Leaf NP-100 Manuel utilisateur
User Guide 1 1/22/2013
Network Digital Signage Player
NP-100
User Guide
User Guide 2 1/22/2013
I. Player Connectors
From left to right
A: 12V DC: PowerAdapter (included)
B: UART: RS232 interface port (optional)
C:A/V out: Stereo audio output only for VGA
D. VGA: VGA video output
E. HDMI: HDMI video and audio output (cable included)
F. LAN: LAN or Internet network
Storage:
•NP-100 has internal 3.6GB free space and supports external storage (USB and SD card).
•Maximum capacity is up to 32GB for both USB/SD storage devices
•Can insert both USB drive or SD card, but priorityis in the setup settings below
•Storage priority can be selected in the Setup. If set to “Auto”, player will search available storage
device from USB, SD then internal flash order.
Preparation before operation:
a) Use PC to format your SD card or USB drive to “FAT32” mode
b) Internal disk 3.6GB memory can be used as content storage. If external device is
preferred then Insert SD card into SD card slot or USB drive into USB slot.
c) Video connection to LCD TV
i. Connect HDMI cable to LCD TV (HDMI always output and default is 1080p).
ii. Connect VGA to LCD TV (press “Video Mode” key of remote control if no output)
d) Connect audio cable (Red and White) to TV’s audio port. (no need this if HDMI output)
e) Connect Ethernet cable to NP-100’s LAN port and the other end to router’s LAN port
f) Plug in 12V AC power adapter (do not use other voltage)
g) Turn on power and wait for server connection. Screen will appear like below.
User Guide 3 1/22/2013
Desktop Status:
1. Top Row:
a. Stop: shows current player’s status (Stop, Play, Downloading…)
b. Status: shows current playlist’s status (OK and error messages)
2. Bottom Row
a. Storage: shows selected storage device(Internal Disk/SD/USB) and its memory usage.
b. Date: shows local time and date
c. Device: shows Local IP address and Mac address for player
d. Network: shows server connection status and server name
e. ID and Version #:icat 10 digits ID and firmware revision #
User Guide 4 1/22/2013
Setup Main Menu: (Press “Main Menu” key of remote control)
Key Operation
Navigation keys: only 4 arrow keys and middle key (orange color) are used to navigate all settings
Middle key (ENTER): pop up selection menu or go to sub-menu or action on cursor highlight text
1. Device
User Guide 5 1/22/2013
a. Clock Display : HH:MM on the playback screen location
i. Top Left
ii. Bottom Left
iii. Top Right
iv. Bottom Right
v. Off : Disable clock display
b. Storage Priority : Decide which device to use for playback/download
i. Auto : Start from USB => SD => Internal Disk order
ii. USB Drive : External USB drive
iii. SD Card : External SD card
iv. Internal Disk : Internal Flash Rom
c. JPEG Interval Time : picture duration time when playback series of JPG files
i. 5s : 5 seconds
ii. 10s : 10 seconds
iii. 15s : 15 seconds
iv. 30s : 30 seconds
v. 1Min : 1 minute
d. ICAT ID : 10 digits created from icat-3 software when adding new player
: Enter 0-9 number keys on each field then move down to Return
: “Reset” will restore default ID 001-001-0068
e. Format Disk : Format current disk and all content files will be erased.
2. Network
a. Network : Enable - will connect to network after power up.(Default)
: Disable - will not connect to network after power up. Local Mode
b. Server Address : Setup IP address by entering 0-9 numbers or
: Domain name by loading a configuration file “config.xml”
User Guide 6 1/22/2013
c. Device Address : Setup either DHCP or Static IP
3. Date & Time
a. Year/Month/Day/Hour/Minute : use 0-9 number keys or cursor up/down to adjust and
: use cursor left/right to move to next field
b. Date Format : MM/DD/YYYY, DD/MM/YYYY, or YYYY/MM/DD
c. Time Format : 12H or 24H
d. Time Zone : GMT +/- number for local time
e. Sync when powers up : Sync with time server to get current time at power up
f. Sync Now : Sync with time server, make sure server connection=ON
User Guide 7 1/22/2013
4. Screen Mode (must save & reboot after change mode, also icat3 must use right template)
a. Landscape : Landscape mode
b. Portrait : Portrait mode
5. Factory Default : Restore all settings to default values
6. Save & Reboot : All settings will be saved and reboot from power-up
7. Exit Main Menu : Return to main screen
Remote control and key definition:
User Guide 8 1/22/2013
ICAT-3 web address: http://np.miatek.com
To support all the new features (1080P HD video and resizable multi-zone) of NP-100, icat-3 has new user
interface and operation. Below is user guide how to use it.
Account: You will receive user ID and password from your reseller. Normally ID and password are same. You
can change your password under “Account” after you login.
System: Setup DST (Daylight Saving Time) schedule range, your local time zone and city code for weather.
Please visit www.weather.yahoo.com to check your local city code.
User Guide 9 1/22/2013
Step 1: Create Group
Click on , a new group edit window will appear below (left). Just enter group name and save.
Download Time is to setup when to download content for this group’s players. You can leave it blank. Player
will download new content any time as long as a new playlist/schedule is published. Or go to “Download” page
to setup your download schedule and select it here.
Step 2: Create Player
Click on , a new player edit window will appear above (right). Just enter player name then select its
group and save. City code is optional for local weather.
After saved, player name will appear on the player list with its 10 digit icat ID. This unique serial number is
User Guide 10 1/22/2013
associated with this player for future operation. Just enter these 10 digits on player’s setup under “Device” page.
Enter number key 1 6 1 3 4 4 2 6 7 7. And use arrow keys to move field.
Step 3: Upload media content
3 types of content can be uploaded to server and saved in the media library for future use. Supporting formats
are as follows;
HD Video 1080p: MPEG1、MPEG2、MPEG4、H.264、WMV
File extension: (mpg mpeg mp4 divx mkv mov)
SD Video 480p: MPEG2, MPEG4, AVI
Playback Format
Images: JPEG、BMP、PNG
Click on and following upload window will appear. Browse your image files from your local PC.
All images will be uploaded one by one till finished.
Media files can be displayed in “List” or “Grid” layout. On the top row, it’s filter function that allows you to
find or sort your data.
