LDA Audio Tech NEO8060 Guide d'installation et d'utilisation
Front microSD card
formatting
How to format the microSD card in
NEO8060's front panel
Ref: D-0015449-EN-r02
Support handbook
Front microSD card formatting
1. Description
This handbook describes a possible solution for issues related to the NEO8060's front
microSD memory card, because the PA and evacuation messages are stored in it.
WARNING:
After formatting the front SD, it is recommended to do a device reset to prevent possible
ghost files.
After formatting the front microSD, it is necessary to reload the messages in the device. In
the following manual, Loading messages on NEO System, available in our Support Web, it is
specified how to do it.
2. Formatting front SD card using NEO Configurator
First login in NEOc using the following data:
•User: default
•Password: 1234
Once logged in you shall search the device you wish to get connected to.
Front microSD card formatting
Select the device and click “Import system”, then close the “Search devices” window.
In the left column below the deployable item “Controllers”, click in NEO8060.
Click over “Advanced” tab in the central column, as is shown in the picture below. Then you
must see a line named “Format front panel SD card”, click over “Run”.
Front microSD card formatting
3. Formatting front SD card using NEOApp
This option will be only available to authorized users upon request of access password.
Please contact with suppor[email protected].
Once access to the software is completed, press “System -> LDA Discover Tool” to search
for the needed device in the network.
Using “LDA Discover Tool” the device could be found in the network, see “Found Devices”
section or search for it manually by pressing the “Unicast Send” box and writing the IP
address of the device required for connection. For connecting to the wished device, double-
click on it or right-click on it and press “Connect in NEOApp”.
Front microSD card formatting
The IP address can be typed down directly in the “Connection” section.
Once the device is online, go to “Files/Firmware”.
Front microSD card formatting
In the "Front SD card" section, click on the "Format SD" button. The following warning
message will appear. Click "Aceptar".
After formatting the front card, the following errors will occur:
•ERROR_EVAC_MESSAGE_FAILURE
•ERROR_ALERT_MESSAGE_FAILURE
Reload the messages again to finish. You can use the manual available in the description of
this document for help.
For further information, please visit our support website https://lda-audiotech.com/web-support/
Table des matières
Autres manuels LDA Audio Tech Système de sécurité
LDA Audio Tech
LDA Audio Tech EN54-16 Manuel utilisateur
LDA Audio Tech
LDA Audio Tech Neo VAP 1 Manuel utilisateur
LDA Audio Tech
LDA Audio Tech NEO Series Manuel utilisateur
LDA Audio Tech
LDA Audio Tech NEO Series Manuel utilisateur
LDA Audio Tech
LDA Audio Tech ONE Series Manuel utilisateur
LDA Audio Tech
LDA Audio Tech One Manuel utilisateur
Manuels Système de sécurité populaires d'autres marques
EDM
EDM Solution 6+6 Wireless-AE Manuel utilisateur
Highway Safety Group
Highway Safety Group EA401 Manuel utilisateur
Siren
Siren LED GSM Manuel utilisateur
Detection Systems
Detection Systems 7090i Instructions de montage
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manuel utilisateur
Siemens
Siemens FDM273 Manuel utilisateur