complete the following steps:

1. Click Start.

2. Right-click Computer.

3. Select Manage and then click Continue; then, select Device Manager in the left

pane.

The following sections include instructions for installing some device drivers. More

device drivers might be available in the Driver matrices on the Lenovo Support Web site.

4.1 Installing the Intel chipset device driver

To install the Broadcom NetXtreme Gigabit Ethernet device driver, complete the

following steps:

1. From an Internet-connected system with a diskette drive, go to:

http://www.lenovo.com/support and select Driver matrices from the Quick links.

2. Click ThinkServer and then click your machine type to view the Drivers and

software list.

3. Locate and click the link for the controller driver, and then click the executable

file link.

4. Type c:\drivers\nic for the folder where the files are to be saved. Click

Finish.

5. Click Yes to create the folder.

6. When the message "The package has been delivered successfully" is displayed,

click OK.

7. Navigate to c:\drivers\nic, and open launch.exe.

8. Click Driver Installer.

9. In the Welcome window, click Next.

10. In the License Agreement window, read the agreement, then select I accept the

terms in the license agreement, and click Next to continue.

11. Click Install to begin the installation.

12. When prompted to restart the server, select No, and click Finish.

To configure the network, click: Start -> Control Panel -> Network Connections, and

select New Connection Wizard to set up the network connection.

To configure network protocols, right-click Local Area Connection in the Network

connections window, and click Properties.

To join a domain, click Start, Control Panel, System, click the Computer Name tab,

and then click Change.

4.2 Installing the ATI video device driver

To install the ATI RN50/ ES1000 video device driver, complete the following steps:

1. From an Internet-connected system, go to: http://www.lenovo.com/support and

select Driver matrices from the Quick links.

2. Click ThinkServer and then click your machine type to view the Drivers and

software list.

3. Locate and click the link for the controller driver, and then click the executable

file link.

4. Locate and right-click the .zip file, and then select Extract All.

5. Click Next, select a location to extract the device driver; then click Next.

6. Leave "Show extracted files" checked, and click Finish. A window will open

showing the extracted files.

7. Click Setup.exe to run the downloaded executable file.

8. In the Welcome window, click Next.

9. In the License Agreement window, read the license agreement, and then click

Yes.

10. Click Express.

11. Select No, I will restart my computer later, and click Finish.

5.0 Notices

LENOVO PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF

ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED

TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT,

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some

jurisdictions do not allow disclaimer of express or implied warranties in certain

transactions, therefore, this statement may not apply to you.

This information could include technical inaccuracies or typographical errors. Changes

are periodically made to the information herein; these changes will be incorporated in

new editions of the publication. Lenovo may make improvements and/or changes in the

product(s) and/or the program(s) described in this publication at any time without notice.

Lenovo and ThinkServer are trademarks of Lenovo in the United States, other countries,

or both.

IBM is a trademark of International Business Machines Corporation in the United States,

other countries, or both.

Microsoft and Windows are trademarks of Microsoft Corporation in the United States,

other countries, or both.

Intel, MMX, and Pentium are trademarks of Intel Corporation in the United States, other

countries, or both.

Other company, product, or service names may be trademarks or service marks of others.

Autres manuels pour ThinkServer TD100

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Lenovo Serveur

Lenovo

Lenovo ThinkServer TS200v Mode d’emploi

Lenovo

Lenovo ThinkSERVER TS130 Mode d’emploi

Lenovo

Lenovo ThinkSystem SR150 Manuel utilisateur

Lenovo

Lenovo ThinkServer RD120 Manuel de la liste des pièces

Lenovo

Lenovo ThinkAgile SXM4200 Manuel de service

Lenovo

Lenovo thinksystem SR630 Manuel utilisateur

Lenovo

Lenovo ThinkServer TD100 Guide de démarrage rapide

Lenovo

Lenovo System x3500 M5 Type 5464 Manuel utilisateur

Lenovo

Lenovo thinksystem SR630 Manuel utilisateur

Lenovo

Lenovo ThinkServer RD530 Feuille d'instructions

Lenovo

Lenovo ThinkSystem SR250 Guide de l'administrateur

Lenovo

Lenovo ThinkServer RD240 Guide de démarrage rapide

Lenovo

Lenovo ThinkServer RD530 Manuel utilisateur

Lenovo

Lenovo ThinkAgile MX3321-H Manuel utilisateur

Lenovo

Lenovo ThinkServer RD430 Manuel utilisateur

Lenovo

Lenovo ThinkServer TD200x Manuel utilisateur

Lenovo

Lenovo ThinkServer RD530 Mode d’emploi

Lenovo

Lenovo ThinkServer RD330 Manuel utilisateur

Lenovo

Lenovo ThinkServer TD200x Manuel utilisateur

Lenovo

Lenovo THINKSERVER RS210 Instructions d'installation

Lenovo

Lenovo System x3850 X6 Manuel utilisateur

Lenovo

Lenovo BladeCenter H Manuel utilisateur

Lenovo

Lenovo ThinkServer RD210 Manuel utilisateur

Lenovo

Lenovo ThinkServer TS100 Manuel utilisateur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur