60mm 156mm
168mm
Please read these instructions before commencing installation
and retain them for future reference.
CHOOSING A MOUNTING LOCATION
• For the best results, fix your sensor on a solid surface, 1.8~2.5M above the ground
• For outdoor installation, a location under eaves is preferable
• Avoid aiming the motion sensor at pools, heating vents, air conditioners or objects that may
change temperature rapidly
• Do not allow sunlight to fall directly on the front of unit
• Try to avoid pointing the unit at trees or shrubs or where the motion of pets may be detected
• When choosing the mounting position consider that the sensor is more sensitive to motion across
the detection field (A) and less sensitive to motion directly towards the sensor (B) (Figure1)
• Select a location for the unit based on the coverage angles shown in Figure 2
SENSOR
LESS SENSITIVE
SENSOR
MORE SENSITIVE
SENSITIVITY TO MOTION
Figure 1
COVERAGE ANGLES
Figure 2
UNIT (M)
WIRING INFORMATION
Connection Box
220-240V Input
Brown = Live
Blue= Neutral
Green/Yellow = Earth
Walking Towards
Walking across
1
2
COVERAGE RANGE
The Ultra Slim Floodlights with PIR have a Pulse Override facility to enable lighting to be switched
on for long periods using an existing switch.
For pulse override switch the power OFF then ON twice within 1 second to enable constant light.
In constant light mode turn OFF then ON after 10 seconds to enable sensor mode.
A B
20m
10m
0
140
3.5m
220-240V
Ultra Slim COB LED Floodlights
with PIR Sensor 10W/30W/50W
Important information
It is recommended that floodlights are installed by a qualified electrician ensuring the
installation complies to current IEE wiring regulations & local building control.
• These products are designed for connection to a 220-240V mains supply.
• Any broken or damaged parts should be replaced as soon as possible.
• We will not accept responsibility for any claims arising from a poor installation.
Specifications:
• Voltage Range: 220-240V
• Nom. Watts: 10W / 30W / 50W
• Beam Angle: 120°
• IP Rating: IP65 Body / IP44 PIR sensor
• Warranty: 3 Years
• Die Cast Aluminium Casing
• Shatter Resistant Tempered Glass
• Not Dimmable
• Protection against electric shock: Class I
Requires earth connection
• With Connection Box
Sensor Specifications:
• Up to 10m Detection Range
• Time adjustment: 10sec. - 10min.
• Lux adjustment: 3 ~ 2000lux
• Detection Angle: 140°
• Mounting Height Recommended:
1.8 to 2.5m (2.9m max)
• Pulse Override Facility
• Includes additional Wall Mounting bracket
• Optional Garden Spike (not included)
• Operational Temp.: -20 C ~ +40 C° °
Dimensions:
63mm 190mm
197mm
134mm
60mm 104mm
LTUSF10PIR LTUSF30PIR LTUSF50PIR
Always switch off mains supply before servicing.
The distance between two floodlights should be no less than 50cm.
PULSE OVERRIDE FACILITY
INSTALLATION INSTRUCTIONS:
