LEGO Vision Command 9731 Manuel utilisateur
TM
9731
4131280
TM
TM
www.legomindstorms.com
2x
14x
3x
3x
3x
2x
2x
2x
2x
2x
2x
2x
2x
2x
2x
2x
2x
2x
2x
2x
2x
1x
1x
1x
1x
4x
4x
4x
4x
4x
4x
4x
4x
12x
12x
6x
4x
8x
1x
4x
The Constructopedia is a building guide for Vision Command. It offers suggestions, hints and tips
to help you build and program robotic inventions that respond to what they see.
Follow these steps to get started:
Welcome
1. Build
The L GO Cam snaps right
into any L GO construction.
Use the Constructopedia or
your imagination to build
a stand for your camera.
2. Program
Choose different patterns to place over the Cam Viewer.
Program each region to detect different events like
motion, light or color.
L GO Cam is a powerful PC Video Camera.
Capture images and video that you can email to your friends.
3. Run
Run your program from your
PC and see what happens.
Parts ID
CONTENTS
Introduction
LEGO Cam page 4
Getting Started page 5
How it Works page 6
Connecting Camera page 7
Building Instructions
Cambots Overview page 8
LEGO Cam Mount (LCM) page 10
QuadPod page 16
Monitor Stand page 24
Motorized Cambots Overview page 28
Cam Rack page 30
Power Cam Rack page 33
Power Stand page 34
Special Features
S’Cargobot page 38
Design Tips page 41
Extras
Tips page 42
Parts ID page 43
© 2000 The LEGO Group
LEGO, MINDSTORMS, Robotics Invention System, Vision Command, RCX and Constructopedia
are trademarks of the LEGO Group.
4 5
LEGO CAM GETTING STARTED
5meter/15 feet cable attaching
to the USB port of the computer
Microphone
Push button for
still pictures
LED lights up when the LEGO Cam
is in operation
ocus ring for manual
focusing of the image
This is the LEGO Cam, a powerful PC Video Camera. You can capture still images
and video, which you can edit and email to your friends, or you can attach it to
your LEGO robots to create robots that see.
Installing the software, and Camera Setup
Be sure to install the software before plugging in the camera.
1. Insert the Vision Command software CD into the CD-ROM drive of your computer.
2. Wait a few seconds. The installation screen of the Vision Command software should
automatically be launched when you insert the CD-ROM into your drive.
If you do not see the installation screen, double-click your CD-ROM drive icon in the
Windows Explorer®. Then double-click the Setup.exe program. You should now be able
to install the software.
3. During software installation, Setup will prompt you to connect the camera cable
to your computer.
4. Remove the camera from the box.
5. Remove the protective cap from the end of the camera cable.
6. Insert the camera cable into the USB port. The USB port may be at the back of the
computer, or on the monitor.
7. Continue with the software installation by following the on-screen prompts.
Note: indows 98 CD may be required during installation.
How to connect to USB Port
76
INTRODUCTION BUILDING INSTRUCTIONS SPECIAL FEATURES EXTRAS
HOW IT WORKS
Vision Command
Vision Command lets you build and
program robotic inventions that respond
to what they see. You can program your
robot to watch for, and take pictures of
intruders, play music when you move in
front of the camera, or for those of you
with the Robotics Invention System,
follow you around the room.
Training Missions
By following the Training Missions
and Challenges in the Vision Command
Software, you will soon be programming
robots that see.
Command Center
First build one of the camera stands
shown in the Constructopedia. Next,
using the commands in the programming
environment, program your Cambot to
respond to one of the following Motion,
light, or color.
Now run your program and watch
Vision Command in action.
Camera Software
You can edit any photos your robot has
taken and email them to family and
friends, or create stop motion and time
lapse photography in the camera
software.
98
INTRODUCTION BUILDING INSTRUCTIONS SPECIAL FEATURES EXTRAS
CAMBOTS OVERVIEW
LEGO Cam Mount (LCM)
page 10
QuadPod
page 16
Monitor Stand
page 24
QuadPod + LCM
Monitor Stand + LCM
Here are some of the Cambots you can build with your Vision Command Set.
Turn to page 28 for more Cambots that are built using the RCX from the
Robotics Invention System.
You can build all three models on this page with the LEGO elements
from your Vision Command product.
1110
INTRODUCTION BUILDING INSTRUCTIONS SPECIAL FEATURES EXTRAS
2
3
LEGO Cam Mount (LCM)
The following pages show you how to build the LEGO Cam Mount.
This mount can be used to attach your camera to all of the other
stands included in this Constructopedia.
1
4 5
6
1312
INTRODUCTION BUILDING INSTRUCTIONS SPECIAL FEATURES EXTRAS
K
7
K
8
9
1514
INTRODUCTION BUILDING INSTRUCTIONS SPECIAL FEATURES EXTRAS
1x
10
2
3
4
1716
INTRODUCTION BUILDING INSTRUCTIONS SPECIAL FEATURES EXTRAS
QuadPod
The following pages show you how to build the QuadPod,
a base stand for the camera.
5
K
K
1
Table des matières
Autres manuels LEGO Jouet
LEGO
LEGO 60053 Manuel utilisateur
LEGO
LEGO Scala 3148 Mode d’emploi
LEGO
LEGO Creator 31022 Manuel utilisateur
LEGO
LEGO Mixels Chomly 41512 Mode d’emploi
LEGO
LEGO Club Ninja Bunker Mode d’emploi
LEGO
LEGO CITY 60034 Manuel utilisateur
LEGO
LEGO education 9688 Manuel utilisateur
LEGO
LEGO Technic 8445 Manuel utilisateur
LEGO
LEGO City 4436 Manuel utilisateur
LEGO
LEGO Kingdoms 7188 Mode d’emploi
LEGO
LEGO 71234 Manuel utilisateur
LEGO
LEGO Ninjago Zane 4618490 Manuel utilisateur
LEGO
LEGO 70123 Manuel utilisateur
LEGO
LEGO Mindstorms NXT 8527 Mode d’emploi
LEGO
LEGO 60105 Manuel utilisateur
LEGO
LEGO 9473 Manuel utilisateur
LEGO
LEGO Juniors 10673 Manuel utilisateur
LEGO
LEGO NinjaGQ 4618499 Manuel utilisateur
LEGO
LEGO 41005 Friends Manuel utilisateur
LEGO
LEGO 41593 Manuel utilisateur
