La Crosse Technology 616-146Av3 Manuel utilisateur

616-146Av3 http://www.lacrossetechnology.com/support/ Page | 1

Model: 616-146Av3

DC: 040317

Atomic Projection Alarm Clock

AAA

Power Adapter

USB

Charge

Port 1A

Time, Alarm with

Snooze

Indoor

Temperature +

Trends

Projection Arm

Rotates 180°

Moon Phase +

Calendar

616-146Av3 http://www.lacrossetechnology.com/support/ Page | 2

GET STARTED

1. Insert the 5.0 volt power cable into the wall outlet, then into the

back of the clock.

2. (Optional), Insert 2 AAA batteries (not included) into the back of the

projection clock. Observe the correct polarity (+ or -).

3. Set time, date, etc.

SET TIME AND DATE

1. Hold the SET/°F/°C button 3 seconds to enter time set mode.

2. Press and release the +/PROJ or -/TIME buttons to adjust values.

Hold for fast adjustment.

3. Press and release the SET/°F/°C button to confirm and move to the next

item.

Time and Date setting order:

1. WWVB (ON/OFF)

2. Time Zone

3. DST Daylight Saving Time (ON/OFF)

4. 12/24 Hour Time Format

5. Hour

6. Minutes

7. Year

8. Month

9. Date

Note: Day of the week sets automatically.

Press the SET/°F/°C button to exit, or wait 20 seconds without pressing

buttons to return to the normal time display.

FAHRENHEIT/CELSIUS

•Press and release the SET/°F/°C button to select Fahrenheit or Celsius

temperature display.

SET TIME ALARM

1. Hold the ALARM button 3 seconds to enter alarm time set mode.

2. Press and release the +/PROJ or -/TIME buttons to adjust values.

3. Press and release the ALARM button to confirm adjustments and move

to the next item.

Alarm Time setting order:

1. Hours

2. Minutes

616-146Av3 http://www.lacrossetechnology.com/support/ Page | 3

ACTIVATE / DEACTIVATE TIME ALARM

•Press and release the ALARM button once to view alarm time.

•Press and release the ALARM button again to activate the alarm.

Bell icon appears.

•Press and release the ALARM button again to deactivate the alarm.

The bell icon disappears.

SNOOZE (Silences alarm temporarily)

•Press and release the SNOOZE/LIGHT button to silence alarm for 9

minutes.

•Zz will show.

•When in snooze mode, press ALARM to stop alarm for one day.

Note: The alarm is crescendo sound. The alarm will sound for 2 minutes and

then shut off completely.

USB CHARGE PORT

Charge a smart phone, camera or other devices when the forecast station is

plugged into a power outlet with the included power adapter.

NOTE: This is a power-output charging port. It does not supply power to the

forecast station.

•Connect your external device’s USB charging cable (not included) to the

USB charging port.

•Charging times will vary.

•USB Power Output: 1A maximum current. Charge 1A devices or

devices that are self-regulating.

MOON PHASE

The moon phase is based on the year, month and date set (manually or by

the WWVB signal). These are the moon phases.

BACKLIGHT AND PROJECTION INTENSITY (TOGETHER)

Press and release the SNOOZE/LIGHT button to adjust the brightness of the

backlight and projection image (together):

•ON High intensity

•ON Low intensity

•OFF

Note: When theAdapter is NOT in use, the High/Low/On/Off features are not

available.

Alarm

Bell Icon

616-146Av3 http://www.lacrossetechnology.com/support/ Page | 4

PROJECTION (On/Off, rotate, projection mode)

Battery Power: Press and release the SNOOZE/LIGHT button to show the

projection for 10 seconds.

Note: Using Battery power, the projection and backlight will come on for 10

seconds when SNOOZE/LIGHT is pressed. Projection will not display

constantly when operating on battery power.

A/C Power Projection ON/OFF:Projection is displayed constantly unless

turned off.

•Hold the +/PROJ button for 3 seconds to turn off the projection.

•Press and release the +/PROJ button to turn on the projection.

Rotate Projection:

•Press and release the PROJECTION button to rotate the projection

image 90 degrees.

•Press and release the PROJECTION button again to rotate another 90

degrees.

Change Projection Modes: Hold, then release the PROJECTION button to

switch projection modes. Watch the projection image to view the changes.

•Time and Indoor Temperature: alternate every 5 seconds (default)

•Time

•Indoor Temperature

MANUAL WWVB RADIO-CONTROLLED TIME SEARCH

•Press and release the -/TIME button to start or stop a manual signal

search. WWVB Icon will flash

For information about WWVB visit:

http://bit.ly/AtomicTime

TEMPERATURE TREND INDICATORS

The temperature (2°F/1°C) trend indicators update every 30 minutes or less.

•Temperature has risen in the past 3 hours.

•Temperature has not changed in the past 3 hours.

•Temperature has fallen in the past 3 hours.

LOW BATTERY ICON

If the icon is displayed in Indoor Temperature section,

replace batteries in the projection clock.

Low

Battery

Icon

WWVB

Icon

616-146Av3 http://www.lacrossetechnology.com/support/ Page | 5

POSITION PROJECTION ALARM

•The projection alarm has a wide base to sit on a desk or table.

•Choose a location 6 feet or more from electronics such as cordless phones,

wireless gaming systems, televisions, microwaves, routers, baby monitors, etc.,

which can prevent signal reception.

•Position near an exterior wall that faces Ft. Collins Colorado for WWVB time

signal reception.

CARE AND MAINTENANCE

•Do not mix old and new batteries

•Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries

•Always purchase the correct size and grade of battery suitable for intended use.

•Replace all batteries of a set at the same time.

•Clean the battery contacts and also those of the device prior to battery installation.

•Ensure the batteries are installed with correct polarity (+ and -).

•Remove batteries from equipment when it is not to be used for an extended time.

•Promptly remove expired batteries.

SPECIFICATIONS

Indoor:

Temperature Range:

+32°F to +122°F (0°C to 50°C)

Interval:

About every 30 seconds

USB Charging Port

USB Output: 1 Amp maximum current

Power:

Primary Power:

AC: HX09-0501500-AU 5-volt AC power adapter (included)

Optional/Battery Backup Optional 2-AAA, IEC, LR3 batteries

(not included)

Battery Life:

Projection Alarm

Battery Backup:

Battery life is over 24 months when using the AC

adapter for primary power

Dimensions:

Projection Alarm:

5.23” L x 1.96” W x 4.33” H (133 x 50 x 110 mm)

WARRANTY AND SUPPORT

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of

purchase) on this product relating to manufacturing defects in materials &

workmanship.

Before returning a product, please contact our friendly customer support or visit our

online help:

Phone: 1-608-782-1610 Online: http://www.lacrossetechnology.com/support/

View full warranty details online at:

http://www.lacrossetechnology.com/support/?type=warranty

616-146Av3 http://www.lacrossetechnology.com/support/ Page | 6

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy, and if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device must not be co-located or operating in conjunction with any other antenna

or transmitter.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may

cause undesired operation.

Caution!

The manufacturer is not responsible for any radio or TV interference caused by

unauthorized changes or modifications to this equipment. Such changes or

modifications could void the user authority to operate the equipment.

duplicated or processed using electronic, mechanical or chemical process without the

written permission of the publisher.

This booklet may contain errors or misprints. The information it contains is regularly

checked and corrections are included in subsequent editions. We disclaim any

responsibility for any technical error or printing error, or their consequences. All

trademarks and patents are recognized.

CANADA STATEMENT

This device complies with CNR Industry Canada license -exempt devices.

Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause

undesired operation of the device.

Table des matières

Autres manuels La Crosse Technology Réveil

La Crosse Technology

La Crosse Technology SOLUNA C79141-MX Manuel utilisateur

La Crosse Technology

La Crosse Technology WT-5442 Manuel utilisateur

La Crosse Technology

La Crosse Technology 616-143v3v2 Manuel utilisateur

La Crosse Technology

La Crosse Technology W88723 Manuel utilisateur

La Crosse Technology

La Crosse Technology VA1 Manuel utilisateur

La Crosse Technology

La Crosse Technology C82929V2 Dimensions

La Crosse Technology

La Crosse Technology WT-2192 Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-8115U-IT Manuel utilisateur

La Crosse Technology

La Crosse Technology 616-143 Manuel utilisateur

La Crosse Technology

La Crosse Technology 616-146 Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-8249U Manuel utilisateur

La Crosse Technology

La Crosse Technology C85135 Dimensions

La Crosse Technology

La Crosse Technology BBB81380 Dimensions

La Crosse Technology

La Crosse Technology 317-1909 Dimensions

La Crosse Technology

La Crosse Technology WS-8256U Manuel utilisateur

La Crosse Technology

La Crosse Technology W85923V4 Manuel utilisateur

La Crosse Technology

La Crosse Technology C85183 Manuel utilisateur

La Crosse Technology

La Crosse Technology 616-1950 Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-8054U Manuel utilisateur

La Crosse Technology

La Crosse Technology 616-1950 Dimensions

La Crosse Technology

La Crosse Technology 602-249V2 Dimensions

La Crosse Technology

La Crosse Technology WS-8157 Manuel utilisateur

La Crosse Technology

La Crosse Technology C89201 Manuel utilisateur

La Crosse Technology

La Crosse Technology 616-1412v4 Manuel utilisateur

Manuels Réveil populaires d'autres marques

Steren

Steren CLK-210 Manuel utilisateur

COP-USA

COP-USA ALCDVR32-SL Manuel utilisateur

Philips

Philips HF3505/70 Manuel technique

Casio

Casio PQ-70 Manuel utilisateur

iHome

iHome IA63 Manuel utilisateur

Coopers

Coopers 9765 Manuel utilisateur

ANJANK

ANJANK AC-190 Mode d’emploi

TFA

TFA 98.1075 Manuel utilisateur

Sharper Image

Sharper Image 204050 Manuel utilisateur

Lumie

Lumie Zest Manuel utilisateur

Dexford

Dexford RCT200 Manuel utilisateur

Philips

Philips AJL303/37B Manuel utilisateur

RST

RST Q754 Manuel utilisateur

iHome

iHome iKT50 Manuel utilisateur

Sony

Sony dash HID-B7 Manuel utilisateur

SVINZ

SVINZ SCC009 Manuel utilisateur

Clas Ohlson

Clas Ohlson 918863 Manuel utilisateur

IKEA

IKEA FNURRA Manuel utilisateur