4
Basic safety precautions should always be followed when using this appliance.
1. Read these instructions thoroughly before use.
2. This appliance should not be used by children. Close supervision is necessary when using
this appliance near children.
3. Do NOT leave mill unattended when in use.
4. Do NOT use in damp or wet conditions.
5. For indoor use only.
6. To protect against electrical shock, do not place cord, plug or appliance in water or other
liquid.
7. Unplug from outlet when not in use or when moving or disassembling. Always unplug
using the plug and not by pulling on the cord.
8. Never connect or disconnect plug with wet hands.
9. Do NOT operate our mill with a damaged cord or plug, or if the appliance is damaged
or malfunctions in any way. Call our toll-free customer service number for information
regarding returning or replacing the mill. There are no user serviceable parts in this
appliance.
10. Do NOT allow the cord to hang over the edge of the table or counter or come in contact
with hot surfaces.
11. Only use mill on a solid, level surface.
12. Do NOT allow appliance to rest on the power cord.
13. Maintain a ventilation clearance of four inches on all sides of the mill.
14. If mill stops, or if there is excessive noise, turn power o, unplug from electrical outlet,
disassemble, clean all components then reassemble machine. Discontinue use and call
our toll-free customer service number if cleaning does not resolve these issues.
15. Keep ngers and other objects away from chute.
16. Do NOT push grains into chute.
17. Do NOT store your mill if any part of it is wet or damp.
18. Do NOT grind damp grains.
19. Only grind approved grains, as described later in this manual. Grinding unapproved
grains may impact the performance of your mill and/or void the warranty.
20. Clean grains before milling to remove stones or other small foreign objects.
21. Only use our mill for its intended use.
22. For household use only. This appliance is not intended or approved for commercial use.
23. Avoid contacting moving parts.
24. The use of attachments not recommended or sold by the manufacturer may casue re,
electric shock or injury.
25. Check hopper for presence of foreign objects before using.
SAVE THESE INSTRUCTIONS
BEFORE USING THE FIRST TIME
1. Remove all parts from the box.
2. Purge the mill by grinding 2 cups of grain or rice and discarding.
3. Disassemble and brush out the mill following the instructions in the
Disassembly and Cleaning section of this manual.
WARNING: KEEP FINGERS AND OTHER OBJECTS AWAY FROM INLET TO AVOID
PERSONAL INJURY OR DAMAGE TO MILL.
CAUTION: RISK OF SUFFOCATION - KEEP ALL PACKAGING AND PLASTIC BAGS
OUT OF THE REACH OF CHILDREN.
HOW TO USE
Your Lee Flour Mill is a gravity fed mill with a nine position control lever
to change the consistency of the grind from coarse to ne. The dust cover
reduces air-borne particles of your newly ground our. The mill is equipped
with a safety feature to automatically cut the motor in the event that
overheating occurs. If this happens, switch the power to OFF, unplug the mill
and give the motor 15 minutes to cool down before resuming use.
IMPORTANT SAFEGUARDS
!
WARNING: ALWAYS REMOVE THE PLUG FROM THE ELECTRICAL OUTLET BEFORE
DISASSEMBLING THE MILL TO AVOID PERSONAL INJURY.
3-PRONG PLUG
This appliance has a 3-prong (grounding) plug for use in a 3-prong (grounding)
outlet to minimize the possibility of electric shock. This appliance should only
be used with a 120V, 60Hz grounded outlet. Failure to follow these instructions
could result in re, electrical shock, serious injury, or death.
If the plug does not t fully in the outlet, contact a qualied electrician to install
a 3-prong (grounding) outlet. Do not attempt to modify the plug in any way. Do
not use an adapter or an extension cord. Failure to follow these instructions
could result in re, electrical shock, serious injury, or death.
