Launch X431 V Manuel utilisateur
How to restore X431 V (X431 Pro) to factory settings
Read this before operation:
1) the following method does not apply to X431 V+ and
X431 Pro3
2) Please use this function carefully, improper operation
may cause the dead of X431 V, besides, after the factory
settings are restored, all user data will be deleted.
Step –by –Step Operation:
Step 1: Make sure power supply is 100% (at least 60%
power or above), and shutdown X431 V.
Step 2: Long press the power button and volume up button
at the side of X431 V, to open the machine, and then come
to the menu as shown in the following Picture A.
Picture A
Step 3: In this menu, power button = Enter key, volume
button = up and down key.
Press volume button move to line 5 "wipe data/factory
reset", and press power button to confirm.
At this time, come to the next menu shown as following
picture B, press volume button move to the line with "Yes",
press power button to confirm.
Picture B
Step 4: After this step done, it will back to the menu of
picture A, then move to "wipe cache partition ".
Step 5: Finally, move to “reboot system", confirm and
reboot the machine, then X431 pro is restored to factory
settings.
Autres manuels pour X431 V
4
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Launch Comprimé
Launch
Launch X-431 EURO TAB II Manuel utilisateur
Launch
Launch X-431 PRO MINI Manuel utilisateur
Launch
Launch Creader Professional 919 MAX Manuel utilisateur
Launch
Launch X-431 PAD IV Manuel utilisateur
Launch
Launch TOUCH PRO ELITE Manuel utilisateur
Launch
Launch X-431 Euro Pro4 Manuel utilisateur
Launch
Launch X-431 PRO Series Manuel utilisateur
