Leightronix IncodeX Stream Guide rapide
END-TO-END Solutions for
Broadcast & Streaming
Installation, Configuration, and Operation Instructions
PRODUCT MANUAL
©2018 LEIGHTRONIX, INC. All rights reserved.
The information in this manual is subject to change without notice.
IncodeX Stream and VieBit are trademarks of LEIGHTRONIX, INC.
LEIGHTRONIX, INC.
1125 N. Cedar Rd
Mason, MI 48854
Phone: (800) 243-5589 or (517) 694-8000
Fax: (517) 694-1600
www.leightronix.com
Support
At LEIGHTRONIX, every customer gets free support for the life of their
product, at no extra charge. There are no service contracts, no annual
renewals, no allowances, no deductibles, and no exclusions.
In addition to a 5 year hardware warranty, benets include access to:
• Priority Toll-Free telephone support
• Email Support
• Online support, desktop to desktop via Webex®
• Software updates
• Firmware updates
• Assistance with updates
Phone: (800) 243-5589
Email: [email protected]
Table of Contents
PACKING LIST ................................................................................................................................ 1
REQUIREMENTS............................................................................................................................. 1
IMPORTANT SAFETY INSTRUCTIONS ......................................................................................... 1
FRONT PANEL ................................................................................................................................ 2
BACK PANEL .................................................................................................................................. 2
Connectors ...................................................................................................................... 2
On/Off Switch .................................................................................................................. 2
SETTING UP THE INCODEX STREAM .......................................................................................... 3
1. Install it. ....................................................................................................................... 3
2. Plug it in....................................................................................................................... 3
3. Congure Your Network Settings................................................................................. 4
Automatic Network Conguration ........................................................................................... 4
Manual Network Conguration ............................................................................................... 4
4. Congure Your Firewall. .............................................................................................. 6
UPDATING/CHANGING INCODEX STREAM SYSTEM SETTINGS .............................................. 7
Specify Audio/Video Input and Encoding Settings........................................................... 7
Change Network Settings................................................................................................ 8
Obtain UDP Port Number................................................................................................ 8
Update Firmware............................................................................................................. 8
SPECIFICATIONS.......................................................................................................................... 10
PRODUCT WARRANTY ................................................................................................................ 12
DECLARATION OF STANDARDS CONFORMITY ....................................................................... 12
TABLE OF CONTENTS
2018-05-18 Page 1
IncodeX Stream
HD/SD Live Streaming Encoder
Thank you for purchasing the IncodeX Stream HD/SD live streaming encoder. The IncodeX Stream™
live streaming encoder combined with the subscription-based VieBit™ streaming service allows you
to create your own affordable, high quality live streaming channel.
The IncodeX Stream encoder captures a live video/audio signal from a LEIGHTRONIX server or other
video source and converts the signal into an outbound, HD or SD H.264 digital video stream. The
outbound stream is directed to the VieBit streaming service’s web servers and then simultaneously
distributed to local and worldwide viewers.
(1) IncodeX Stream HD/SD Live Streaming Encoder
(1) IncodeX Stream HD/SD Live Streaming Encoder Manual
(1) VieBit Streaming Solutions Manual
(1) Part #10-0311, AC Power Cord, 6 ft.
(1) Part #10-4856, CAT 5e Ethernet Cable, 7 ft.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that
produce heat.
9. Do not defeat the safety purpose of the grounding-type plug. A grounding-type plug has two blades and a third grounding
prong. The third prong is provided for your safety. If the provided plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
14. When the apparatus is turned off, certain components in the power supply and system board remain energized. In order to
remove all electrical power from the apparatus, unplug the power cord from the MAINS socket outlet.
To reduce the risk of electric shock, do not expose this apparatus to rain or moisture.
This apparatus must be connected to a MAINS socket outlet with a protective earthing
connection.
IMPORTANT SAFETY INSTRUCTIONS
PACKING LIST
REQUIREMENTS
• VieBit streaming service annual subscription
• Sustained outbound/upload bandwidth for transferring live stream to the Internet should roughly total the selected
video bit rate plus the audio bit rate plus 64 kb/s for overhead
• See “Table 1, Firewall Port Numbers Needed for Streaming” on page 6 for port numbers that need to be
opened between the IncodeX Stream encoder and domain names/IP addresses specied in the table
Page 2 2018-05-18
IncodeX Stream
HD/SD Live Streaming Encoder
The IncodeX Stream front panel indicators provide status on your encoder’s power connectivity and encoding activity.
The red “Power” indicator lights up when your IncodeX Stream is connected to a power source and turned on. The
green “Active” light turns on when the IncodeX Stream is encoding.
A: 1 BNC HD/SD-SDI video input connector
B: 1 BNC composite video input connector
C: 2 RCA audio input connectors (left & right)
D: 1 RJ-45, 10/100 BASE-T Ethernet port with LED
status indicators
E: On/Off switch
F: Power cord connector
FRONT PANEL
BACK PANEL
Connectors
The IncodeX Stream back panel, includes, from left to right, top to bottom:
On/Off Switch
To turn on power to the IncodeX Stream, press the “–” symbol on the switch upward. The IncodeX Stream starts to en-
code when it is powered on. To turn off the IncodeX Stream, press the “o” symbol on the switch downward.
ABC D E F
2018-05-18 Page 3
IncodeX Stream
HD/SD Live Streaming Encoder
1. Install it.
The IncodeX Stream encoder may be left as a standalone, tabletop unit or mounted into a rack as follows:
a. Insert the IncodeX Stream into the rack, aligning the holes of the unit’s mounting bracket with those of the rack.
b. Secure the IncodeX Stream to the rack with user-supplied rack screws.
2. Plug it in.
Using a straight-through RJ-45 Ethernet cable,
connect the IncodeX Stream Ethernet port
directly to a cable or DSL modem or to a 10/100
BASE-T switch on your TCP/IP network. To
check your network connection, look at the Eth-
ernet LEDs above the Ethernet port and com-
pare to the table at left.
IncodeX Stream Ethernet LED Indicators
LED Position State Description
Left Off Connection speed is 10Mb/s
Blinking amber Connection speed is 100Mb/s
Right Off Ethernet link not established
Steady on green Ethernet link established.
Attach your network, power, and signal wiring to the IncodeX Stream according to the instructions below:
Connect the included power cable to the
power cord connector and then plug the
other end into an AC power source.
SETTING UP THE INCODEX STREAM
Leave empty rack spaces above and below the IncodeX Stream. The
IncodeX Stream should not have anything stacked on top of it.
If using, connect your
analog audio source to
the audio inputs.
LEIGHTRONIX strongly recommends the use of an uninterruptible power supply (UPS) with the IncodeX
Stream. Damage from power loss or spikes is not covered under warranty.
Once the IncodeX Stream encoder is installed, wired, and congured with network settings accord-
ing to the steps in this section, the encoder will automatically start converting the incoming video/
audio input signal into an H.264 video stream. As long as the IncodeX Stream is powered on and
has a connected video input, the encoder will continually output a video stream.
NOTE: For optimal performance, use a dedicated,
DSL Internet business connection with your
IncodeX Stream.
If using an analog video source,
connect your source to the com-
posite video input.
If using a digital video
source, connect your source
to the SDI video input.
Page 4 2018-05-18
IncodeX Stream
HD/SD Live Streaming Encoder
3. Congure Your Network Settings.
Automatic Network Conguration
The IncodeX Stream is shipped Dynamic Host Conguration Protocol (DHCP) enabled, meaning that if your network
uses a DHCP server, your encoder will automatically obtain an IP, subnet mask, and gateway address when it is con-
nected to a power source and your network. Skip to Step 4 on page 6.
NOTE: To quickly check if your network is connected to a DHCP server, go to a computer connected to your network
and see if it has been set to use DHCP.
Manual Network Conguration
If your network does not use a DHCP server, you will need to obtain a static IP, subnet mask, and gateway address for
your IncodeX Stream from your network administrator and then replace your IncodeX Stream’s default static network
addresses as follows:
a. Connect your IncodeX Stream’s Ethernet port to the Ethernet port on a laptop or PC with an Ethernet cable.
b. Change the IP address of your computer to a static 10.xx.xx.xx IP address that does not match the default static
IP address of your IncodeX Stream, 10.11.31.2. A good rule of thumb is to just add one to the last value in the
IncodeX Stream’s default static IP address, so you would use “10.11.31.3.”
c. Access the IncodeX Stream’s browser-based interface as follows:
i. Open an Internet browser on the computer connected to your IncodeX Stream.
ii. In the URL address line, enter the IncodeX Stream’s default static IP address, 10.11.31.2, and press enter.
You will be prompted to enter a username and password (see Illustration 1).
Illustration 1, IncodeX Stream Interface Login Box
2018-05-18 Page 5
IncodeX Stream
HD/SD Live Streaming Encoder
iii. In lowercase, enter “admin” into the “User name” eld and ”stream” as the password. Click “Ok” to open the
IncodeX Stream interface in your Internet browser window (see Illustration 2).
iv. Stop the IncodeX Stream from encoding by clicking “Stop Encoder.”
v. Select the “Static” mode from the rst “Network Settings” drop down eld.
vi. Enter the IP, subnet mask, and gateway addresses you have obtained from your network administrator into the
corresponding elds.
NOTE: Be sure to write down your static IP address in a known location so that it is available if needed, as this
information will be needed to access your IncodeX Stream’s interface in the future.
vii. When you have nished entering in your network settings, click the “Apply Settings” button. Your IncodeX
Stream will automatically reboot to apply the network address changes. The IncodeX Stream will resume encod-
ing once it restarts.
viii. Detach the IncodeX Stream’s Ethernet port from your computer or laptop and then connect the encoder to your
network.
Illustration 2, IncodeX Stream Interface
Page 6 2018-05-18
IncodeX Stream
HD/SD Live Streaming Encoder
4. Congure Your Firewall.
In order for the VieBit service to receive a video stream from your IncodeX Stream, open the rewall ports shown in
Table 1 between your IncodeX Stream’s media access control (MAC) address and the domain names and IP address
also specied in Table 1.
NOTE: Your IncodeX Stream’s MAC address is its 12 character serial number.
Table 1, Firewall Port Numbers Needed for Streaming
Port Number Port Function Domain Name/
IP Address
80 HTTP for access of your VieBit
subscription information license.leightronix.com
53 DNS for domain name resolution 67.227.136.122
123 NTP for clock synchronization between the
IncodeX Stream and VieBit servers time.leightronix.com
Check the IncodeX Stream’s web
interface for the specic port number
your encoder is using (see “Obtain
UDP Port Number” on page 8) or
open on all ports
UDP for the delivery of the IncodeX Stream’s
video stream to the VieBit servers harbor.pegstream.com
Autres manuels pour IncodeX Stream
1
Table des matières
Autres manuels Leightronix Équipement d'enregistrement
Manuels Équipement d'enregistrement populaires d'autres marques
Strymon
Strymon NIGHTSKY Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuel utilisateur
Tews Technologies
Tews Technologies TPMC465 Manuel utilisateur
Honeywell
Honeywell Excel 50 Manuel utilisateur
SeaLevel
SeaLevel COMM+8.LPCI Manuel utilisateur
Arturia
Arturia AUDIOFUSE STUDIO Manuel utilisateur
