Lark freecam 1.0 Manuel utilisateur
User manual/Instrukcja obsługi
Videorecorder/Wideorejestrator
The provider of the device reserves the right to modify the device without any prior notice.
Lark Europe Sp. z o.o. zastrzega sobie prawo do wprowadzania zmian w urządzeniu bez wcześniejszego powiadomienia.
FreeCam 1.0
Thank you for choosing Lark FreeCam 1.0.
We highlyrecommend reading this manual beforeyou start using the device.
Please, keep this manual for future reference. Defects caused by improper usage are not covered by the
manufacturer’s warranty, hence we do ask you to follow the instructions included in this booklet
Phe provider of the device reserves the right to modify the device or introduce any changes to this user manual
without anyprior notice.
Updated user manuals can be found on .www.lark.com.pl
On the website you can also find Frequently Asked Questions answers and other useful tips how to use your
device.
1
Dziękujemy za wybór urządzenia Lark FreeCam 1.0 i życzymy satysfakcji z jego użytkowania.
Prosimy o dokładne zapoznanie się z niniejszą instrukcją obsługi przed rozpoczęciem użytkowania.
Jednocześnie przypominamy, że uszkodzenia spowodowane nieprawidłową obsługą urządzenia nie są
objęte gwarancją.
Producent zastrzega sobie możliwość wprowadzania zmian w urządzeniu, jak i w instrukcji. Aktualizowane
wersje instrukcji będą umieszczane na stronie . Prosimy odwoływać się do stronywww.lark.com.pl
w przypadku pytań lub wątpliwości dotyczących obsługi urządzenia.www.lark.com.pl
Contents
2
Getting to know the device ............. .............. .............. .............. ..............3
Product features............................................................................................................3
Function keys...............................................................................................................3
Switching modes ............................... ................... ................... ................... ...................4
The number of shots & time of video recording ..........................................................................4
Using the device......................... .............. .............. .............. ..............5
Using micro SD card........................................................................................................5
Charging ...................................................................................................................5
PC Camera Mode ...........................................................................................................6
Getting started and loop shooting ........................................................................................7
Shooting while charging...................................................................................................7
Photo Mode.................................................................................................................7
Audio Recording Mode .....................................................................................................8
Playback Mode ................................. ................... .........................................................8
Deleting files ...............................................................................................................8
Menu settings ........................... .............. .............. .............. ..............9
Video Settings..............................................................................................................9
Photos settings.............................................................................................................9
Playback settings...........................................................................................................10
System settings ................................ ................... .........................................................10
Troubleshooting ......................... .............. .............. .............. ..............12
Specifications............................ .............. .............. .............. ..............13
3
Getting to know the device
Product features
2-inch LTPS TFT LCD screen
Focus range: 12cm to infinity.
HD wide angle lens
4x digital zoom
Video format: MJPEG ( AVI )
Built-in microphone & speaker
Filming while charging option
High capacity SD (SDHC) memory card support
Infrared video recording
Motion detection video recording
Function keys
Video recording / Photo / Playback
POWER to turn the device on or off
OK to confirm the option selection
UP move the camera up or activate 1/2/3/4 x digital zoom
DOWN move the camera down or activate 4/3/2/1 x digital zoom
MODE choose among Photo / Video Recording/ Audio Recording/ Playback modes
MENU click to exit
Getting to know the device
Switching modes
1. Press the “POWER” button to turn on the device
2. „Video recording’ is the default mode activated after turning the device on.
3. Press “OK” button again to pause the recording and save files automatically.
4. Press “MODE” button to select one of the modes available: photo, audio recording, playback, and video recording.
5. Press the “POWER” button and hold it for 3 second to shut down the device.
The number of shots & time of video recording
REMARK:
The number of shots that can be taken will vary depending on device settings, the subject and the memory card used.
Micro SD Card
1280*720
(720P)
848*480
(D1)
640*480
(640)
1280*1024
(1.3M)
1600*1200
(2M)
2048*1536
(3M)
2592*194
4 (5M)
16GB 240 min 240 min 260 min 12160 11520 10960 9440
8GB 120 min 120 min 140 min 6080 5760 5530 4720
4GB 60 min 60 min 80 min 3040 2880 2760 2360
2GB 30 min 30 min 50 min 1520 1440 1380 1180
1GB 15 min 15 min 30 min 760 720 690 590
4
Using the device
5
Using SD card
1. Insert your card into the SD slot until it clicks into place.
2. To remove the SD card, press the card lightly; it will eject partially allowing you to pull the card out.
3. With no card in the micro SD slot, the screen presents “ No card” message.
NOTE:
1. The SD card can be inserted in one way only. Attempts to insert it in any other way may damage the device.
2. The device will automatically set the memory card as the default destination for storing files.
Charging
The device has a built-in rechargeable battery that has to be charged fully after having been used up for the first
three times so that the maximum capacity of the battery can be activated. Charging time: 12 hours
1. Connect the device to a computer/laptop via USB
2. Connect the device to power outlet using the adapter included in the set.
CAUTION:
When the battery gets fully exhausted the device will enter a protection state. Please, charge the battery for at least 10 minutes to
make sure you can turn on the device again.
Using the device
6
PC Camera Mode
Easy connection with PCs/Laptops, no driver needed
1. Connect the device to a computer via USB.
2. Press the “DOWN/UP” button to choose the mode.
Three modes are available:
MSDC: it is a computer interface between a computer and a digital camera which shows the digital camera as
a removable disk drive attached to the computer.
PC CAM: A webcam is a video camera which feeds its images in real time to a computer or computer network
via USB.
Recording mode: Press “OK” to start video recording.
Getting started and loop shooting
1. Press “ON/OFF” button to enter video recording mode. A red camera icon will be displayed in the upper left
corner of the screen.
2. Press „OK” to start video recording
Loop recording: during recording, the device will save each video file in every 2 minutes automatically. When the SD
card is full, the device will delete the first video file automatically.
The infrared video recording function: when this option is active, the infrared LED will be switched on automatically
under low-light circumstances.
Shooting while charging
1. Connect the device to a power adapter or a car charger.
2. Press “ON/OFF” button to enter loop recording mode.
3. Press “OK” button to pause.
Photo Mode
1. Press the “MODE” button to choose the photo mode. The upper left corner will display“ Photos” icon.
2. Press “ OK” button to take photos.
3. Self-timer and other functions:
Press the“MENU” button in the photo mode
Press the “DOWN/UP” button to select self-timer option
Press OK.
Follow the same steps as above to change the settings of photo quality, metering mode, flash, exposure settings.
Press the ”MENU” button to exit the settings mode.
Using the device
7
Audio Recording Mode
1. Press “OK” button to get started.
2. Press “OK” button again in the audio recording state to stop recording and save the audio file.
3. Press “DOWN” button to pause or restart recording.
Playback Mode
1. Press the “Mode” button three times to enter playback mode. The upper left corner of the screen will display
„Playing” message.
2. Press „DOWN/UP” button to choose the file you want to play
3. Press ”OK” to play the file.
4. Press „DOWN” button to stop or play the file again.
Deleting files
1. Press the “MENU” button in the playback mode (playing photo/video)
2. Press the “DOWN/UP” button to select the file
3. Press “OK” to delete file.
Slide shows/ Special effects/ Rotation/ Set boot screen
Follow the same steps as above to change the settings of slide shows, special effects, rotation, set boot screen.
Using the device
8
Video settings
Turn the device on. Press “MENU” to enter the settings menu when in video recording mode. Then choose: Video
Settings / System Settings and press “OK” button to confirm.
1. Video formats available : 1280*720 /848*480 /640*480
2. Video time stamp: recording with / without time stamp
3. Motion detection: On/Off. The device will start video recording automatically while there is an object moving
in its field of view. During recording, the device will save each video file in every 2 minutes automatically.
When there is no object moving during two minutes, the device will enter standby state and re-start when it
detects an object moving again.
4. Cycle shooting: turn on / turn off
5. Cycle shooting time- the saving time of each section: 2 minutes/ 5 minutes / 10 minutes
6. Sound turn on/ off
7. Power off delay turn the device off after it is inactive for 10 minutes or 20 minutes.
After selecting the desired option, click “OK” button to confirm. Click“MENU” to exit the settings mode.
Photos settings
Turn the device on. Press “MODE” button to enter Photos mode. Choose “MENU” to enter settings mode. Press “MODE”
to select:
1. Photos size: 2592x1944 / 2048x1536 / 1600x1200 / 1280x1024.
2. Photos quality: Very Good / Good/ Normal.
3. Photos mode: Turn Off/ 2S autodyne/10S autodyne/ Continuous.
4. Exposure: Exposure adjustment.
Menu settings
9
Table des matières
Langues :
Manuels caméscope populaires d'autres marques
Panasonic
Panasonic AG-HMC152EN Manuel utilisateur
Insignia
Insignia NS-DCC5HB09 - Camcorder - 720p Manuel utilisateur
MYDLINK
MYDLINK DCS-6100LH Manuel utilisateur
Sony
Sony video Hi8 Handycam CCD-TR555 Manuel utilisateur
SECURECOM
SECURECOM V-5014B Manuel utilisateur
Panasonic
Panasonic HDC-SD100 Manuel utilisateur
