LawnMaster Eco Series Manuel utilisateur
Eco-Series Edger
1
2
Contents
Safety Instructions ....................................................... 4
Preparation.............................................................. 5
Operation ................................................................ 5
Commissioning the Edger .......................................... 6
Engine Information:................................................. 6
Oil: ............................................................................ 7
Fuel: .......................................................................... 8
Assembling the Edger ............................................. 9
Handle: ................................................................. 9
Attaching the Handle to the Edger ................. 11
Cutter Nut........................................................... 13
Belt Adjustment.................................................. 13
Operating the Edger ................................................ 15
Operator Controls ................................................. 15
Starting the Edger ................................................. 16
Engaging Cutter.................................................... 17
Adjusting Cutting Depth ....................................... 17
Adjusting Curb Height........................................... 18
Adjusting Cutter Angle ......................................... 18
Maintenance ............................................................ 19
Engine .................................................................... 19
Cutter ..................................................................... 19
4
Safety Instructions
Read the instructions carefully. Be familiar
with the controls and use of the equipment
before you begin.
Know how to stop the Edger and disengage
the controls quickly in an emergency.
The operator or user is responsible for
accidents or hazards occurring to other
people or property.
Safety
Never allow children or people unfamiliar
with these instructions to use the Edger.
Never operate the Edger while people or
animals are nearby.
While edging, always wear substantial
footwear and long trousers. Do not operate
the Edger when barefoot or wearing open
sandals.
Never operate the Edger with defective
guards, shields or without safety protection
devices in place and in good working order.
Do not operate the Edger in a confined
space where dangerous carbon monoxide
fumes can collect.
Never operate the Edger backwards.
Always wear suitable eye and ear protection
when operating the Edger.
Use the Edger in daylight hours or in very
good artificial light.
5
Never lift or carry the Edger while the engine
is running.
Keep hands and feet well clear of rotating
blades and moving components
Always stop the engine when you leave the
Edger unattended and when crossing roads,
pathways or gravel drives.
Preparation
Thoroughly inspect the area where the Edger
is to be used and remove all stones, sticks,
wires and any other foreign objects.
Operation
Check that the Edger is in good working
order before using.
Do not adjust or modify the engine governor
or throttle settings as this will have a
detrimental effect on the Edger
performance and ultimately shorten the
Edger’s working life.
Visually inspect the Edger to ensure that all
parts are not worn or damaged.
Perform all the listed maintenance regularly.
Replace worn or damaged parts with
genuine spare parts only.
6
Commissioning the Edger
Open the carton and inspect the contents, you will
find
1x Edger
1x Edger Handle Assembly
1x Owner’s Manual
1x Engine Manual
1x Warranty Card
Take precautions when removing the Edger from
the carton to ensure that you do not put undue
stress upon your back when lifting. It is
recommended that two people lift out the edger to
prevent injury or if available, use a hoist.
Engine Information:
Refer to the separate Engine Manufacturers
Owner’s Manual Supplied with the Edger and carry
out all of the safety checks contained before
proceeding with the commissioning of the Edger.
7
Oil:
1. Place the Edger on a level surface.
2. Remove the oil dipstick.
3. Wipe the dipstick clean.
4. Fill to the full mark indicated, pouring slowly –
DO NOT OVERFILL.
5. Check the level by inserting
the dipstick back into the
engine without tightening.
6. Once full, screw the dipstick
securely back into place.
Note that if the engine is overfilled,
it will smoke excessively or appear
to be seized.
Caution
Engines are shipped without oil. Check the
engine manufacturers’ manual for oil grade
and quantity details.
Figure 1 Oil Dipstick
8
Fuel:
Your engine will run best of fresh, clean unleaded
petrol (91 octane). Do not over fill the petrol tank, it
is recommended that approximately 5 to 10mm of
tank space is left for fuel expansion.
When handling fuel:
Do not fill tank when the engine is running.
Do not smoke or expose to naked flame.
Do fill tank in an open well-ventilated area.
Do wipe away any spills.
Do move the mower away from any petrol
fumes before starting engine.
Caution
Petrol vapour is highly flammable. Handle
with extreme care. Store in approved
containers.
9
Assembling the Edger
Handle:
The handle is supplied in two pieces for shipping,
the main handle labelled (2) and the height\tilt
lever (4)
Unscrew the black knob (1) from height\tilt
lever (4).
Remove lever guide (3) from handle (2) by
undoing bolts (5).
Insert lever (4) upwards through the slot in
handle (2).
Figure 2 - Handle Assembly
Table des matières
