Capacity: 330 lbs./150 kgs/330:00 lb:oz.
Items must have a weight of .5 lb/.25 kg/8oz. or more to register.
IT IS IMPORTANT TO READ AND UNDERSTAND ALL OF THE
INSTRUCTIONS AND SAFEGUARDS PRIOR TO USE
Part
#Description
Qty Part
#Description
Qty
•
•Graduation: 0.1 lbs. / 0.05 kgs.
•Battery operated: 1- 9V battery (included)
•AC Power cord: 10’(included)
•Cord: 7 1/2’ fully extended
•Battery saving auto shut o (5 minutes)
1. Place scale on a at, stable surface.
2. Press the ON/OFF BUTTON on the display.
3. Wait for the display to show 0.0.This may take several seconds.
4. Use the MODE BUTTON on the display to change the reading from lbs., oz., or kgs.
5. Place the item to be weighed in the center of the stainless steel platform.
6. Weight of item will be displayed.
7. Remove item from scale.
Clean with a damp cloth and mild detergent.
Never immerse unit, display, or cord in water or other liquids.
INACCURACY/ERROR
KEY PAD FUNCTIONS
OPERATING INSTRUCTIONS
GENERAL WARNINGS AND SAFETY INFORMATION
CLEANING
SCALE FEATURES
• Save these instructions for future reference.
• The scale must be kept stable for accurate weighing.
• Do not drop, shock or overload the scale.
• Place items to be weighed onto the scale with care. Although the scale is designed to be durable, rough treatment may
permanently damage the internal sensor.
• The weight of the item should not exceed the capacity of the scale (330 lbs./150 kgs.). Overloading the scale may cause damage.
• Items should be placed on the center of the scale when being weighed.
• Scale should be kept free of dust, dirt, moisture, vibration and not in close proximity to other electronic equipment. Any or all of
these may cause an adverse eect on the reliability and accuracy of the scale.
• If “0.Ld” appears on the display, then the item’s weight has exceeded the maximum capacity of the scale. Remove item
immediately. Scale can be permanently damaged by overloading.
• Store scale in a cool dry place. Do not expose the scale to moisture.
• Avoid lengthy exposure to extreme heat or cold.
• Do not allow items to sit on scale platform for an extended amount of time. Doing so may have an adverse eect on the longevity
and accuracy of the scale.
• Failure to follow these directions/precautions may result in damage to your scale and may void warranty.
Platform
Cord
Display
Adaptor
Foot
Battery Cover
1
1
1
4
5
6
1
4
1
1
2
3
ON/OFF: Power switch
MODE: Change the weight unit between pounds, ounces, and kilograms.
TARE: This function is used to allow you to subtract the weight of a container.
1. Put container on scale.
2. When readout is stable, press TARE-“o”will show by tare on display.
3. Display will return to zero and allow you to add items to the container and obtain the weight of
the items only, not the container.
a. PressingTARE will reset the scale to zero.
PCS: This function counts pieces according to weight.
1. Display on scale should read 0.00.
2. Add 25, 50, 75, or 100 pieces being weighed to the scale.
3. Press and hold PCS
4. Press MODE to choose the # of pieces on the scale (25,50,75, or 100).
5. Press PCS again.
6. Then you can remove pieces weighed and weigh random number of pieces.The # of pieces will
be reected on the display.
LEM Products • West Chester, OH 45011 • PH: 877-536-7763 • lemproducts.com LEM Products • West Chester, OH 45011 • PH: 877-536-7763 • lemproducts.com
The primary reasons for inaccuracy or error are low batteries, incorrect calibration, overload or operation on an unstable
surface. This scale is a precise instrument and must be handled with the utmost care.
