Latitude Ana-Digit Manuel utilisateur
Ana-Digit Smart Watch
Instruction Manual
FCC Statement
FCC Caution:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
1.0 Introduction
Thank you for your purchase of the Ana-Digit Smart Watch.
With this watch, you can monitor your daily activities, incoming / missed call, email and message ! Simply put the watch
on your wrist and this watch will record the number of steps taken, the distance travelled and the calorie burnt in your daily
activity for your review.
This product has to be used in line with an iOS devices that support Bluetooth 4.0 technology to review your
daily activities.
Your Ana-Digit Smart Watch is carefully designed and produced. In order to fully utilize the features of the Ana-Digit Smart
Watch, it is advisable to use it in conformity with the notes mentioned below:
Read this user’s manual carefully before using the Ana-Digit Smart Watch and keep this manual in a safe place for future
reference.
Avoid exposing the Ana-Digit Smart Watch to extreme conditions for an unreasonable time.
Avoid rough use or severe impacts on the Ana-Digit Smart Watch.
Keep the Ana-Digit Smart Watch away from magnets or appliances which contain magnetic components such as speakers or
motors as these items may ruin the sensors.
Clean the Ana-Digit Smart Watch occasionally with a soft cloth.
DO NOT expose the Ana-Digit Smart Watch to strong chemicals such as gasoline and alcohol as they will damage the Ana-
Digit Smart Watch.
DO NOT dispose of the Ana-Digit Smart Watch into fire as the battery inside the main unit may explode.
WARNING!
Make sure that you fully understand the functions and limitations of the Ana-Digit Smart Watch and it is NOT a professional
medical device. Should you have any further questions regarding your daily life condition, please consult your doctor.
2.0 Specications
Features:
— BLE smartphones connectivity
— LED indicators
— Buzzer and vibration alerts
— Activity Monitor
— Personal Data Setting/Watch Configuration fully set from smartphones
— Automatic Time Sync
— Paging / Remote Shutter
[P]: PAGING [ST]: STATUS
[C]: CROWN
[G]: GOAL
[S]: SHUTTER
1. Download the app ( Name: BLE Analog) from the App store in your deivce before use.
After installing the APP, go to Setting in your iOS device and activate Bluetooth.
Setting Bluetooth Turn on
Setting Bluetooth Turn on
3.0 Device pairing
The following procedures guide you through the device pairing process:
3.0 Device pairing and unpair
Menu Setting Pair ID number
2. Go to the device pairing screen in the APP :
Menu Settings Device Pairing. Click the PAIR button.
The APP starts scanning for matching an available device.
To unpair the Ana-Digit smart watch,
press the forget button in the App.
Also forget the Bluetooth device in the iOS
3.0 Device pairing
[G]: GOAL
Press and hold [G] button for 2 seconds. Pairing success
BEEP BEEP
BEEP
3. Press and hold [G] button for 2 seconds to start pairing, beep beep sound will be generated.
When pairing are successful, beep beep beep sound will be generated.
Otherwise, It will terminate the search function after 20 seconds
4.1 Time setting with crown
— Pull the crown out to adjust the hour and minute hands. Recommend to pull the crown when the
Second hand comes to 12:00 position.
— Adjust the hands to a few seconds ahead of the real time
— Push the crown back to its normal position at the moment when the hands sync with the real time.
Pull the crown out to adjust Push the crown back to running position
4.0 Time setting
Analog movement
Time setting can be done manually with crown or via smartphones.
Note: Time setting is necessary whenever battery is changed.
4.2 Time setting through Apps
Menu Update Smart Watch Time
— Menu Update Clock
— The analog time is frozen by the APP.
— Input the current TIME (HH:MM:SS) in the APP
— Press “Sync Now” button and Beep-Beep is generated. The watch hands will be advanced in
fast pace to the current time automatically.
— Beep-Beep-Beep is generated at the end of adjustment.
Go to smart watch time setting screen in the APP:
Note: If the time is only a few minutes ahead of the real time, it will just stay in the current position and
wait for time elapse until real time is synced.
Automatic time sync: when the watch is connected to the phone, the time will automatically sync.
5.0 Notication mode
[P]: PAGING
Press to find the
smartphone
[ST]: STATUS
Press once to show all
kinds of notification alerts
if available
Press and hold 2 seconds
to clear all notification
status
Press to light up the goal
progress bar for 3 seconds
Press and hold 2 seconds
to start pairing
[G]: GOAL
[S]: SHUTTER
Press to take
snapshots
Note: Alert mode. Shows all kinds of notification alerts when available. Different notification status
indication methods will be discussed in the Notification mode section later.
Simply press the equivalent button to switch to the desired mode.
Table des matières
