Leadtek AMOR 8A10 Manuel utilisateur
AMOR 8A10
AMOR 8A10 User's Manual
Version C Code: LR8A10
January 2010 P/N: W05G0388
International Headquarters
18F, No. 166, Chien Yi Rd., Chung Ho,
Taipei County, Taiwan, (23511)
Tel:+886 2 8226 5800 Fax: +886 2 8226 5801
http://www.leadtek.com.tw E-Mail: [email protected]
Copyright 2010 Leadtek Research Inc. All rights reserved.
No part of this document may be copied or reproduced in any form or by any means without the prior written
consent of Leadtek Research Inc.
Leadtek makes no warranties with respect to this documentation and disclaims any implied warranties of
merchantability, quality, or fitness for any particular purpose. The information in this document is subject to
change without notice. Leatek reserves the right to make revisions to this publication without obligation to notify
any person or entity of any such changes.
Trademarks or brand names mentioned herein are trademarks or registered trademarks of their respective owners.
Important Notes
Important product safety informationand
1. Although has undergone several safety tests and
conforms to a number of national security standards, using the
device could become risky in certain abnormal climatic or seismic
conditions without correct operation. Please read the manual
carefully before operating the device.
2. For your safety, please keep power off when aboard
an aircraft.
3. In restricted areas such as gas stations or in the vicinity of
explosives, please shut down the . Under no
conditions should you use the near fuel or flammable
materials. (and its internal battery) has not been
certified as an intrinsic safe device.
4. Only Leadtek authorized service providers have the authority to
repair the .
5. As the is not water-proof, make sure to take
appropriate precautions in humid or rainy weather and keep it dry
at all times.
6. Before connecting any other device to the product, please read
detailed instructions in the user manual. To avoid any possible
damage do not connect the to any incompatible
product.
7. It is normal for the to become slightly warm during
operation.
8. Specification and functions vary in different areas.
AMOR 8A10
AMOR 8A10
AMOR 8A10
AMOR 8A10
AMOR 8A10
AMOR 8A10
AMOR 8A10
AMOR 8A10
AMOR 8A10
Battery safety notices
Failing to use the battery correctly could be hazardous. Please pay
attention to the following.
1. Your is powered by a rechargeable battery that can
be frequently charged and discharged. All batteries have a limited
usage lifetime. When the device’s uptime and standby time
becomes significantly shorter than normal, it is time to replace the
battery.
2. Use only batteries approved and authorized by Leadtek. If other
makes are used, damage to the product may result and voids the
warranty. Do not service the battery yourself. You should contact
Leadtek or its authorized service providers.
3. When removing the battery from the , make sure
is powered off first.
4. Please do not disassemble, alter, or solder the battery. This could
damage insulation, cause gas leakage, and damage to the battery
protection circuit and internal cells.
5. When the battery is not installed, place it in a water-proof and
insulated container. Under no circumstance should you use any
metal to connect the positive and negative terminals or place the
battery in a metal container. Do not place the battery in a
microwave or in a high-pressure container. This could cause a
short circuiting and fire.
6. Do not heat the battery or place it close to the source of fire, a
stove, or any heated environment over 45°C; short circuiting could
result in smoke emission or a fire.
7. Do not place the battery in a damp or humid place. This could also
cause short circuiting, smoke and eventually fire.
8. Charge the battery in normal temperature conditions. Avoid direct
exposure to the sun, stove, or any other environment where the
temperature exceeds 45°C. Follow the manual for proper battery
charging procedure and pay close attention while this takes place.
AMOR 8A10
AMOR 8A10
AMOR 8A10
9. Do not connect the battery to a vehicle cigarette lighter or any
electrical plug.
10. If the battery is charged in an abnormal environment the battery
protection device will fail. An adverse chemical reaction will result
as well as a potentially hazardous surge in electrical current.
11. If the battery is not fully charged within the specified duration, stop
charging immediately to avoid fire or damage to the battery.
12. Do not use the battery for any other purpose - it could shorten
battery life. Any surge of electrical current could result in fire.
13. Avoid direct physical contact with any battery leakage. If there is
any contact with battery leakage, make sure there is no contact
between hands and eyes. Wash eyes with running water and
consult with a doctor immediately if any contact accidentally
occurs.
14. If the battery gives off a strange smell, changes color or shows
evidence of an abnormal condition, remove it from the
housing and discard it properly. Consult your local agency or
check your local regulations on how to properly dispose a Lithium-
Ion battery.
15. Leadtek and its supplier are not responsible for any damage or
casualty as a result of mis-using the battery or not following the
conditions described in this Battery Safety Notice.
AMOR
8A10
Table of Contents
1 Quick Start
11 Introduction
12 What’s in the Package
13 Getting to Know Your AMOR 8A10
13 Front View
15
17 Using the Cradle
20 Using the Remote Control
22 How to Make and Receive a Video Call
22 Dialing Out
23 Direct Dialing
26 Speed Dialing
28 Dialing from the Call Log
29 Dialing from the Contact
30 Operations During a Call
42 How to Make 3-way Conference Call
44 How to Use the Call Log
Rear View
16 Side View
Table of Contents
47 How to Use the Contact
47 Creating a Contact
51 Editing a Contact
52 Deleting a Contact
53 Settings Menu
54 General Settings
60 Network Settings
66 Call Settings
68 Photo Settings
70 Product Information
71 Photo Displaying
72
77 Weather
79 News
81 Service
82 FCC Statement
Browsing Photos
76 Capturing Photos
This chapter will help you to quickly start using the AMOR 8A10 to
make a video call.
1. Quick Start
Before you begin
Using the 8A10 requires a
(e.g., a Cable modem or ADSL modem with a router). If you are
sharing your Internet connection with another device (such as a
PC), you will also need a broadband router or residential gateway.
The AMOR 8A10 also supports wireless connection. You can
connect the AMOR 8A10 to the Internet through a wireless AP /
router.
AMOR Broadband Internet connection
Setting up
Connect one end of the Ethernet cable (RJ-45), supplied with your
AMOR 8A10, to the AMOR
Connect the other end to an open Ethernet port on your router.
port marked “WAN” on the back of the
8A10.
Step 1. Connect the Ethernet cable
AMOR 8A10 Your Router
Ethernet Cable
1
Step 3. Extending the stand
Gently pull out the stand on the back of the AMOR 8A10 and extend it
to a 45-degree angle so that the AMOR 8A10 can stand on its own.
Connect the Power Adapter to the Power jack (
AMOR and then plug the Power Adapter into an electrical
outlet.
DC IN) on the back of
the 8A10
Step 2. Connecting the power adapter
Power Adapter
AMOR 8A10
2
Turning on the AMOR 8A10
The Power button is located at the upper right hand corner of the unit.
Press and hold the power button for three seconds, and the AMOR
8A10 will be turned on.
After 1 or 2 minutes, the 8A10 boots up, and you will see a
screen like the picture shown below. This means that you have to
calibrate the input. Please see page 59 for the detailed instructions on
how to proceed.
AMOR
3
Table des matières
Autres manuels Leadtek Téléphone
