Lars Thrane LT-300 Mode d’emploi

User & Installation Manual

LT-300 GNSS Receiver

Document Number: 95-100229 REV 1.00

Release date: March 23, 2016

Denmark

LT-300 User & Installation Manual

Lars Thrane A/S www.thrane.eu i

This Document is of © copyright to Lars Thrane A/S. It contains proprietary information, which is disclosed

for information purposes only. The contents of this document shall not in whole or in part be used for any

other purpose without prior permission from Lars Thrane A/S.

Disclaimer

Any responsibility or liability for loss or damage in connection with the use of this product and the

accompanying documentation is disclaimed by Lars Thrane A/S. The information in this manual is provided

for information purposes only, is subject to change without notice, and may contain errors or inaccuracies.

Manuals issued by Lars Thrane A/S are periodically revised and updated. Anyone relying on this information

should acquire the most current version e.g. from Lars Thrane A/S. Lars Thrane A/S is not responsible for the

content or accuracy of any translations or reproductions, in whole or in part, of this manual from any other

source.

Disposal

Old electrical and electronic equipment marked with this symbol can contain substances hazardous to

human beings and the environment. Never dispose these items together with unsorted municipal waste

(household waste). In order to protect the environment and ensure the correct recycling of old equipment as

well as the re-utilization of individual components, use either public collection or private collection by the

local distributor of old electrical and electronic equipment marked with this symbol. Contact the local

distributor or dealer for information about what type of return system to use.

IMO and SOLAS

The equipment described in this manual is intended for use on leisure and commercial marine boats not

covered by the International Maritime Organization (IMO) and Safety of Life at Sea (SOLAS) regulations.

LT-300 User & Installation Manual

Lars Thrane A/S www.thrane.eu ii

WARNING - Product installation

To ensure correct performance of this equipment,

it is strongly recommended that professionals, with

expertise, properly trained, and likewise authorized

within the industry is completing the installation.

Safety Instructions for Installer & Operator

The following safety instructions must be observed during all phases of operation, installation, service and

repair of this equipment. Failure to comply with these precautions or with specific warnings elsewhere in

this manual violates safety standards of design, manufacture and intended use of the equipment.

Lars Thrane A/S assumes no liability for the customer's failure to comply with these requirements.

Instructions for the Installer Instructions for the Operator

WARNING –Turn off power switch

Turn off the main power switch before installing

the equipment described in this manual. Do not

connect or disconnect equipment when the main

power switch is on.

WARNING - Safe navigation

This product is intended only as an aid to

navigation and must never be used in instead of

sound navigation judgement.

No one navigation device should ever be solely

replied upon for the navigation of a vessel. Always

confirm position against all available aids to

navigation, for safety of vessel and crew.

WARNING –Do not disassemble

Do not disassemble or modify this equipment. Fire,

electrical shock, or serious injury can result.

WARNING - Compass safe distance

The compass safe distance for standard and

steering compasses is 0.3 m (1 ft). Observe this

distance to prevent interference to a magnetic

compass.

WARNING - Permanent watch

In case of smoke or water leaks into the

equipment, immediately turn off the power.

Continued use of the equipment can cause fire or

electrical shock. Keep access and permanent watch

of the equipment in order to prevent any

unwanted escalation.

WARNING - Explosive atmosphere

Do not operate the equipment in the presence of

flammable gases or fumes. Operation of any

electrical equipment in such an environment

constitutes a definite hazard.

WARNING –Keep away from live circuits

Operational personnel must not remove product

enclosure. Do not service the equipment, with the

communication cable connected. Always

disconnect and discharge unit, cable and circuits

before touching them.

WARNING –Power supply protection

Make sure that the power supply is adequately

protected by a fuse or an automatic circuit breaker

when installing the equipment.

WARNING –Use only the supplied cable

Use only the supplied power and communication

cable for connecting the equipment.

WARNING –Input Power

The input voltage range is: 9

40 VDC.

If the safety precautions

and warnings above

are not followed, warranty

will be

void

LT-300 User & Installation Manual

Lars Thrane A/S www.thrane.eu iii

Required information for the reader

Throughout this document, essential information will be presented to the reader. The following text

(emphasized) has the following meaning and/or implication:

WARNING: A ‘Warning’is an Operation or Service procedure that, if not avoided, may cause a hazard

situation, which could result in personnel death or serious injury.

NOTE: A ‘Note’provides essential information to the reader.

IMPORTANT: Text marked ‘Important’provides essential information to the reader, and is key information

to the user in order for the equipment to work properly. Personnel injury or damage to the

equipment can occur if instructions are not followed.

LT-300 User & Installation Manual

Lars Thrane A/S www.thrane.eu iv

About this manual

Intended readers

This is a User & Installation Manual for the LT-300 Global Navigation Satellite System Receiver, LT-300 GNSS

Receiver. The manual is primarily intended for installers and service personnel.

Personnel installing or servicing the system should be professionals, with technical expertise, properly

trained, and likewise authorized.

All safety instructions and guidelines in this manual must be observed. The safety instructions are listed in

the beginning of the manual. The guidelines are to be found in the separate chapters, where it is needed.

Manual overview

This manual has the following chapters:

·Introduction –provides a high-level description of the product, technology, performance, installation

options, and installation steps to be completed.

·Quick installation guide –a short guide providing a minimum of information to complete an

installation.

·Installation –a complete description of mounting and installation details, with a step-by-step

instruction for both pole and roof mount installations.

·Connecting –a description of the unit connector, 8-pin multi cable, connecting to NMEA 0183,

connecting to NMEA 2000, and connecting the LT-Service Tool.

·Configuration using LT-Service Tool –a short description of the LT-Service Tool. A PC-program,

communicating over NMEA 0183, which is supporting configuration and maintenance functions.

·Service and repair –a short description of what to do in case of a defective unit.

·Troubleshooting –if the unit is not working as expected, please check this guide to help resolve the

problem

This manual has the following appendixes:

·Outline Drawings

·Performance

·Specifications

·NMEA 0183 Sentences

·NMEA 2000 PGNs

·LT-Service Tool (commands)

·Declaration of Conformity

Software versions

This manual corresponds to the following software:

Software Versions

Description

Version

GNSS Receiver

1.01

Service Tool

1.02

ABLE

OFTWARE

ERSIONS

LT-300 User & Installation Manual

Lars Thrane A/S www.thrane.eu v

Record of Revisions

Rev. Description Release Date Initials

1.00 Original document March 23, 2016 PT

LT-300 User & Installation Manual

Lars Thrane A/S www.thrane.eu vi

Table of Contents

INTRODUCTION .............................................................................................................................................1

QUICK INSTALLATION GUIDE ...................................................................................................................3

INSTALLATION...............................................................................................................................................5

CONNECTING ............................................................................................................................................... 19

CONFIGURATION USING LT-SERVICE TOOL...................................................................................... 26

SERVICE AND REPAIR ............................................................................................................................... 29

TROUBLESHOOTING ................................................................................................................................. 30

APP. A - OUTLINE DRAWINGS ................................................................................................................ 31

APP. B - PERFORMANCE........................................................................................................................... 33

APP. C –SPECIFICATIONS ........................................................................................................................ 34

APP. D - NMEA 0183 SENTENCES.......................................................................................................... 35

APP. E - NMEA 2000 PGNS ....................................................................................................................... 37

APP. F –LT-SERVICE TOOL (COMMANDS) ......................................................................................... 38

APP. G - DECLARATION OF CONFORMITY.......................................................................................... 39

LT-300 User & Installation Manual Introduction

Lars Thrane A/S www.thrane.eu 1 of 39

Introduction

Congratulations on your purchase of the LT-300 Global Navigation Satellite System (GNSS) Receiver!

The LT-300 GNSS Receiver is a maritime navigation product from Lars Thrane A/S. The LT-300 GNSS Receiver

is designed for the leisure as well as the professional maritime markets. The LT-300 GNSS Receiver meets all

standards and certification requirements needed for worldwide maritime navigation equipment.

Performance

The LT-300 GNSS Receiver is capable of providing positions with an accuracy better than 2 meters. The LT-

300 GNSS Receiver outputs navigation data (up to 10 Hz): UTC time and date, position, course over ground,

speed over ground, GNSS satellite information and magnetic variation, in order to give your vessel smooth

navigation capabilities. The 72-channel GNSS receiver benefits from advanced technologies such as:

·Receive and track multiple satellite systems (GPS, QZSS, GLONASS, and BeiDou)

·Support for Satellite-Based Augmentation System (SBAS): EGNOS, WAAS, and MSAS

The LT-300 GNSS Receiver is designed and built for the extremely demanding and rough environment at sea

and with an operational temperature range from -40⁰C to +55⁰C (-40⁰F to +131⁰F).

Installation & Navigation

The LT-300 GNSS Receiver is easy to mount on a 1”pole or roof-mount, with a single cable supporting NMEA

0183, NMEA 2000, and power. The LT-300 GNSS Receiver can be configured to either 4800 or 38400 baud

(NMEA 0183), and open or terminated (NMEA 2000). An external PC LT-Service Tool is available for optional

configuration and maintenance of the LT-300 GNSS Receiver.

More than 40 years of experience have been put into the design and construction of the advanced LT-300

GNSS Receiver, with an exceptional performance and specification level.

LT-300 User & Installation Manual Introduction

Lars Thrane A/S www.thrane.eu 2 of 39

Installation Guide

The following steps, with reference to relevant chapters, will provide you with information, considerations,

and guidance on how to complete a successful installation:

Step 1: Mounting the Unit see Installation on page 5.

Step 2: Connecting the Unit see Connecting on page 19.

Step 3: Configuring the Unit see Configuration using LT-Service Tool on page 26 (optional).

NOTE: A quick installation overview is presented in the Quick Installation Guide on page 3. Here most

of the necessary information is provided to perform a fast installation and take the product in

use. It is recommended to use the entire LT-300 User & Installation Manual as guidance for

the best possible and complete installation.

Autres manuels pour LT-300

Table des matières

Autres manuels Lars Thrane Récepteur

Lars Thrane

Lars Thrane LT-300 Dimensions

Manuels Récepteur populaires d'autres marques

Garmin

Garmin GA 23 Manuel utilisateur

Aiphone

Aiphone PS-12F Manuel utilisateur

IMES

IMES TCS-01CA-PMI Manuel utilisateur

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuel

AMIMON

AMIMON AMN12310 WHDI Manuel utilisateur

Dual

Dual DMCPA79BT Mode d'emploi

Sound Associates

Sound Associates SA652P Manuel utilisateur

Sherwood

Sherwood NewCastle R-772 Manuel utilisateur

Audio

Audio A10-RX Series Manuel utilisateur

AllSee

AllSee PushShare PSRV1.1 Manuel utilisateur

DEMAG

DEMAG DRC-DR D2 Manuel utilisateur

Teleco

Teleco TVRCL868A02 Manuel utilisateur

Bosch

Bosch RF3222E Manuel utilisateur

Kramer

Kramer 631R Manuel utilisateur

Xpress

Xpress xmc10 Manuel utilisateur

JVC

JVC KD-MR1BTS Manuel utilisateur

Omega Engineering

Omega Engineering UWTC-REC3 Manuel utilisateur

e-survey

e-survey E300 Pro Manuel utilisateur