LEDYi Lighting RT2 Manuel utilisateur
Technical Parameters
Input and Output
Operation temperature
Environment
Ta: -30
O
C ~ +55
O
C
Safety and EMC
EMC standard (EMC) ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Radio Equipment(RED) ETSI EN 300 328 V2.2.2
Certication CE,EMC,LVD,RED
EN 62368-1:2020+A11:2020
Safety standard(LVD)
1
User Manual Ver 2.0.1
Model No.: RT2, RT7, RT8C
1, 4, 8 zone CCT/Touch color wheel/Wireless remote 30m distance/AAAx2 battery
CCT Touch Wheel RF Remote Controller
RT2 RT7
1 Zone CCT 4 Zone CCT
LVDRED
● Apply to dual color(warm white + cool white) LED controller.
Ultra sensitive color adjustment touch wheel.●
● Each remote can match one or more receiver.
● AAAx2 b attery powered.
● Operate with LED indicator light.
Features
Output signal (2.4 z)RF GH
Working voltage 3 AAAx2)VDC(
Working current <5mA
Standby current <10μA
Standby time 1 year
Remote distance 30m(Barrier-free space)
Warranty
5 years
Warranty
Operation
● When turn on light, the indicator display blue. when turn off light, the indicator display red.
● When touch the color wheel, the indicator will display the same color.
● When press or touch operation is invalid (If the light is off), the indicator display red.
● To extend battery life, no touch or press key operation after a few seconds, the touch wheel will enter sleep state, you need press any key to make touch
wheel quit sleep state.
Match Remote Control (two match ways)
End user can choose the suitable match/delete ways. Two options are offered for selection:
Use the controller’s Match key Use Power Restart
Match:
Switch off the power, then switch on power, repeat again.
Immediately short press on/off key (single zone remote) or zone key
(multiple zone remote) 3 times on the remote.
The light blinks 3 times means match is successful.
Delete:
Switch off the power, then switch on power, repeat again.
Immediately short press on/off key (single zone remote) or zone key
(multiple zone remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were deleted.
Match:
Short press match key, immediately press on/off key (single zone remote)
or zone key (multiple zone remote) of the remote.
The LED indicator fast flash a few times means match is successful.
Delete:
Press and hold match key for 5s to delete all match,
The LED indicator fast flash a few times means all matched remotes
were deleted.
Gross weight
Size
Package
0.088kg
L140 x W60 x H26mm
Mechanical Structures and Installations
53.00 mm
122.00 mm
17.50 mm
To x the remote, three options are offered for selection:
Option 1: x the remote' back holder on the wall with two screws.
Option 2: adhere the remote' back holder to the wall with paster.
RT8C
8 Zone CCT
3VDC
(AAAx2) Battery Back holder
58.00 mm
33.00 mm
53.00 mm
22.00 mm
● RT2 1 zone CCT remote
: Touch to change color temperature.
CWWW
S1S2S3S4
: Short press recall the scene, long press 2s save current state into S1/2/3/4.
The LED indicator display green when save OK.
S1S2S3S4
: 25%, 50%, 75%,100% brightness.
: Adjust brightness, short press 10 levels, long press 1-6s for continuous 256 levels adjustment.
: Turn on/off light.
: Get warm white or cold white directly.
CWWW
● RT7 4 zone CCT remote
: Short press turn on/off all zone light.
: Short press select and turn on zone light, long press 2s turn off zone light.
Short press multiple zone key fastly, will select multiple zone synchronously.
: Touch to change current zone color temperature.
: Short press recall the scene, long press 2s save current state into S1/2/3/4.
The LED indicator display green when save OK.
4 zone recall or save synchronously.
: Adjust brightness for current selected zone, short press 10 levels, long press 1-6s for continuous
256 levels adjustment.
: Get warm white or cold white directly for current selected zone.
CWWW
S1S2S3S4
124
3
S1S2S3S4
124
3
CWWW
Key function
Safety information
1. Read all instructions carefully before you begin this installation.
2. When installing battery, pay attention to the battery positive and negative polarity.
A long time without the remote control, remove the battery.
When remote distance becomes smaller and insensitive, replace the battery.
3. If no response from the receiver, please re-match the remote.
4. Gently handle remote, beware of falling.
5. For indoor and dry location use only.
2
User Manual Ver 2.0.1
124
3
S1S2
568
7
: Short press turn on/off all zone light.
: Short press select and turn on zone light, long press 2s turn off zone light.
Short press multiple zone key fastly, will select multiple zone synchronously.
: Touch to change current zone color temperature.
: Short press recall the scene, long press 2s save current state into S1/2.
The LED indicator display green when save OK.
8 zone recall or save synchronously.
: Adjust brightness for current selected zone, short press 10 levels, long press 1-6s for continuous
256 levels adjustment.
S1S2
124
3
568
7
● RT8C 8 zone CCT remote
Ce manuel convient aux modèles suivants
2
Autres manuels LEDYi Lighting Télécommande
Manuels Télécommande populaires d'autres marques
Panasonic
Panasonic EUR7622KB0 Manuel utilisateur
Bang & Olufsen
Bang & Olufsen Beo4 Manuel utilisateur
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur
Multiplex
Multiplex PROFI TX 9 Manuel utilisateur
One Remote
One Remote RMB4 Manuel utilisateur
FUTABA
FUTABA 9ZAP - PART2 Manuel utilisateur
