Lanner LEC-2055 Manuel utilisateur
>>
Embedded &
Industrial Computing
Hardware Platforms for Embedded and Industrial Computing
LEC-2055
Preliminary
User's Manual
Publication date:2011-08-10
2
About
About
Embedded and Industrial Computing
Overview
Icon Descriptions
The icons are used in the manual to serve as an indication
of interest topics or important messages. Below is a
description of these icons:
NOTE: This check mark indicates that
thereisa note of interestandissomething
that you should pay special attention to
while using the product.
WARNING: This exclamation point
indicates that there is a caution or
warning and it is something that could
damage your property or product.
Online Resources
The listed websites are links to the on-line product
information and technical support.
Resource Website
Lanner http://www.lannerinc.com
Product Resources http://assist.lannerinc.com
RMA http://eRMA.lannerinc.com
Copyright and Trademarks
This document is copyrighted, © 2011. All rights are
reserved. The original manufacturer reserves the right to
make improvements to the products described in this
manual at any time without notice.
No part of this manual may be reproduced, copied,
translated or transmitted in any form or by any means
without the prior written permission of the original
manufacturer. Information provided in this manual is
intended to be accurate and reliable. However, the original
manufacturer assumes no responsibility for its use, nor for
any infringements upon the rights of third parties that
may result from such use.
Acknowledgement
Intel, Pentium and Celeron are registered trademarks of
Intel Corp.
Microsoft Windows and MS-DOS are registered trademarks
of Microsoft Corp.
All other product names or trademarks are properties of
their respective owners.
Compliances and Certification
CE Certication
This product has passed the CE test for environmental
specifications. Test conditions for passing included the
equipment being operated within an industrial enclosure.
In order to protect the product from being damaged by
ESD (Electrostatic Discharge) and EMI leakage, we strongly
recommend the use of CE-compliant industrial enclosure
products.
FCC Class A Certication
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required
to correct the interference at his own expense.
TTaTTable of Contentsbeable of Contents
3
Chapter 1: Introduction 4
System Specication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Chapter 2: System Components 6
System Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Front Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Rear Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Chapter 3: Board Layout 10
External Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Internal Connectors and Jumpers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Connectors and Jumpers List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Jumper Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Chapter 4: Hardware Setup 16
Preparing the Hardware Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Installing the System Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Installing a CompactFlash Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Wireless Module Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
3G SIM Card Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Installing the Hard Disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Connecting Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Appendix F: Programming Watchdog Timer 20
Appendix G: Terms and Conditions 22
Warranty Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
RMA Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
4
Introduction
Chapter 1
Embedded and Industrial Computing
Chapter 1:
Introduction
Thank you for choosing the LEC-2055. The LEC-2055 is
an ultra-compact and robust embedded system which
comes with a Mini-PCIe socket with a SIM card reader to
enable 3G networks as well as GPS capability.
The following highlight the capabilities of the LEC-2055
system:
a Mini-PCIe socket with a SIM card reader•
Sutible VESA and wall mounts•
Small in dimension: 198x42x145mm•
(7.80”x1.65”x5.71”)
Wide operating temperature ranging from -10° to 55°•
Celsius
Accepting a variety of power sources with voltages•
between 12 and 36 Volts of direct current (via a 1x
2-pin Phoenix connector)
2 ports of RS232/422/485 and one port of RS232 (via•
DB-9 connectors)
System Specification
LEC 2 Series LEC-2055
Dimension (WxHxD) 198x42x145mm
(7.80”x1.65”x5.71”)
Processor Intel Atom N270 1.6GHz
Chipset Intel 945GSE + ICH7M
System Technology DDR2 SODIMM x1
Memory Max. Capacity DDR2 400/533 upp to 2GB
Storage IDE CF socket Type I/II x1
SATA 2.5” HDD/SSD drive bay x1
Ethernet Controller Realtek RTL8111 x2
Graphic Controller Intel GMA950
Audio Controller No
IO
LAN GbE RJ45 x2
Display DB15 x1 for VGA
Video Grabber No
Audio No
Serial I/O DB9 x3 for RS232/422/485
x2 and RS232 x1
GPS No
USB 2.0 Type A x2
Internal x2
Power Input 2-pin terminal block
Expansion Mini-PCIex1 with SIM card
reader
Others
External: 2x SMA antenna
holes, reset; Internal: PS/2
keyboard and mouse, +5Vdc
output
Power Input +12~36Vdc, ATX Mode
AC Adapter 60W +24V @ 2.5A
Hardware Monitor Fintek F81865 integrated
watchdog timer 1~255 level
OS Support Linux , Windows Embedded 7,
Windows XP/XP Embedded,
Certications CE, FCC Class A
Compliance No
Operating Temperature Range
with Industrial Components
(Industrial Memory, CF, HDD,
SSD….)
-10~55°C/14~131°F
Operating Temperature Range
with Commercial Components -5~45°C/23~113°F
5
Introduction
Chapter 1
Embedded and Industrial Computing
Package Contents
Your package contains the following items:
LEC-2055 Fanless Embedded System•
Serial-ATA/Power Cable (P/N: 080W1N0002001)•
Drivers and User’s Manual CD (P/N: S09OADA01H100)•
2-pin Female Terminal Block (04AW20021E101)•
6
System Components
Chapter 2
Embedded and Industrial Computing
Chapter 2:
System Components
System Drawing
Mechanical dimensions of the LEC-2055
Unit: mm
7
System Components
Chapter 2
Embedded and Industrial Computing
Block Diagram
The block diagram depicts the relationships among the
interfaces and modules on the motherboard..
Intel
ICH7M
Processor
ATOM N270
Fintek
F81865F
H/W Monitor
WDT
RS-232
1x Pin Header
PS/2 KB/MS
Pin Header
SATA
VGA
FSB
GbE LAN
2x RTL8111D
PCIe x2
IDE
DDR2 400/533MHz
SO-DIMM
Mini PCI Express
Socket
PCIe
USB SIM Card Reader
RS-232/422/485
2x DB-9
2x RJ-45 SATA-II
Connector
Compact Flash
Socket
LPC
Flash BIOS SPI
VGA
Intel
945GSE
DMI
IDE
USB 2.0 Ports
1x Type A
1x Pin Header
8
System Components
Chapter 2
Embedded and Industrial Computing
Front Components
Component Description Pin Definition Reference
F1 HDD (Yellow) and
Power LED (Green)
HDD
Blinking: data access activities•
Off: no data access activities•
Power
On: The computer is on.•
Off: The computer is off .•
POWER LED & Hard Disk
LED (LED2) on page 16
F2 Reset Switch A hardware reset button
F3 Two 10/100/1000Mbps LAN ports Two RJ-45 (network) jacks with LED
indicators as described below
LINK/ACT (Yellow)
On/Flashing: The port is linking•
and active in data transmission.
Off: The port is not linking.•
SPEED (Green/Amber)
Amber: The connection speed is•
1000Mbps.
Green: The connection speed is•
100Mbps
Off: .The connection speed is•
10Mbps.
LAN Ports (LANB1/LANB2)
on page 15
F4 Two USB 2.0 Ports An USB type A connector; in addition to
this connector, an internal pin header is
provided.
Dual USB Port Connector
0 and 1 on Page 15
F5 Serial Ports COM1 and COM2 provide RS232/
RS422/RS485 communications with
a dip switch selecting among these
standards.
RS-232 COM Port (COM1,
COM2 on page 14):
LINK/ACT
SPEED
F1 F2 F4
F3 F5
9
System Components
Chapter 2
Embedded and Industrial Computing
Rear Components
Component Description Pin Definition Reference
R1 Antenna Holes Reserved for SMA type antenna (*)
R2 Serial Port COM3 provides RS232 serial
communication. RS-232 COM Port (COMB1,
COM3 on page 14):
R3 VGA Port It connects an external VGA
monitor or projector. VGA in DB-19 connector (VGA1)
on page 15
R4 DC-In (power) LEC-2055 support power range
between 12V and 36V. DC_IN Connector (CON1) on
page 16
Note: Antenna is not included in the standard package. You can purchase it from Lanner
separately as an accessory.
R2
R1
R3 R4
10
Board Layout
Chapter 3
Embedded and Industrial Computing
Chapter 3:
Board Layout
External Connectors
The following picture highlights the location of system
input/output connectors. Refer to the table 3.1 Connector
List for more details.
LANB1/LANB2 COM1USB1
LED2
CON1
COM2
Table des matières
Autres manuels Lanner Ordinateur de bureau
Lanner
Lanner LEC-2530 Manuel utilisateur
Lanner
Lanner LEC-2250 Manuel utilisateur
Lanner
Lanner NVA-3000 Series Manuel utilisateur
Lanner
Lanner LEC-6032C Manuel utilisateur
Lanner
Lanner LEC-6021A Manuel utilisateur
Lanner
Lanner LEC-6040 Manuel utilisateur
Lanner
Lanner LVC-5550S Manuel utilisateur
Lanner
Lanner FW-7526 Manuel utilisateur
Lanner
Lanner NCA-1020 Series Manuel utilisateur
Lanner
Lanner LVC-5000-B0 Manuel utilisateur
