Labconco Logic+ A2 Manuel utilisateur

Logic+®and Cell Logic+®A2 | B2 Biosafety Cabinets

Axiom®C1 Biosafety Cabinets

PuriCare®Procedure Stations

LABCONCO CORPORATION

8811 Prospect Avenue

Kansas City, MO 64132

(800) 821-5525 I +1 (816) 333-8811

labconco.com

Please read user’s manual before

operating equipment

Original Instructions

Technical Manual

Logic+® Type A2 Biosafety Cabinets

30231xxx1 30241xxx1 30251xxx1 30261xxx1

30238xxx1 30248xxx1 30258xxx1 30268xxx1

30242xxx1 30252xxx1 30262xxx1

PuriCare®Procedure Stations

31241xxx1 31261xxx1 31242xxx1 31252xxx1 31262xxx1

Logic+® Type B2 Biosafety Cabinets

30348xxx1 30368xxx1

Cell Logic+® Type A2 Biosafety Cabinets

32239xxx1 33239xxx1 34239xxx1

32249xxx1 33249xxx1 34249xxx1

32259xxx1 33259xxx1 34259xxx1

32269xxx1 33269xxx1 34269xxx1

Cell Logic+® Type B2 Biosafety Cabinets

32348xxx1 33348xxx1 34348xxx1

32368xxx1 33368xxx1 34368xxx1

Axiom®Type C1 Biosafety Cabinets

30441xxx1 30448xxx1 30461xxx1 30468xxx1

Labconco Corporation. Labconco Corporation reserves the right to make periodic design changes without obligation to notify any person or entity of such change.

Warranty

Labconco Corporation provides a warranty to the original buyer for the repair or replacement of parts and reasonable labor as a result of normal and proper use of

the equipment with compatible chemicals. Broken glassware and maintenance items, such as filters, gaskets, light bulbs, finishes and lubrication are not

warranted. Excluded from warranty are products with improper installation, erratic electrical or utility supply, unauthorized repair, use with incompatible chemicals,

or non-factory modifications to the original product.

Purifier® Logic®+ and AxiomTM Biological Safety Cabinets and PuriCare® Procedure Stations carry a five-year warranty from date of installation or six years from

date of shipment from Labconco, whichever is sooner. Warranty is non-transferable and only applies to the owner (organization) of record.

Buyer is exclusively responsible for the set-up, installation, verification, decontamination or calibration of equipment. This limited warranty covers parts and labor,

but not transportation and insurance charges. If the failure is determined to be covered under this warranty, the dealer or Labconco Corporation will authorize

repair or replacement of all defective parts to restore the unit to operation. Repairs may be completed by 3rd party service agents approved by Labconco

Corporation. Labconco Corporation reserves the rights to limit this warranty based on a service agent’s travel, working hours, the site’s entry restrictions and

unobstructed access to serviceable components of the product.

Under no circumstances shall Labconco Corporation be liable for indirect, consequential, or special damages of any kind. This warranty is exclusive and in lieu of

all other warranties whether oral, or implied.

Returned or Damaged Goods

Do not return goods without the prior authorization from Labconco. Unauthorized returns will not be accepted. If your shipment was damaged in transit, you must

file a claim directly with the freight carrier. Labconco Corporation and its dealers are not responsible for shipping damages.

The United States Interstate Commerce Commission rules require that claims be filed with the delivery carrier within fifteen (15) days of delivery.

Limitation of Liability

The disposal and/or emission of substances used in connection with this equipment may be governed by various federal, state, or local regulations. All users of

this equipment are required to become familiar with any regulations that apply in the user’s area concerning the dumping of waste materials in or upon water, land,

or air and to comply with such regulations. Labconco Corporation is held harmless with respect to user’s compliance with such regulations.

For additional questions or support:

Labconco Customer Care +1 (816) 333-8811

Labconco Technical Support (800) 821-5525

Hours 7:30 a.m.-5:30 p.m. CST

Part #3849920 Rev. E

ECO M149

4 
 
 
Table of Contents 
 
1: INTRODUCTION 11
Contacting Labconco 11 
About This Manual 12 
Theory of Operation 12 
Type A2 12 
Type B2 13 
Type C1 –A mode 13 
Type C1 –B mode 14 
2: SAFETY PRECAUTIONS 15
Typographical Conventions 15 
General Safety Precautions 17 
Safety Precautions for this Product 19 
3: CATALOG NUMBER CONFIGURATOR 21
4: SERIAL TAG 22
Serial Tag Location 22 
Serial Tag Information 23 
Primary Serial Tag 23 
Secondary Serial Tag 23 
5: FACTORY TEST REPORT 24
Test Report Location 24 
Test Report Information 25 
6: ADDITIONAL PRODUCT INFORMATION 26
Data Plate Location 26 

5 
 
Data Plate Information 27 
7: EXHAUST SYSTEM CONNECTIONS 28
Exhaust Connection Best Practices 28 
Air-Tight Damper 30 
Exhaust System Requirements 31 
Type A2 Models 31 
Cell Logic+ Type A2 Models 32 
Type B2 Models 32 
Type C1 Models 33 
8: CONFIGURATION 34
Current Configuration 34 
Change Configuration 36 
9: CALIBRATION 40
Certifier Password 40 
Adjusting Blower Speed 41 
Adjusting the Internal Air Damper 43 
Setting the Filter Life Gauge 45 
Type A2 (8-inch through 10-inch sash) and Type B2 45 
Type A2 (12-inch sash) and Type C1 46 
Airflow Sensor Calibration 47 
Type A2 and Type C1 47 
Type B2 48 
Zero Point Calibration 50 
Vacuum Start Switch Calibration (Type C1 only) 51 
10: CERTIFICATION 53
Certifier Password 53 
Type A2 HEPA Filter Leak Test Preparation 53 
Theoretical Upstream Concentration 54 
Upstream Concentration Sampling 54 

6 
 
Type A2 Supply HEPA Filter Leak Test 56 
Acceptance Criteria 57 
Type A2 Exhaust HEPA Filter Leak Test 58 
Acceptance Criteria 59 
Type B2 Supply HEPA Filter Leak Test Preparation 60 
Theoretical Upstream Concentration 60 
Upstream Concentration Sampling 60 
Type B2 Supply HEPA Filter Leak Test 62 
Acceptance Criteria 63 
Type B2 Exhaust HEPA Filter Leak Test Preparation 64 
Theoretical Upstream Concentration 64 
Type B2 Exhaust HEPA Filter Leak Test 65 
Acceptance Criteria 65 
Type C1 Supply HEPA Filter Leak Test Preparation 66 
Theoretical Upstream Concentration 66 
Upstream Concentration Sampling 66 
Type C1 Supply HEPA Filter Leak Test 68 
Acceptance Criteria 69 
Type C1 Exhaust HEPA Filter Leak Test Preparation 70 
Theoretical Upstream Concentration 70 
Type C1 Exhaust HEPA Filter Leak Test 72 
Acceptance Criteria 73 
Downflow Velocity 74 
Acceptance Criteria 75 
Inflow Velocity 76 
Primary Method 76 
Acceptance Criteria 78 
Secondary Method 79 
Acceptance Criteria 83 
Work Area Air Cleanliness Test (optional) 84 
Acceptance Criteria 84 
Lighting Test (optional) 85 
Acceptance Criteria 85 
Noise Test (optional) 86 
Acceptance Criteria 86 
Vibration Test (optional) 86 
Acceptance Criteria 86 

7 
 
UV Light Intensity Test (optional) 87 
Acceptance Criteria 87 
Ground Fault Circuit Interrupter (GFCI) Test 88 
Acceptance Criteria 88 
11: QUICKCHARTS 89
QuickChart –Type A2 3-ft & 4-ft 90 
QuickChart –Type A2 5-ft & 6-ft 91 
Type A2 Footnotes 92 
QuickChart –Type B2 93 
Type B2 Footnotes 94 
QuickChart –Type C1 95 
Type C1 Footnotes 96 
12: ADVANCED SERVICE PROCEDURES 97
Tools 97 
Required 97 
Optional 97 
Removal of External Dress Panels 98 
Dress Panel 98 
Side Panels 99 
Front Sash 100 
Sash Level Adjustment 100 
Sash Sensor Adjustment or Replacement 101 
HEPA Filter Replacement 104 
Type A2 (8, 9, 10-inch sash) 104 
Type A2 (12-inch sash) 107 
Type B2 110 
Type C1 114 
Blower/Motor Replacement 117 
Type A2 (8, 9, 10-inch sash) & B2 117 
Type A2 (12-inch sash) & C1 Supply Blower/Motor 121 
Type A2 (12-inch sash) & C1 Exhaust Blower/Motor 124 
Changing the LED Lamps 129 
LED Lamp Socket Cap Replacement 131 
Changing the Optional UV Lamp 132 

8 
 
UV Lamp Socket Replacement 133 
Type B2 Prefilter Replacement 134 
Air-Tight Damper Adjustment 135 
Preparing the Biosafety Cabinet for Gaseous Sterilization 136 
Service Fixture Installation & Service Connection 137 
13: ELECTRICAL COMPONENTS 140
Electronics Module 140 
Electronic Module Components 141 
Resetting a Circuit Breaker 142 
Power Supply Board 143 
Display Board 144 
Speaker 145 
Blower Motor 146 
Wiring Diagrams 148 
100-115V 148 
208-240V 149 
14: TROUBLESHOOTING 150
Blower and Lights not working 150 
Blower only will not start 151 
Lights only will not illuminate 152 
UV Light will not illuminate 153 
Airflow Alert activating 154 
Filter Life Gauge not at 100% when new 155 
Contamination in the work area 156 
15: DIAGNOSTICS 157
Sash Sensors 157 
Keypad 158 

9 
 
Airflow Sensor (optional) 159 
Canopy (optional) 160 
16: BMS DATA OUTPUT CONNECTION 161
Connection Type 161 
Data Output Format 162 
Data Output Rate 162 
Data Output String Definition 163 
Data Output Software Requirements 164 
17: VENTUSTM CANOPY CONNECTION KIT 165
Kit Catalog Numbers 166 
Installation Procedure 166 
Exhaust Damper Installation Procedure 167 
Canopy Switch Wiring Connection 168 
Calibrate for Operation 169 
18: AIRFLOW SENSOR KIT 171
Installation –Type A2 without Ventus Canopy 171 
Installation –Type A2 with Ventus Canopy 173 
Connection to Electronics Module 175 
Configuration (new install only) 176 
Calibration 178 
19: UV LAMP KIT 181
Kit Catalog Numbers 181 
Installation 181 
Configuration 183 

10 
 
20: IV BAR KIT 185
Kit Catalog Numbers 185 
Installation 185 
21: PREFILTER KIT 187
Kit Catalog Numbers (Type A2 and B2 only) 187 
Installation 187 
Attach Prefilter(s) to Towel Catch –G4 Paper 188 
Attach Prefilter(s) to Towel Catch –Aluminum Washable 189 
22: EN ALARM/RELAY CONTACT KIT 190
Installation 190 
Example 1 –Blower Relay Contact (Single Phase AC) 194 
Example 2 –Blower Relay Contact (Three Phase AC) 195 
23: PARTS LIST 196
Type A2 Consumables 196 
Type B2 Consumables 197 
Type C1 Consumables 198 
Advanced Service Components 199 
 

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Labconco Équipement de laboratoire

Labconco

Labconco RapidVap 73200 Series Manuel utilisateur

Labconco

Labconco Protector XL 1124 Series Manuel utilisateur

Labconco

Labconco CentriVap 7812010 Manuel utilisateur

Labconco

Labconco Capture BT 31700-00 Manuel utilisateur

Labconco

Labconco CentriVap 73100 Series Manuel utilisateur

Labconco

Labconco Protector XStream 11041 Series Manuel utilisateur

Labconco

Labconco CentriVap Complete 73150 Series Manuel utilisateur

Labconco

Labconco Protector 3410000 Manuel utilisateur

Labconco

Labconco CentriVap 78110 Series Manuel utilisateur

Labconco

Labconco Purifier Logic+ 30348 Manuel utilisateur

Labconco

Labconco Purifier Axiom 30441 Series Manuel utilisateur

Labconco

Labconco Purifier Class 2 Biological Safety Cabinet Manuel utilisateur

Labconco

Labconco Purifier Logic+ 30132 Manuel utilisateur

Labconco

Labconco CentriVap DNA Systems Manuel utilisateur

Labconco

Labconco Capture BT 31700-00 Manuel utilisateur

Labconco

Labconco FreeZone 7750000 Manuel utilisateur

Labconco

Labconco CApture 3420000 Manuel utilisateur

Labconco

Labconco Protector 1204 Series Manuel utilisateur

Labconco

Labconco FreeZone Plus Manuel utilisateur

Labconco

Labconco Axiom C1 Manuel utilisateur

Labconco

Labconco Precise 5220100 Manuel utilisateur

Labconco

Labconco Protector Premier 10040 Series Manuel utilisateur

Labconco

Labconco Precise CA 5220100 Manuel utilisateur

Labconco

Labconco 5530000 Manuel utilisateur

Manuels Équipement de laboratoire populaires d'autres marques

Qiagen

Qiagen DML 3000 Manuel utilisateur

Queensgate

Queensgate NANOSCAN OP400 Manuel de programmation

Conviron

Conviron GEN1000-GE Manuel utilisateur

Parr Instrument

Parr Instrument 4560 Mode d’emploi

IKA

IKA IC control Manuel utilisateur

Integra

Integra DOSE IT Manuel utilisateur

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manuel utilisateur

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manuel utilisateur

NI PXI-5422 Manuel

Collomix

Collomix Aqix Manuel utilisateur

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuel utilisateur

Ocean Insight

Ocean Insight FLAME-NIR+ Manuel utilisateur

Parker

Parker ALIGN-MG-NA Manuel utilisateur

BD 644787 Manuel utilisateur

DENTAURUM

DENTAURUM Compact Megaplus Manuel utilisateur

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuel utilisateur

VWR

VWR SAS Super IAQ Manuel utilisateur

illumina

illumina MiSeqDx Manuel utilisateur