LD DAVE G4X Series Manuel utilisateur

DAVE G4X SERIES

COMPACT 2.1 PA SYSTEM

LDDAVE18G4X / LDDAVE15G4X / LDDAVE12G4X / LDDAVE10G4X

USER´S MANUAL

BEDIENUNGSANLEITUNG

MANUEL D´UTILISATION

MANUAL DE USUARIO

INSTRUKCJA OBSŁUGI

MANUALE D´USO

CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ / CONTENUTO

ENGLISH

ABOUT THIS MANUAL 3

INTENDED USE 3

EXPLANATIONS OF TERMS AND SYMBOLS 3

SAFETY INSTRUCTIONS 4

SCOPE OF DELIVERY 7

ASSEMBLY AND CABLING 8

CONNECTIONS, CONTROLS AND INDICATORS 10

CARE, MAINTENANCE AND REPAIR 14

OPTIONAL ACCESSORIES 15

TECHNICAL DATA 16

MANUFACTURER'S DECLARATIONS 20

DEUTSCH

INFORMATIONEN ZU DIESER

BEDIENUNGSANLEITUNG 21

BESTIMMUNGSGEMÄSSER GEBRAUCH 21

BEGRIFFS- UND SYMBOLERKLÄRUNGEN 21

SICHERHEITSHINWEISE 22

LIEFERUMFANG 26

AUFBAU UND VERKABELUNG 27

ANSCHLÜSSE, BEDIEN- UND ANZEIGEELEMENTE 29

PFLEGE, WARTUNG UND REPARATUR 33

OPTIONALES ZUBEHÖR 34

TECHNISCHE DATEN 35

ENTSORGUNG 38

HERSTELLERERKLÄRUNGEN 39

FRANCAIS

INFORMATIONS SUR CE MODE D‘EMPLOI 40

UTILISATION RÉGLEMENTÉE 40

EXPLICATIONS DES TERMES ET DES SYMBOLES 40

CONSIGNES DE SÉCURITÉ 41

CONTENU DE LA LIVRAISON 45

MONTAGE ET CÂBLAGE 46

CONNEXIONS, ÉLÉMENTS DE COMMANDE ET

D‘AFFICHAGE 48

ENTRETIEN, MAINTENANCE ET RÉPARATION 52

ACCESSOIRES OPTIONNELS 53

DONNÉES TECHNIQUES 54

DÉCLARATIONS DU FABRICANT 58

ESPAÑOL

INFORMACIÓN SOBRE ESTAS INSTRUCCIONES DE

USO

USO CONFORME A LA NORMATIVA 59

EXPLICACIONES DE TÉRMINOS Y SÍMBOLOS 59

INSTRUCCIONES DE SEGURIDAD 60

ALCANCE DE LA ENTREGA 64

MONTAJE Y CABLEADO 65

CONEXIONES, CONTROLES E INDICADORES 67

CUIDADO, MANTENIMIENTO Y REPARACIÓN 71

ACCESORIOS OPCIONALES 72

DATOS TÉCNICOS 73

DECLARACIONES DEL FABRICANTE 77

POLSKI

INFORMACJE DOTYCZĄCE NINIEJSZEJ INSTRUKCJI

OBSŁUGI 78

STOSOWANIE ZGODNIE Z PRZEPISAMI 78

OBJAŚNIENIA TERMINÓW I SYMBOLI 78

INSTRUKCJE BEZPIECZEŃSTWA 79

ZAKRES DOSTAWY 83

MONTAŻ I OKABLOWANIE 84

POŁĄCZENIA, ELEMENTY STERUJĄCE I WSKAŹNIKI 86

PIELĘGNACJA, KONSERWACJA I NAPRAWA 90

AKCESORIA OPCJONALNE 91

DANE TECHNICZNE 92

OŚWIADCZENIA PRODUCENTA 96

ITALIANO

INFORMAZIONI SU QUESTE ISTRUZIONI PER L‘USO 97

UTILIZZO IN CONFORMITÀ ALLE NORMATIVE 97

SPIEGAZIONI DI TERMINI E SIMBOLI 97

ISTRUZIONI DI SICUREZZA 98

AMBITO DI CONSEGNA 102

MONTAGGIO E CABLAGGIO 103

CONNESSIONI, CONTROLLI E INDICATORI 105

CURA, MANUTENZIONE E RIPARAZIONE 109

ACCESSORI OPZIONALI 110

DATI TECNICI 111

DICHIARAZIONI DEL PRODUTTORE 115

ENGLISH

YOU MADE THE RIGHT CHOICE!

This device was developed and manufactured under high quality requirements to ensure many years of

trouble-free operation. This is what LD Systems stands for with its name and many years of experience

as a manufacturer of high-quality audio products. Please read these operating instructions carefully so

that you can quickly and optimally use your new LD Systems product.

You can find more information about LD Systems on our website WWW.LD-SYSTEMS.COM

ABOUT THIS MANUAL

• Read the safety instructions and the entire manual carefully before commissioning.

• Observe the warnings on the unit and in the operating instructions.

• Always keep the operating instructions within reach.

• If you sell or pass on the appliance, be sure to hand over these operating instructions as well, as they

are an essential part of the product.

INTENDED USE

The product is a device for event technology!

The product has been developed for professional use in the field of event technology and is not

suitable for use in households!

Furthermore, this product is only intended for qualified users with specialist knowledge of event

technology!

Use of the product outside the specified technical data and operating conditions is considered

improper use! Liability for damage and third party damage to persons and property due to

non-intended use is excluded!

The product is not suitable for:

• People (including children) with reduced physical, sensory or mental abilities or lack of experience

and knowledge.

• Children (Children must be instructed not to play with the device).

EXPLANATIONS OF TERMS AND SYMBOLS

1. DANGER: The word DANGER, possibly in combination with a symbol, indicates immediately dangerous

situations or conditions for life and limb.

2. WARNING: The word WARNING, possibly in combination with a symbol, indicates potentially danger-

ous situations or conditions for life and limb

3. CAUTION: The word CAUTION, possibly in combination with a symbol, is used to indicate situations or

conditions that may lead to injury.

4. ATTENTION: The word ATTENTION, possibly in combination with a symbol, refers to situations or

states that can lead to damage to property and/or the environment.

DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

This symbol indicates hazards that can cause an electric shock.

This symbol indicates danger spots or dangerous situations.

This symbol indicates danger from hot surfaces.

This symbol indicates danger from high volumes.

This symbol indicates supplementary information on the operation of the product.

This symbol denotes a device that does not contain any user-serviceable parts.

SAFETY INSTRUCTIONS

DANGER:

1. Do not open or modify the device.

2. If your device is no longer working properly, liquids or objects have gotten inside the

device, or the device has been damaged in any other way, switch it off immediately and

disconnect it from the power supply. This device may only be repaired by authorized

specialist personnel.

3. For devices of protection class 1, the protective conductor must be connected correctly.

Never interrupt the protective conductor. Protection class 2 devices do not have a protec-

tive conductor.

4. Ensure that live cables are not kinked or otherwise mechanically damaged.

5. Never bypass the device fuse.

WARNING:

1. The device must not be put into operation if it shows obvious signs of damage.

2. The device may only be installed in a voltage-free state.

3. If the power cord of the device is damaged, the device must not be put into operation.

4. Permanently connected power cords may only be replaced by a qualified person.

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

DANGER:

1. Do not operate the device if it has been exposed to severe temperature fluctuations (e.g.

after transport). Humidity and condensation could damage the device. Do not switch on

the device until it has reached the ambient temperature.

2. Make sure that the voltage and frequency of the mains supply correspond to the values

indicated on the device. If the device has a voltage selector switch, do not connect the

device until this is set correctly. Only use suitable power cords.

3. To disconnect the device from the mains at all poles, it is not enough to press the on/off

switch on the device.

4. Ensure that the fuse used corresponds to the type printed on the device.

5. Make sure that appropriate measures against overvoltage (e.g. lightning) have been

taken.

6. Note the specified maximum output current on devices with a power out connection.

Make sure that the total power consumption of all connected devices does not exceed

the specified value.

7. Only replace pluggable power cords with original cables.

DANGER:

1. Danger of suffocation! Plastic bags and small parts must be kept out of the reach of

people (including children) with reduced physical, sensory or mental abilities.

2. Danger from falling! Make sure the device is installed securely and cannot fall. Only use

suitable tripods or attachments (especially for fixed installations). Make sure accessories

are properly installed and secured. Make sure that the applicable safety regulations are

observed.

WARNING:

1. Only use the device in the manner intended.

2. Only operate the device with the accessories recommended and intended by the

manufacturer.

3. During installation, observe the safety regulations applicable in your country.

4. After connecting the unit, check all cable routes to avoid damage or accidents, e.g. due

to tripping hazards.

Be sure to observe the specified minimum distance to normally flammable materials!

Unless this is explicitly stated, the minimum distance is 0.3 m.

ATTENTION:

1. There is a risk of jamming with moving components such as mounting brackets or other

moving components.

DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

DANGER:

1. Do not install or operate the device near radiators, heat registers, stoves or other heat

sources. Make sure that the device is always installed in such a way that it is sufficiently

cooled and cannot overheat.

2. Do not place any sources of ignition such as burning candles near the device.

3. Ventilation openings must not be covered and fans must not be blocked.

4. Use the original packaging or packaging provided by the manufacturer for transport.

5. Avoid shock or shock to the device.

6. Observe the IP protection class and the environmental conditions such as temperature

and humidity according to the specification.

7. Devices can be continuously developed. In the event of deviating information on operat-

ing conditions, performance or other device properties between the operating instruc-

tions and the device labeling, the information on the device always has priority.

8. The device is not suitable for tropical climate zones and for operation above 2000 m

above sea level.

ATTENTION:

Connecting signal cables can result in significant noise interference. Make sure that devices

connected to the output are muted during plugging. Otherwise, noise levels can cause

damage.

ATTENTION HIGH VOLUMES WITH AUDIO PRODUCTS!

This device is intended for professional use.

The commercial operation of this device is subject to the applicable national regulations and

guidelines for accident prevention.

Hearing damage due to high volumes and continuous exposure: The use of this product can

generate high sound pressure levels (SPL) which can cause hearing damage. Avoid exposure to

high volumes.

SIGNAL TRANSMISSION VIA RADIO (e.g. W-DMX or audio radio systems, Bluetooth):

The quality and performance of wireless signal transmissions generally depends on the

environmental conditions.

Influence on the range and signal stability, for example:

• Shielding (e.g. masonry, metal structures, water)

• High radio traffic (e.g. strong W-LAN networks)

• Interference

• Electromagnetic radiation (e.g. LED video walls, dimmers)

All range specifications refer to free field use with visual contact without interference!

The operation of transmitters is subject to official regulations. These can vary from region to

region and must be checked by the operator before commissioning (e.g. radio frequency and

transmission power).

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

WARNING:

Devices with wireless signal transmission are not suitable for operation in sensitive areas in

which radio operation can lead to possible interactions. These include, for example:

• Hospitals, health centers or other healthcare facilities that perform patient treatments

with specialized staff and equipment.

• Class I, II and III hazardous areas

• restricted areas

• military facilities

• airplanes or vehicles

• Areas where cell phone use is prohibite

NOTES FOR PORTABLE INDOOR DEVICES

Temporary operation! Event equipment is basically only designed for temporary operation.

Continuous operation or permanent installation can lead to impairment of the function

and premature aging of the devices.

SCOPE OF DELIVERY

Remove the product from the packaging and remove all packaging material.

Check that the delivery is complete and intact and notify your distributor immediately after purchase if

the delivery is incomplete or damaged.

The scope of delivery of the product DAVE 18 G4X includes:

• 1x DAVE 18 G4X Subwoofer

• 2x DAVE 18 G4X Satellite

• Power cord

• Operating instructions

The scope of delivery of the product DAVE 15 G4X includes:

• 1x DAVE 15 G4X Subwoofer

• 2x DAVE 15 G4X Satellite

• Power cord

• Operating instructions

The scope of delivery of the product DAVE 12 G4X includes:

• 1x DAVE 12 G4X Subwoofer

• 2x DAVE 12 G4X Satellite

• Power cord

• Operating instructions

The scope of delivery of the product DAVE 10 G4X includes:

• 1x DAVE 10 G4X Subwoofer

• 2x DAVE 10 G4X Satellite

• Power cord

• Operating instructions

DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

ASSEMBLY AND CABLING

DANGER:

Always place the speaker system in a suitable location on a sufficiently stable, level and

horizontal surface. Make sure that the speaker system cannot fall off the edge of a stage

(e.g. due to vibration). There is a risk that equipment that has not been set up and positioned

correctly will fall over or down. This can cause serious injury or death.

For optimal sound distribution of the bass, position the subwoofer centrally between the two satellite

speakers A. If a central position is not possible, the subwoofer can alternatively be positioned side-

ways B. Use the M20 flange on the top of the subwoofer to attach a distance rod. In both cases, select

the DSP preset corresponding to the set-up variant (MODE SELECT, left symbol).

The DAVE 12, DAVE 15 and DAVE 18 G4X satellites have a dual tilt flange with 0° and 5° tilt. Use the 0°

flange with a standing audience and adjust the height of the bottom edge of the satellites to approxi-

mately the head height of the audience.

Use the 5° tilt flange with a seated audience. Pay attention to the maximum permissible load and

height of the stands and spacer rods used (stands and spacer rods optionally available).

The entire electronics with DSP and power amplifiers are located in the subwoofer of the DAVE G4X

speaker systems, therefore a connection between subwoofer and satellites only has to be made using

suitable speaker cables (optionally available, recommendation min. 2 x 1.5 mm²).

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

If the standard set-up of the DAVE G4X speaker system is not desired or possible, the set-up can be done

with a distance rod and a stand fork mounted on the subwoofer C. In order to achieve an impressive

stereo sound and to avoid unpleasant interference, select the DSP preset that corresponds to this setup

variant (MODE SELECT, right symbol) and use the stereo input INPUT 3L / 4R for control (XLR/jack combo

sockets or cinch sockets).

To set up 2 complete DAVE G4X speaker systems, positioned left and right in front of a stage, also use

distance rods with stand forks mounted on the subwoofers D. For both systems, select the DSP preset

that corresponds to this set-up variant (MODE SELECT, right symbol) and assign one mono channel each

(e.g. INPUT 1, SELECT LINE) to the left and right line signal of a feed device (e.g. mixing console). The

loudspeaker cables of a system should be crossed and connected to the satellites (right system in the

example).

DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

CONNECTIONS, CONTROLS AND INDICATORS

The connection and mixer sections of the DAVE G4X speaker systems are identical and are located on

the rear of the corresponding subwoofers (representative DAVE 18 G4X).

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur