Leafield Environmental Meridan Manuel utilisateur
User guide
Meridan
LEAFIELD recycling products
Cleaning Products should be rinsed with
clean water and then washed with a mild
detergent solution using a bristle brush
or sponge. Care should be taken not to
apply undue pressure that may damage
labels. Flush clean with water after
washing. Non heated pressure washer
can be used at no closer the 400mm
away from the unit. The Pressure should
be no more than 100 Bar.
Tools No tools required
Remove Lid
12
Lift lid from front end, tilting
backwards to free from rear
locator
Lift the lid clear of the body and
put to one side
PPE Always wear appropriate PPE
equipment and follow safety guidelines.
Quality Standards All Leafield Environmental
products are certificated to BS EN ISO
envinfo@leafieldenv.com
12 3
Inserting sack
78
Replace Lid
Locate the sack around the rear of the
body, slide the edges of the sack around
the sack retention posts in the
moulding.
By lifting up the sack frame up and
keeping the sack taut. Wrap the sack
around the bar. Tuck the edges of the
bag inside the bin body.
Allow the sack frame to return back
into position. Repeat steps 1,2, and
three for all sack requiring
replacement.
Locate the rear peg of the lid under
the lip at the back of the body
Place the lid back in position ensuring
the front pegs locate in the body
envinfo@leafieldenv.com
Autres manuels Leafield Environmental Équipement industriel
