TROUBLES SHOOTING
There is no motion on my winder
1. Check if you correctly plugged the A/C cable and adaptor.
2. If no A/C-adaptor cable has been plugged-in, make sure your batteries are OK and correctly
placed in their compartment.
3. Check if your DIRECTION-buttonhas been switched ON; respectively if you chose a TPD-
program.
4. Switch-OFF the DIRECTION-buttonbefore re-selecting your program / cycle: the winder should
start.
5. Make sure your winder is not in the SLEEP-phase.
Your watch stops despite the winder’s rotations
1. Raise the number of TPD
2. Check with the watch-manufacturer if the watch’s oscillating mass is winding up the watch
CLOCKWISE, ANTICLOCKWISE or in both DIRECTIONS. Adapt your settings in accordance.
3. Wind-up 10-20 times your watch crown before you put it on your watchwinder
For any further troubles, never hesitate to ask our authorized LEANSCHI retailer.
Check the nearest retailer’s location under leanschi.com
For our ENVIRONMENT sake, never dispose old batteries in the regular waste-bin. Bring them back
to a suitable batteries disposal & recycling centre.
